Search results

From CSDMS
Results 1 – 250 of 800
Advanced search

Search in namespaces:

  • Model:MODFLOW (section Testing)
    available test data sets Test data sets are provided to verify that MODFLOW-2000 is correctly installed and running on the system. The tests may also be
    8 KB (3 words) - 20:16, 16 September 2020
  • Model:SWAT (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:20, 16 September 2020
  • Model:Delft3D (section Testing)
    validation document available for flow module Upload test data sets if available: Describe ideal data for testing controlled laboratory experiment, or well documented
    5 KB (3 words) - 20:15, 16 September 2020
  • Landlab
    data and models, which allows users to test-out Landlab without installing it locally. Landlab has integrated testing to ensure that new code contributions
    4 KB (330 words) - 12:22, 9 November 2023
  • Model:ROMS (section Testing)
    for test problems: http://marine.rutgers.edu/po/index.php?model=test-problems Upload test data sets if available: Describe ideal data for testing We have
    6 KB (5 words) - 20:19, 16 September 2020
  • Webinars
    Title 2022/11/17 Buscombe, Dan  & Goldstein, Evan Machine Learning - Part 2 2022/11/10 Buscombe, Dan  & Goldstein, Evan Machine Learning - Part 1 2022/11/08
    2 KB (70 words) - 08:41, 24 January 2023
  • Model:WRF (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    8 KB (21 words) - 20:19, 16 September 2020
  • Model:OpenFOAM (section Testing)
    if available: Describe available test data sets -- Upload test data sets if available: Describe ideal data for testing --
    4 KB (3 words) - 20:18, 16 September 2020
  • Model:ApsimX (section Testing)
    if available: Describe available test data sets -- Upload test data sets if available: Describe ideal data for testing --
    4 KB (21 words) - 20:14, 16 September 2020
  • 2023 CSDMS meeting-043 (section A coupled benthic-pelagic biogeochemical model for estimating sediment-water exchange of particulates and solutes: sensitivity tests and application to the northern Gulf of Mexico)
    carbonate chemistry and anerobic reactions in the seabed. The updated model is tested for three sites where benthic flux and porewater concentration measurements
    5 KB (412 words) - 13:36, 8 March 2023
  • Model:WAVEWATCH III ^TM (section Testing)
    available: Describe available test data sets ONR test bed and others. Upload test data sets if available: Describe ideal data for testing Field data should be used
    6 KB (195 words) - 20:16, 16 September 2020
  • 2019 CSDMS meeting-082
    and land-atmosphere coupling studies. We modified the CASCade 2 Dimensional SEDiment (CASC2D-SED) model and adapted it to the WRF-Hydro platform. The model
    3 KB (262 words) - 21:16, 7 March 2019
  • Model:Ecopath with Ecosim (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:14, 16 September 2020
  • Model:XBeach (section Testing)
    org for list and test bed Upload calibration data sets if available: Describe available test data sets see http://xbeach.org Upload test data sets if available:
    5 KB (3 words) - 20:18, 16 September 2020
  • 2023 CSDMS meeting-111 (section Testing the Influence of Sediment Cover on Channel Steepness and Erosion Rates in Layered Rocks with the SPACE Model)
    Entrainment (SPACE) model to test how sediment cover affects channel steepness and erosion rates in horizontally layered rocks. We simulate 1.2 million years of landscape
    4 KB (383 words) - 08:02, 1 April 2023
  • Model:VIC (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing http://www.hydro.washington.edu/L
    8 KB (3 words) - 20:16, 16 September 2020
  • 2019 CSDMS meeting-014
    channel steepness and river evolution (Bennett et al., 2016). We further test this hypothesis here. The Central Belt of the Franciscan Complex, a mix of
    6 KB (557 words) - 11:33, 30 March 2019
  • 2022 CSDMS meeting-067
    neighbor fill, they merge. In case studies, the algorithm runs 90–2,600× faster (with a 2,000–63,000× reduction in compute time) than commonly-used iterative
    3 KB (241 words) - 17:27, 15 April 2022
  • Model:ADCIRC (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    8 KB (3 words) - 20:19, 16 September 2020
  • Model:The TELEMAC system (section Testing)
    calibration data sets if available: Describe available test data sets There are some cases for testing on website: http://www.opentelemac.org/index.php?op
    4 KB (3 words) - 20:17, 16 September 2020
  • Model:TOPMODEL (section Testing)
    available test data sets Example of TOPMODEL simulation Upload test data sets if available: Media:TOPMODEL Example.zip Describe ideal data for testing
    10 KB (3 words) - 20:17, 16 September 2020
  • Model:Princeton Ocean Model (POM) (section Testing)
    sets Testing described in various papers (see web page) Upload calibration data sets if available: Describe available test data sets Upload test data sets
    4 KB (3 words) - 20:19, 16 September 2020
  • Model:LISFLOOD (section Testing)
    if available: Describe available test data sets -- Upload test data sets if available: Describe ideal data for testing --
    5 KB (3 words) - 20:14, 16 September 2020
  • Model:SWAN (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    8 KB (3 words) - 20:18, 16 September 2020
  • 2019 CSDMS meeting-114
    community reacts second; and (2) simultaneous/coordinated decisions where both communities make a joint choice. We test how variable up/downdrift property
    5 KB (419 words) - 15:40, 1 April 2019
  • 2019 CSDMS meeting-004
    condition of the frequent 1-2 year recurring storm in North Carolina Coast, which occurred during Hurricane Mathew in 2016. We also tested the mean wave conditions
    3 KB (321 words) - 12:18, 25 March 2019
  • Presenters-0129
    (1) review some combined outcrop-model based studies, (2) discuss how these integrated studies test model and field-based uncertainty, and (3) share a vision
    3 KB (344 words) - 15:11, 20 June 2023
  • Model:FVCOM (section Testing)
    is being tested. See also website for model validations. Upload calibration data sets if available: Describe available test data sets Upload test data sets
    7 KB (3 words) - 20:16, 16 September 2020
  • 2022 CSDMS meeting-105
    CE-QUAL-W2 reveals the extent to which the MCBs are influenced by river input during extreme events and vice versa. A series of sensitivity tests in different
    3 KB (362 words) - 13:46, 14 April 2022
  • Model:FUNWAVE (section Testing)
    f1n, f2n and f3n which are specified in funwave2d.data or funwave1d.data. Binary format is used for these three files to increase I/O speed for 2-D prograams
    4 KB (3 words) - 20:14, 16 September 2020
  • Model:HSPF (section Testing)
    Postal address 2 960 College Station Road Town / City Athens Postal code 30605-2700 State Georgia Country United States Email address test@test.com Phone 706-355-8403
    10 KB (34 words) - 20:14, 16 September 2020
  • Model:HBV (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:13, 16 September 2020
  • STSWM-Publications
    results of shallow water test cases and sensitivity to model parameters. Geoscientific Model Development, 2, 231–251. 10.5194/gmd-2-231-2009 (View/edit entry)
    44 bytes (45 words) - 13:41, 20 December 2019
  • Model:CICE (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:19, 16 September 2020
  • Model:QUAL2K (section QUAL2K)
    description QUAL2K (or Q2K) is a river and stream water quality model that is intended to represent a modernized version of the QUAL2E (or Q2E) model (Brown
    6 KB (3 words) - 20:15, 16 September 2020
  • Model:PHREEQC (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:14, 16 September 2020
  • 2022 CSDMS meeting-080
    from a semi-permanent 10,000 km2 lake within the basin due to enhanced early Holocene Indian Summer Monsoon conditions, and (2) antecedent morphological control
    4 KB (395 words) - 11:48, 22 March 2022
  • 2023 CSDMS meeting-095
    seasonal lake drainage acts like a massive slug test, which is repeated year after year. This “slug test” could help elucidate the size and resilience of
    3 KB (307 words) - 07:34, 1 April 2023
  • Meeting-covid-protocols
    immediately so that COVID-safe testing and, if necessary, quarantine arrangements can be made. If a meeting attendee tests positive for COVID19, all meeting
    3 KB (526 words) - 11:38, 25 April 2022
  • 2022 CSDMS meeting-005
    clinic" is not in the list (1) Component Creation with Landlab, 2) Rapid hypothesis testing and analysis with the open-source delta model pyDeltaRCM, 3) Image
    950 bytes (116 words) - 11:43, 4 February 2022
  • 2022 CSDMS meeting-028
    clinic" is not in the list (1) Component Creation with Landlab, 2) Rapid hypothesis testing and analysis with the open-source delta model pyDeltaRCM, 3) Image
    841 bytes (116 words) - 11:44, 4 February 2022
  • Model:RHESSys (section Testing)
    radiation (KJ/(meters2)/day) Incoming direct shortwave radiation (KJ/(meters2)/day) Incoming diffuse shortwave radiation (KJ/(meters2)/day) Nitrogen deposition
    8 KB (3 words) - 20:18, 16 September 2020
  • Model:SICOPOLIS (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:15, 16 September 2020
  • Model download portal
    shallow-water flows Hydrology, Terrestrial Jayaram Hariharan Underworld2 Code reviewed Underworld2 is an open-source, particle-in-cell finite element code tuned
    2 KB (6,836 words) - 17:21, 3 December 2021
  • Model:PRMS (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:18, 16 September 2020
  • Model:SWMM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    7 KB (3 words) - 20:19, 16 September 2020
  • Test cargo2
    2706
    296 bytes (1 word) - 07:45, 25 October 2021
  • Model:DHSVM (section Testing)
    available test data sets Test datasets available on the web: http://www.hydro.washington.edu/Lettenmaier/Models/DHSVM/documentation.shtml Upload test data sets
    4 KB (3 words) - 20:15, 16 September 2020
  • 2022 CSDMS meeting-081
    up with sediments (i.e., they aggraded). At the start of the Pleistocene ( ~2.5 Ma), the Salt and Gila rivers integrated into these basins, changing them
    3 KB (298 words) - 12:21, 23 March 2022
  • Model:WOFOST (section Testing)
    Upload calibration data sets if available: Describe available test data sets Model test data are available through https://github.com/ajwdewit/pcse and
    8 KB (3 words) - 20:17, 16 September 2020
  • Model:Landlab (section Testing)
    and running 2D numerical models Extended model description Landlab is a Python software package for creating, assembling, and/or running 2D numerical models
    6 KB (21 words) - 12:15, 30 March 2021
  • Model:CAESAR Lisflood (section Testing)
    functions) Operates over a wide range to spatial and time scales (1km2 to 1000km2, <1year to 1000+ years) Easy to use GUI
    4 KB (3 words) - 20:14, 16 September 2020
  • Model:Sedflux (section Testing)
    Edit Model information Sedflux-2.0 is the newest version of the Sedflux basin-filling model. Sedflux-2.0 provides a framework within which individual process-response
    5 KB (169 words) - 20:18, 16 September 2020
  • Model:Caesar (section Testing)
    resolution constraints Has been applied to catchments ranging from 1km^2 to 500km^2, at grid resolutions ranging from 1m to 50m. Describe time scale and
    5 KB (3 words) - 20:16, 16 September 2020
  • Model:MITgcm (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 07:56, 21 June 2021
  • Model:PIHM (section Testing)
    Juniata River 875 km^2: see: http://sourceforge.net/projects/pihmmodel/ Upload test data sets if available: Describe ideal data for testing PIHM is a distributed
    7 KB (3 words) - 20:17, 16 September 2020
  • Model:MICOM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    2 KB (3 words) - 20:14, 16 September 2020
  • Model:GISS GCM ModelE (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    2 KB (3 words) - 20:14, 16 September 2020
  • 2022 CSDMS meeting-083
    sufficiently wide beaches and without shoreline armoring. We continue to test the model to evaluate sensitivity to parameters that may not be well known
    4 KB (426 words) - 19:47, 4 April 2022
  • 2022 CSDMS meeting-058
    We test the method in the Cairngorms, UK, where the upstream geochemistry is very well constrained by the independent G-BASE geochemical survey [2]. We
    4 KB (417 words) - 07:29, 6 April 2022
  • Model:CHILD (section Testing)
    this version is a set of hands-on, tutorial-style exercises that were "beta tested" at the "Summer School and Workshop on Modelling Surface Processes on Geological
    9 KB (371 words) - 20:17, 16 September 2020
  • Model:TauDEM (section Testing)
    Describe available test data sets The Logan River DEM is a small test dataset useful for learning how to use the software Upload test data sets if available:
    5 KB (3 words) - 20:19, 16 September 2020
  • Model:SLAMM 6.7 (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:16, 16 September 2020
  • Model:PISM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:18, 16 September 2020
  • Model:HAMSOM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (10 words) - 20:15, 16 September 2020
  • Model:WRF-Hydro (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    14 KB (3 words) - 11:33, 19 January 2021
  • Model:ISSM (section Testing)
    available test data sets Nightly runs are carried out on every SVN repository commit. Upload test data sets if available: Describe ideal data for testing --
    7 KB (274 words) - 20:14, 16 September 2020
  • Model:Demeter (section Testing)
    if available: Describe available test data sets -- Upload test data sets if available: Describe ideal data for testing --
    4 KB (3 words) - 20:14, 16 September 2020
  • Model:Flex2D (section Flex2D)
    FTCS1D-NonLinear FTCS2D FTCS2D-TerraceDiffusion FillinPitsFlatsDEM Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sh
    3 KB (3 words) - 20:19, 16 September 2020
  • Model:ADI-2D (section ADI-2D)
    FTCS1D-NonLinear FTCS2D FTCS2D-TerraceDiffusion FillinPitsFlatsDEM Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sh
    3 KB (3 words) - 20:17, 16 September 2020
  • Model:FTCS2D (section FTCS2D)
    FTCS1D-NonLinear FTCS2D FTCS2D-TerraceDiffusion FillinPitsFlatsDEM Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sh
    3 KB (3 words) - 20:17, 16 September 2020
  • Model:MFDrouting (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:13, 16 September 2020
  • Model:LavaFlow2D (section LavaFlow2D)
    FTCS1D-NonLinear FTCS2D FTCS2D-TerraceDiffusion FillinPitsFlatsDEM Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sh
    3 KB (3 words) - 20:14, 16 September 2020
  • Model:Flex2D-ADI (section Flex2D-ADI)
    FTCS1D-NonLinear FTCS2D FTCS2D-TerraceDiffusion FillinPitsFlatsDEM Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sh
    3 KB (3 words) - 20:14, 16 September 2020
  • Model:Iceages (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:15, 16 September 2020
  • Model:Channel-Oscillation (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:14, 16 September 2020
  • Model:2DFLOWVEL (section 2DFLOWVEL)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:16, 16 September 2020
  • Model:FractionalNoises2D (section FractionalNoises2D)
    FTCS1D-NonLinear FTCS2D FTCS2D-TerraceDiffusion FillinPitsFlatsDEM Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sh
    3 KB (3 words) - 20:16, 16 September 2020
  • Model:FTCS2D-TerraceDiffusion (section FTCS2D-TerraceDiffusion)
    FTCS1D-NonLinear FTCS2D FTCS2D-TerraceDiffusion FillinPitsFlatsDEM Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sh
    3 KB (3 words) - 20:16, 16 September 2020
  • 2024 CSDMS meeting-094
    computational challenges, often demanding extensive processing time for large-scale 2D flood simulations. While data-driven algorithms have shown promise in improving
    5 KB (364 words) - 13:46, 31 March 2024
  • Model:QTCM (section Testing)
    Atmospheric Sciences, 57, 1741–1766. <1741:AQETCM>2.0.CO;2 10.1175/1520-0469(2000)057<1741:AQETCM>2.0.CO;2 (View/edit entry) 2000 QTCM Model overview 325
    2 KB (3 words) - 20:14, 16 September 2020
  • Model:BOM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:16, 16 September 2020
  • Model:HYPE (section Testing)
    if available: Describe available test data sets -- Upload test data sets if available: Describe ideal data for testing --
    4 KB (3 words) - 15:31, 30 June 2021
  • Model:MFDrouting-Successive (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:18, 16 September 2020
  • Model:Coupled1D (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:15, 16 September 2020
  • Model:StreamPower (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:17, 16 September 2020
  • Model:LITHFLEX2 (section LITHFLEX2)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:14, 16 September 2020
  • Get Lab on CSDMS NB server
    lab" button on the "Create Labs"  page, your lab will be open to the public 2. Add Jupyter notebooks Make sure your notebooks are available in a Github repo
    2 KB (364 words) - 14:21, 22 November 2021
  • Model:SPHYSICS (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:19, 16 September 2020
  • Model:Bedrock Erosion Model (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:19, 16 September 2020
  • Model:Ice-sheet-Glacier-reconstruction (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:13, 16 September 2020
  • Model:Eolian Dune Model (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:16, 16 September 2020
  • Model:Fourier-Bessel-integration (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:15, 16 September 2020
  • Model:Flex1D (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:15, 16 September 2020
  • Model:Spirals1D (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:15, 16 September 2020
  • Model:Plume (section Testing)
    single grainsize plume: > cg1=c(101:200,:); > cg2=c(301:400,:); > imagesc(cg1) > figure > imagesc(cg2) If you want the plume area of all cells with more
    9 KB (913 words) - 20:15, 16 September 2020
  • Model:OlaFlow (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:14, 16 September 2020
  • Model:SedFoam-2.0 (section SedFoam-2.0)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    7 KB (3 words) - 20:19, 16 September 2020
  • Model:Avulsion (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:16, 16 September 2020
  • Presenters-0426
    calibration including: (1) determining an appropriate objective function, (2) major classes of calibration algorithms, (3) interpretation of results. In
    2 KB (225 words) - 15:08, 20 June 2023
  • Model:FillinPitsFlatsDEM (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:18, 16 September 2020
  • Model:Underworld2 (section Underworld2)
    if available: Describe available test data sets -- Upload test data sets if available: Describe ideal data for testing --
    4 KB (21 words) - 20:18, 16 September 2020
  • Model:ParFlow (section Testing)
    directory of test cases that may be automated as a check of the code. Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:18, 16 September 2020
  • Model:Anuga (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:14, 16 September 2020
  • Model:Alpine3D (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    7 KB (3 words) - 08:12, 1 February 2023
  • Model:MIDAS (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:18, 16 September 2020
  • Model:FTCS1D-NonLinear (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:17, 16 September 2020
  • Model:FractionalNoises1D (section Testing)
    Flex1D Flex2D Flex2D-ADI Fourier-Bessel-integration FractionalNoises1D FractionalNoises2D Ice-sheet-Glacier-reconstruction Iceages LavaFlow2D MFDrouting
    3 KB (3 words) - 20:13, 16 September 2020
  • Model:UEB (section Testing)
    if available: Describe available test data sets -- Upload test data sets if available: Describe ideal data for testing --
    5 KB (3 words) - 20:16, 16 September 2020
  • Model:OTIS (section Testing)
    Describe available test data sets See user documentation available at website Upload test data sets if available: Describe ideal data for testing See user documentation
    6 KB (143 words) - 20:19, 16 September 2020
  • Installing a Python distro for testing and development (section Installing Python for testing and development on beach)
    beach, but it's often useful to install a local Python distribution for testing and development. This technique is used frequently by the CSDMS software
    2 KB (302 words) - 14:05, 3 January 2017
  • Model:Gc2d (section Gc2d)
    Edit Model information gc2d a two-dimensional finite difference numerical model that simulates the formation and evolution of temperate valley glaciers
    5 KB (203 words) - 20:14, 16 September 2020
  • TestingExecutorBlanca (section Install and test CSDMS components)
    install directory for this executor is /work/csdms/wmt/_testing. install_dir=/work/csdms/wmt/_testing mkdir -p $install_dir Make sure read and execute bits
    5 KB (779 words) - 12:12, 12 October 2019
  • Model:TopoToolbox (section Testing)
    Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed
    7 KB (366 words) - 20:18, 16 September 2020
  • Model:STWAVE (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:15, 16 September 2020
  • Model:SPARROW (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    6 KB (3 words) - 20:18, 16 September 2020
  • How To IRF (section Unit testing gc2d)
    following steps to convert the gc2d glacier model to a CSDMS component: Convert source code to one of the supported languages Test converted code Create Init
    9 KB (1,317 words) - 14:47, 22 October 2009
  • Model:GNE (section Testing)
    Describe available test data sets Global (GEMS-GLORI), regional, national and literature compilations. A subset used for validation. Upload test data sets if
    5 KB (3 words) - 20:14, 16 September 2020
  • TestingExecutorSiwenna (section Install and test CSDMS components)
    install directory for this executor is /home/csdms/wmt/_testing. install_dir=/home/csdms/wmt/_testing mkdir -p $install_dir Install a Python distribution to
    5 KB (697 words) - 13:56, 1 June 2018
  • Model:STVENANT (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:16, 16 September 2020
  • Model:WAVEREF (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:18, 16 September 2020
  • Model:TopoFlow-Meteorology (section Testing)
    Scalar 100.00000000 (W/m^2) Qn_LW: Scalar 10.00000000 (W/m^2) Save grid timestep: Scalar 60.00000000 (sec) Save ea grids: 0 Case5_2D-ea.rts (mbar) Save es
    8 KB (6 words) - 20:19, 16 September 2020
  • Model:DELTA (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:17, 16 September 2020
  • Model:TopoFlow-Evaporation-Energy Balance (section Testing)
    D_h * (T_air - T_surf) = sensible heat flux (W / m^2) D_n = u_z * κ^2 / LN((z - h_snow) / z0_air)^2 = bulk exchange coeff. (neutrally stable conditions)
    9 KB (8 words) - 20:16, 16 September 2020
  • Model:TopoFlow-Snowmelt-Energy Balance (section Testing)
    Case5_2D-SMrate.rts (m/s) Save hs grids: 0 Case5_2D-hsnow.rts (m) Save sw grids: 0 Case5_2D-hswe.rts (m) Save cc grids: 0 Case5_2D-Ecc.rts (J/m^2) Save
    10 KB (8 words) - 20:16, 16 September 2020
  • Model:SIBERIA (section Testing)
    address 2 Town / City Callaghan Postal code 2308 State Country Australia Email address garry.willgoose@newcastle.edu.au Phone 61 2 49216050 Fax 61 2 49216991
    4 KB (133 words) - 10:48, 14 July 2023
  • 2024 CSDMS meeting-080
    since the last glacial maximum and 2) constrains on the transgression magnitude in Norway and eastern Canada. Both tests show a preference for GIA models
    5 KB (496 words) - 12:46, 21 March 2024
  • Test8/Prioritizing a model to make coupling-ready (refactoring the code with a Basic Model Interface).
    Mariotti, Giulio MarshMorpho2D 2D long-term marsh evolution model based on tidal dispersion Mariotti, Giulio MarshPondModel 2D marsh evolution model focused
    1 KB (110 words) - 10:46, 15 June 2017
  • Model:GEOtop (section Testing)
    Describe available test data sets Please look at the GEOtop website: http://www.slideshare.net/GEOFRAMEcafe/geotop-2008?type=powerpoint Upload test data sets if
    7 KB (3 words) - 20:14, 16 September 2020
  • Model:CLUMondo (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:19, 16 September 2020
  • Model:FLDTA (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:18, 16 September 2020
  • Model:STORM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:16, 16 September 2020
  • Model:YANGs (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:19, 16 September 2020
  • Kettner-Test
    Cliffs , CoastMorpho2D A.k.a. CM2D , Coastal Dune Model 10.5281/zenodo.16161, 10.5281/zenodo.847746 1.0, 2.0, Compact 10.1594/IEDA/100103 2.1, CosmoLand , Coupled1D
    674 bytes (0 words) - 10:32, 15 June 2017
  • Model:LOGDIST (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:18, 16 September 2020
  • Model:SETTLE (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:15, 16 September 2020
  • Model:Glimmer-CISM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:17, 16 September 2020
  • Model:TopoFlow-Snowmelt-Degree-Day (section Testing)
    Case5_2D-SMrate.rts (m/s) Save hs grids: 0 Case5_2D-hsnow.rts (m) Save sw grids: 0 Case5_2D-hswe.rts (m) Save cc grids: 0 Case5_2D-Ecc.rts (J/m^2) Save
    8 KB (8 words) - 20:19, 16 September 2020
  • Model:TopoFlow-Evaporation-Priestley Taylor (section Testing)
    defined as follows: Q_SW = net shortwave radiation (W / m^2) Q_LW = net longwave radiation (W / m^2) T_air = air temperature (deg C) T_surf = surface (snow)
    8 KB (8 words) - 20:17, 16 September 2020
  • Model:ENTRAIN (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:19, 16 September 2020
  • Model:ENTRAINH (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:13, 16 September 2020
  • Model:BEDLOAD (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:19, 16 September 2020
  • Student Modeler Award guidelines
    in an open source language, are of a high quality, are modular, are well tested, run on a variety of platforms, and are user friendly will receive the highest
    3 KB (480 words) - 15:44, 24 August 2023
  • Model:CREST (section Testing)
    available test data sets See: http://hydro.ou.edu/Model/CREST/CREST_downloads.html Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:19, 16 September 2020
  • Model:Diffusion (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    2 KB (3 words) - 20:18, 16 September 2020
  • Model:Inflow (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:16, 16 September 2020
  • Test
    Images on this page are last updated: 2024-02-06, at 16:50 Lorem Ipsum2 is simply dummy text of the printing and typesetting industry. Lorem Ipsum has
    10 KB (1,564 words) - 10:48, 6 February 2024
  • Model:SUSP (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:19, 16 September 2020
  • Model:TURB (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:16, 16 September 2020
  • Model:SVELA (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:16, 16 September 2020
  • Model:WINDSEA (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:19, 16 September 2020
  • Model:LONGPRO (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:17, 16 September 2020
  • PermafrostExecutorSiwenna (section Install and test CSDMS components)
    `netcdf-fortran`, `pymt=0.2` and `csdms-ilamb` using the csdms-stack conda channel (the Bakery), conda install cca-tools netcdf-fortran=4.4.4=5 pymt==0.2 csdms-ilamb
    6 KB (898 words) - 16:43, 8 October 2018
  • Model:CBOFS2 (section CBOFS2)
    Edit Model information Model_help:CBOFS2
    6 KB (5 words) - 20:18, 16 September 2020
  • Model:TopoFlow-Channels-Diffusive Wave (section Testing)
    Save Q grids: 1 Case5_2D-Q.rts (m^3/s) Save u grids: 0 Case5_2D-u.rts (m/s) Save d grids: 0 Case5_2D-d.rts (m) Save f grids: 0 Case5_2D-f.rts (none) Save
    11 KB (8 words) - 20:17, 16 September 2020
  • Model:GeoClaw (section Testing)
    available test data sets http://www.clawpack.org/gallery/gallery_geoclaw.html Upload test data sets if available: Describe ideal data for testing
    5 KB (21 words) - 20:14, 16 September 2020
  • Model:LITHFLEX1 (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:15, 16 September 2020
  • Model:ELCIRC (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:14, 16 September 2020
  • Model:TopoFlow-Channels-Kinematic Wave (section Testing)
    Save Q grids: 1 Case5_2D-Q.rts (m^3/s) Save u grids: 0 Case5_2D-u.rts (m/s) Save d grids: 0 Case5_2D-d.rts (m) Save f grids: 0 Case5_2D-f.rts (none) Save
    11 KB (8 words) - 20:15, 16 September 2020
  • Presenters-0108
    meaningful tests involve comparing predictions and measured values and tests can be conducted daily, hourly or even more frequently. The benchmarking tests in
    4 KB (468 words) - 12:05, 8 August 2018
  • Model:WBMsed (section Testing)
    Qs=ϖBQ¯0.31A0.5RT for T⩾2∘C Qs=2ϖBQ¯0.31A0.5R for T<2∘C Qs - aver. sediment flux (kg/s) ϖ - coefficient of proportionality (kg s−1 km−2 °C−1) (=0.02) B - =L(1−Te)
    5 KB (3 words) - 08:49, 20 August 2022
  • Model:TopoFlow-Diversions (section Testing)
    long integer; calendar index) ID2 (end pixel ID as long integer; calendar index) time (travel time between ID1 and ID2, in minutes) nd (number of durations
    7 KB (6 words) - 20:19, 16 September 2020
  • Model:Flexure (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (8 words) - 20:19, 16 September 2020
  • Model:TopoFlow-Evaporation-Read File (section Testing)
    step: Scalar 10800.00000000 (sec) ET rate: Grid_Sequence Space-time_Rain_Test/Rain_TEST.rts (mm/hr) Input format ASCII, Binary Other input format Describe output
    6 KB (8 words) - 20:17, 16 September 2020
  • Model:TopoFlow-Channels-Dynamic Wave (section Testing)
    Save Q grids: 1 Case5_2D-Q.rts (m^3/s) Save u grids: 0 Case5_2D-u.rts (m/s) Save d grids: 0 Case5_2D-d.rts (m) Save f grids: 0 Case5_2D-f.rts (none) Save
    12 KB (8 words) - 20:17, 16 September 2020
  • 2023 CSDMS meeting-020
    prototyping approach supports proof-of-concept development and model hypothesis testing, particularly for domain experts who may be more comfortable in Python and
    4 KB (344 words) - 07:32, 1 April 2023
  • Model:ChesROMS (section Testing)
    for test problems: http://marine.rutgers.edu/po/index.php?model=test-problems Upload test data sets if available: Describe ideal data for testing We have
    6 KB (5 words) - 20:15, 16 September 2020
  • Model:Subside (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:16, 16 September 2020
  • Model:TopoFlow-Infiltration-Smith-Parlange (section Testing)
    timestep: Scalar 60.00000000 (sec) Save v0 grids: 0 Case5_2D-v0.rts (m/s) Save I grids: 0 Case5_2D-I.rts (m) Save pixels timestep: Scalar 60.00000000 (sec)
    9 KB (8 words) - 20:19, 16 September 2020
  • Model:Compact (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:16, 16 September 2020
  • Model:Bio (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    2 KB (3 words) - 20:17, 16 September 2020
  • Model:LinearDiffuser (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:15, 16 September 2020
  • Model:LOADEST (section Testing)
    Describe available test data sets See applications described in software documentation http://water.usgs.gov/software/loadest/doc/ Upload test data sets if available:
    5 KB (3 words) - 20:20, 16 September 2020
  • CarboCAT-Publications
    104453. 10.1016/j.cageo.2020.104453 (View/edit entry) 2020 Model overview 2 Masiero, Isabella; Burgess, Peter; Hollis, Cathy; Manifold, Lucy; Gawthorpe
    44 bytes (45 words) - 13:02, 20 December 2019
  • Model:Erode (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing [[Describe ideal data::Same as used
    4 KB (5 words) - 20:15, 16 September 2020
  • Model:Bing (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:17, 16 September 2020
  • Model:GOLEM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing [[Describe ideal data::See: Tucker
    4 KB (3 words) - 20:15, 16 September 2020
  • Model:TopoFlow-Infiltration-Green-Ampt (section Testing)
    timestep: Scalar 60.00000000 (sec) Save v0 grids: 0 Case5_2D-v0.rts (m/s) Save I grids: 0 Case5_2D-I.rts (m) Save pixels timestep: Scalar 60.00000000 (sec)
    9 KB (8 words) - 20:19, 16 September 2020
  • Model:OverlandFlow (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:13, 16 September 2020
  • Model:Terrainbento (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (67 words) - 20:17, 16 September 2020
  • Building Dakota on Ubuntu 12.04 LTS
    4-public.src Compile: make Test the build (this takes awhile, and only 71% of the tests succeeded for my build): cd test && make test Install: cd .. make install
    6 KB (802 words) - 17:30, 19 February 2018
  • PbsExecutorSiwenna (section Install and test CSDMS components)
    install and test a particular CSDMS component. Currently installed components: BenchmarkIngestTool ILAMB ModelIngestTool We installed ILAMB above. Test it by
    4 KB (695 words) - 14:53, 15 March 2019
  • CSDMS 2016 annual meeting poster WeiLuo (section Earth surface modeling for education: is it effective? Two semesters of classroom tests with WILSIM-GC)
    groups there were statistically significant growth in scores from pre-test to post-test [F(1, 47) = 25.82, p < .001], but the growth in scores between the
    5 KB (673 words) - 17:23, 1 June 2016
  • Model:RiverWFRisingBaseLevelNormal (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (5 words) - 20:18, 16 September 2020
  • Model:DeltaRCM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (21 words) - 20:19, 16 September 2020
  • Model:ILAMB (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:17, 16 September 2020
  • Model:TopoFlow-Infiltration-Richards 1D (section Testing)
    Upload calibration data sets if available: Describe available test data sets Available test data sets: Treynor watershed, in the Nishnabotna River basin
    9 KB (8 words) - 20:18, 16 September 2020
  • Model:HydroTrend (section Testing)
    is added in the file name. For example if the simulation contains 2 epochs you need 2 hypsometry files named HYDRO0.HYPS and HYDRO1.HYPS. This is the format
    31 KB (1,490 words) - 11:20, 24 January 2024
  • Model:ALFRESCO (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:17, 16 September 2020
  • Model:WBM-WTM (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:19, 16 September 2020
  • Model:SPACE (section Testing)
    with Alluvium Conservation and Entrainment model, a Landlab component for 2-D calculation of fluvial sediment transport and bedrock erosion. SPACE was
    7 KB (60 words) - 20:17, 16 September 2020
  • Model:NormalFault (section Testing)
    fault_trace = {'x1': float, 'y1': float, 'x2': float, 'y2': float} where the vector from `(x1, y1)` to `(x2, y2)` defines the strike of the fault trace.
    5 KB (8 words) - 20:15, 16 September 2020
  • Model:TopoFlow-Saturated Zone-Darcy Layers (section Testing)
    Upload calibration data sets if available: Describe available test data sets Available test data sets: Treynor watershed, in the Nishnabotna River basin
    6 KB (9 words) - 20:17, 16 September 2020
  • Model:TopoFlow-Data-HIS (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    2 KB (7 words) - 20:17, 16 September 2020
  • Model:FwDET (section Testing)
    available: Describe available test data sets Upload test data sets if available: Media:FwDET DemoData2.zip Describe ideal data for testing One of the case studies
    7 KB (3 words) - 07:20, 24 August 2022
  • PermafrostExecutorBlanca (section Install and test CSDMS components)
    csdms-permamodel-frostnumbergeo csdms-cruaktemp Test a component (here, FnM) by starting a Python session in $install_dir/test in an interactive Slurm session and
    5 KB (702 words) - 13:39, 7 September 2018
  • Model:GSDCalculator (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:18, 16 September 2020
  • Model:TOPOG (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:16, 16 September 2020
  • Model:GSFLOW (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:18, 16 September 2020
  • Model:REF-DIF (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (3 words) - 20:17, 16 September 2020
  • Model:AquaTellUs (section Testing)
    still available and can be used as a test data set. Upload test data sets if available: Describe ideal data for testing Boundary conditions like river discharge
    6 KB (5 words) - 20:15, 16 September 2020
  • Model:GIPL (section Testing)
    Media:Sample.zip Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    6 KB (133 words) - 20:17, 16 September 2020
  • Model:CoastMorpho2D (section CoastMorpho2D)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 11:50, 24 January 2024
  • Model:SNOWPACK (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 08:15, 1 February 2023
  • 2023 CSDMS meeting-102
    particles that act as a protective layer to finer sediment. In this study, we test if resulting hysteresis patterns could be controlled by the extent to which
    6 KB (456 words) - 13:15, 2 April 2023
  • Model:DepthDependentTaylorDiffuser (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    6 KB (3 words) - 20:17, 16 September 2020
  • Model:SubsidingFan (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:16, 16 September 2020
  • Model:FallVelocity (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:19, 16 September 2020
  • Model:RecircFeed (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:16, 16 September 2020
  • Model:Acronym1 (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:16, 16 September 2020
  • Model:RouseVanoniEquilibrium (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:19, 16 September 2020
  • Model:Frost Model (section Testing)
    if available: Describe available test data sets N/A Upload test data sets if available: Describe ideal data for testing N/A
    5 KB (13 words) - 20:15, 16 September 2020
  • Model:CryoGrid3 (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:14, 16 September 2020
  • Model:UMCESroms (section Testing)
    for test problems: http://marine.rutgers.edu/po/index.php?model=test-problems Upload test data sets if available: Describe ideal data for testing We have
    6 KB (3 words) - 20:19, 16 September 2020
  • Model:Hogback (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:17, 16 September 2020
  • MIDAS-Publications
    Epithermal Mineralization. Economic Geology, 98, 409–424. 10.2113/gsecongeo.98.2.409 (View/edit entry) 2003 Model application 36 Merriam, Daniel F.; Davis,
    44 bytes (45 words) - 13:26, 20 December 2019
  • Model:BackwaterCalculator (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:17, 16 September 2020
  • Model:Cyclopath (section Testing)
    dimensions 2D, 3D Spatial extent Model domain Marine One-line model description A 2D/3D model of carbonate cyclicity Extended model description A 2D or 3D
    4 KB (3 words) - 16:13, 21 April 2021
  • Model:GeoTiff Data Component (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (50 words) - 16:37, 29 March 2022
  • Model:Badlands (section Testing)
    available test data sets examples description provided with the documentation http://github.com/badlands-model/Badlands-doc/releases Upload test data sets
    5 KB (3 words) - 20:14, 16 September 2020
  • Model:MARM5D (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:15, 16 September 2020
  • Model:Vegetation (section Testing)
    transpiration (KgCO2Kg-1H2O). LAI_max: float, optional Maximum leaf area index (m2/m2). cb: float, optional Specific leaf area for green/live biomass (m2 leaf g-1
    6 KB (8 words) - 20:19, 16 September 2020
  • Model:Kudryavtsev Model (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (13 words) - 20:18, 16 September 2020
  • Model:PotentialEvapotranspiration (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    6 KB (8 words) - 20:15, 16 September 2020
  • Model:DeltaSIM (section Testing)
    fluctuation, making it a great test data set for coastline shifts. Upload test data sets if available: Describe ideal data for testing Known boundary conditions
    5 KB (3 words) - 20:15, 16 September 2020
  • Model:Sakura (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:17, 16 September 2020
  • Model:GEOMBEST++ (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing Sample input and output files are
    5 KB (3 words) - 20:13, 16 September 2020
  • Model:CMFT (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:17, 16 September 2020
  • Model:AR2-sinuosity (section AR2-sinuosity)
    = b_1*theta(i-1) + b_2*theta(i-2) + epsilon(i) where theta is the channel direction, i is the centerline node index, b_1 and b_2 are coefficients, and
    5 KB (3 words) - 20:29, 26 July 2021
  • Model:LEMming2 (section LEMming2)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (3 words) - 20:14, 16 September 2020
  • Model:SELFE (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (3 words) - 20:16, 16 September 2020
  • Model:STSWM (section Testing)
    if available: Media:Test7.tar.gz Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    2 KB (3 words) - 20:18, 16 September 2020
  • Model:GEOMBEST (section Testing)
    available: Describe available test data sets Upload test data sets if available: Media:SampleSimulation.zip Describe ideal data for testing
    4 KB (3 words) - 20:19, 16 September 2020
  • Model:DLBRM (section Testing)
    Lakes since its development in the 1980s. Upload test data sets if available: Describe ideal data for testing
    6 KB (3 words) - 20:19, 16 September 2020
  • Model:AgDegNormal (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (5 words) - 20:14, 16 September 2020
  • Model:SteadyStateAg (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:18, 16 September 2020
  • Model:BackwaterWrightParker (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:17, 16 September 2020
  • Model:DeltaNorm (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (5 words) - 20:18, 16 September 2020
  • Model:WPHydResAMBL (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:19, 16 September 2020
  • Model:DeltaBW (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (5 words) - 20:14, 16 September 2020
  • Model:AgDegBW (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (5 words) - 20:15, 16 September 2020
  • Model:Acronym1D (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:18, 16 September 2020
  • Model:Acronym1R (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    3 KB (5 words) - 20:18, 16 September 2020
  • Model:TopoFlow (section Testing)
    Saturated Zone-Darcy Layers. TopoFlow can also be linked to the GC2D glacier model. See: GC2D. Additional components can be used to prepare some of the input
    30 KB (3,025 words) - 20:18, 16 September 2020
  • Model:IceFlow (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    4 KB (39 words) - 20:15, 16 September 2020
  • Model:CarboCAT (section Testing)
    2008. Downloadable version here is still a prototype and requires further testing. Development is ongoing, mostly focussed on development of sediment transport
    4 KB (98 words) - 20:19, 16 September 2020
  • Model:MarshMorpho2D (section MarshMorpho2D)
    MarshMorpho2D version: V2.0 Doi: 10.5281/zenodo.3768862 Download MarshMorpho2D version: V1.0 Doi: 10.5281/zenodo.1218091 Download MarshMorpho2D version:
    6 KB (3 words) - 11:23, 24 January 2024
  • Model:TaylorNonLinearDiffuser (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    5 KB (8 words) - 20:19, 16 September 2020
  • Model:QUODDY (section Testing)
    sets if available: Describe available test data sets Upload test data sets if available: Describe ideal data for testing
    2 KB (3 words) - 20:18, 16 September 2020
  • Model:SoilInfiltrationGreenAmpt (section Testing)
    and resolution constraints This component has been tested on the reach and watershed scale (<= 100 km^2), but can likely run effectively on even larger scales
    6 KB (3 words) - 20:18, 16 September 2020

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://csdms.colorado.edu/wiki/Special:Search"