Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

Model:FACET + (DEM, National Hydrography Dataset Plus High Resolution)
Model:GSSHA + (DEM, land-use/land-cover, stream channels, … DEM, land-use/land-cover, stream channels, precipitation, soils, aquifer maps. These index maps are used to classify catchment parameters related to overland/channel flow, soil/aquifer hydraulic properties, soil erodibility, contaminant loadings, etc. Model setup is greatly enhanced by the use of the US Dept. of Defense Watershed Modeling System (WMS), which serves as an interface between GSSHA and Arc/Infoas an interface between GSSHA and Arc/Info)
Model:GSFLOW-GRASS + (DEM, rainfall, temperature)
Model:Non Local Means Filtering + (DEM: A DEM in *.flt binary format (as gene … DEM: A DEM in *.flt binary format (as generated by ARC GIS)Search Window Radius: The distance around the centre cell in which to evaluate the means (in pixels).Similarity Window Radius: The distance around neighbouring cells over which to calculate means (in pixels).Degree of filtering: The weighting for the gaussian kernel controlling the strength of filtering and therefore the decay of weights as a function of distance from the centre of the kernel.of distance from the centre of the kernel.)
Model:Lake-Permafrost with Subsidence + (Daily average solar radiation for location (at surface).)
Model:WEPP + (Daily climate input (temperatures, precipi … Daily climate input (temperatures, precipitation depth, duration, Tp, Ip, wind info); slope input (distance downslope, slope at points, profile width, aspect); soil input (infiltration & erodibility parameters, soil layer depth, texture, organic matter, CEC, etc.; cropping/management input - plant growth parameters, residue decomposition parameters, tillage operation parameters, residue management parameters, dates of operations (planting, harvest, tillage, residue management, etc.); irrigation input - type of irrigation, date(s) of irrigation, application rates, etc.; channel parameters input - channel shape, width, slope, roughness, etc.; impoundment parameters input - type of impoundment (1. Drop Spillway 2. Perforated Riser 3. Culvert 4. Emergency Spillway or Open Channel 5. Rock Fill Check Dam 6. Filter Fence / Straw Bales / Trash Barriers 7. User Specified Stage-Discharge Relationship, parameter inputs specific to each impoundment type; watershed structure file - describes how all hillslopes, channels, and impoundments in a watershed are linked.s, and impoundments in a watershed are linked.)
Model:DR3M + (Daily precipitation, daily evapotranspirat … Daily precipitation, daily evapotranspiration, and short-interval precipitation are required. Short-interval discharge is required for the optimization option and to calibrate the model. These time series are read from a WDM file. Roughness and hydraulics parameters and sub-catchment areas are required to define the basin. Six parameters are required to calculate infiltration and soil-moisture accounting. Up to three rainfall stations may be used. Two soil types may be defined. A total of 99 flow planes, channels, pipes, reservoirs, and junctions may be used to define the basin.junctions may be used to define the basin.)
Model:HSPF + (Data needs for HSPF can be extensive. HSP … Data needs for HSPF can be extensive. HSPF is a continuous simulationprogram and requires continuous data to drive the simulations. At a minimum,continuous rainfall records are required to drive the runoff model andadditional records of evapotranspiration, temperature, and solar intensityare desirable. A large number of model parameters can be specified althoughdefault values are provided where reasonable values are available. HSPF isa general-purpose program and special attention has been paid to cases whereinput parameters are omitted. In addition, option flags allow bypassing ofwhole sections of the program where data are not available. the program where data are not available.)
Model:The TELEMAC system + (Data that are used for TELEMAC model runs … Data that are used for TELEMAC model runs are:a. Initial condition: A ‘CONSTANT ELEVATION’ is prescribed throughout the model. This initializes the free surface elevation at a constant value supplied by the keyword “INTIAL ELEVATION''.b. Bathymetry.c. Wind Data.d. Tide Dataother parameters are given according to the modules are usedre given according to the modules are used)
Model:SISV + (Described in text files usr_input.txt and usr_IC.txt. Used to specify flow parameters (Re, Vs, ...), geometrical parameters (Lx, Ly, ...) and solver parameters (Nx, Ny))
Model:GEOMBEST-Plus + (Description: ''Note: See also the GEOMBEST … Description:''Note: See also the GEOMBEST+ Users Guide'', section 6 A minimum of four excel files are required to run a GEOMBEST-Plus simulation: an “erosionresponse” file, an “accretionresponse” file, a “run#” file, and a “tract#” file. If the simulation involves a single coastal tract then the files must be titled “erosionresponse”, “accretionreponse”, “run1” file and “tract1.” Quasi-3D simulations require additional files with sequential numbers. For example a simulation involving 3 tracts within a littoral cell also requires a “run2” and “run3” file as well as a “tract2” and “tract3” file. These files must conform to the strict format outlined in the following sections. If you are running multiple simulations of the same tract, you can use the multiple input and output files to keep track of your simulations. Caution: Note that the run# and tract# files will have the same name (tract1, run1, etc., see below) for all simulations and so attention to organization is critical. We suggest noting the changes made in each simulation in a readme file and then moving this file, as well as the input and output folders for each simulation, to a unique folder having an identifying name. Our convention, for example, has been to name each run with using the date and run number on that date as the identifier, e.g., the first simulation run on February 20, 2010 would be titled 02_20_10_01and would be placed in a folder having this name.'''6.1: “erosionresponse” file''' '''6.2: “accretionresponse” file''' '''6.3: “run#” file''' '''6.4: “tract#” file'''t;br> '''6.3: “run#” file''' '''6.4: “tract#” file''')
Model:TauDEM + (Digital elevation model)
Model:OTTAR + (Discharge, channel properties)
Model:Kirwan marsh model + (Does not require any input data, but if desired, model can run from files describing sea level and/or the elevations of an existing marsh.)
Model:CellularFanDelta + (Domain dimensions and cell size (regular 2 … Domain dimensions and cell size (regular 2D grid). Initial condition.Locations and rates of sediment and water influxes. Subsidence pattern and rate. Sea level curve. (Presently all boundary conditions are constant, but could vary in space and time in future versions)vary in space and time in future versions))
Model:BRaKE + (Domain size/length/spacing, time to run, t … Domain size/length/spacing, time to run, timestep, hillslope response timescale, baselevel lowering rate, bed erodibility, block erodibility, bed critical shear stress, block critical shear stress, block delivery coefficient, initial block size, roughness length scale, channel width, mean discharge, discharge variability, and data recording time interval.ability, and data recording time interval.)
Model:HydroTrend + (Drainage basin properties (river networks, hypsometry, relief, reservoirs). biophysical parameters (temperature, precipitation, evapo-transpiration, and glacier characteristics).)
Model:SFINCS + (Elevation file and a mask file designating boundary cells, active cells, and inactive cells)
Model:GEOMBEST + (Excel files. See User's Guide and Moore et al., 2010)
Model:1DBreachingTurbidityCurrent + (Excel sheet. User can change initial geome … Excel sheet. User can change initial geometry data (slope at top of breach, initial height of breach face, initial bed slope in quasi-horizontal region, initial location of breach face, initial length of quasi-horizontal region); sediment grain size distribution; sediment properties (bed porosity, breach porosity, bed friction coefficient, wall friction coefficient, submerged specific gravity); and time evolution (time step, number of time steps, initial number of nodes in horizontal, print interval, calculation time).zontal, print interval, calculation time).)
Model:SVELA + (Flow velocity, friction slope, hydraulic radius, and bed roughness)
Model:WRF-Hydro + (For a complete explanation of input parame … For a complete explanation of input parameters please see the WRF-Hydro Technical Description https://ral.ucar.edu/projects/wrf_hydro/technical-description-user-guideWRF-Hydro requires a number of input files describing the model domain, parameters, initialconditions, hydrologic routing, and when run in a standalone configuration, meteorological forcing files.nfiguration, meteorological forcing files.)
Model:DLBRM + (For every cell in the watershed grid, dail … For every cell in the watershed grid, daily precipitation and air temperature, solar isolation, elevation, slope, flow direction, land use, depths (cm) of USZ (Upper Soil Zone) and LSZ (Lower Soil Zone), available water capacity (%) of USZ and LSZ, soil texture, permeability (cm/h) of USZ and LSZ, Manning's coefficient values, and daily flows (Changsheng He and Thomas E. Croley II, 2007).ngsheng He and Thomas E. Croley II, 2007).)
Model:TopoFlow-Diversions + (For sources and sinks, the following infor … For sources and sinks, the following information must be provided, each on its own line: ID (source pixel ID as long integer; calendar index) nd (number of durations and flow rates) durations (vector of durations in minutes) flow rates (vector of discharges in m^3/sec)For canals, the following information must be provided, again with each entry on a separate line in the text file: ID1 (start pixel ID as long integer; calendar index) ID2 (end pixel ID as long integer; calendar index) time (travel time between ID1 and ID2, in minutes) nd (number of durations and flow rates) durations (vector of durations in minutes) flow rates (vector of discharges in m^3/sec)Canals are currently assumed to be lossless, so that the flow rates at the two ends are identical, but lagged by the travel time. The behavior of this component is controlled with a configuration (CFG) file, which may point to other files that contain input data. Here is a sample configuration (CFG) file for this component: Method code: 0 Method name: Standard Use sources: 0 Treynor_sources.txt (N/A) Use sinks: 0 Treynor_sinks.txt (N/A) Use canals: 0 Treynor_canals.txt (N/A) Treynor_canals.txt (N/A))
Model:WACCM-EE + (GCM initial conditions files (netcdf) files describe initial state of atmosphere up ~km 140)

Model:TopoToolbox + (GeoTiff, ESRI ASCII digital elevation model)

Model:LateralVerticalIncision + (Geometric parameters of river reach and erosion capacity.)
Model:DeltaClassification + (Geometric parameters on delta shapes deriv … Geometric parameters on delta shapes derived from satellite data. To run this code, the following shape files are required:• network shapefile, containing the river network extracted from satellite imagery• island shapefile, containing the land masses or islands of the delta• patch shapefile, containing the outline of channelspefile, containing the outline of channels)
Model:Pllcart3d + (Geometrical parameters: Nx, Ny, Nz, X1, X2, Y1, Y2, Z1, Z2; Flow parameters: Reynolds, Peclet, Viscosity Ratio; Flags: resume simulation, add wave perturbation.)
Model:LOADEST + (Given a time series of streamflow, additional data variables, and constituent concentration, LOADEST assists the user in developing a regression model for the estimation of constituent load (calibration).)
Model:VIC + (Global Parameter File user_def.h File Meteorological Forcing Files Soil Parameter File Vegetation Library File Vegetation Parameter File (Optional) Initial State File (Optional) Elevation Band File (Optional) Lake/Wetland Parameter File)
Model:SETTLE + (Grain size and density)
Model:GroundwaterDupuitPercolator + (Gridded elevation, aquifer base elevation. Hydraulic conductivity, porosity, recharge.)
Model:Bedrock Fault Scarp + (HILLSLOPE_LENGTH: length of hillslope, in … HILLSLOPE_LENGTH: length of hillslope, in metersNUMBER_OF_NODES: number of model nodes (initially)EROSION_RATE: slope-normal erosion rate in m/yrTHRESHOLD_SLOPE: threshold slope angle (m/m)THROW_RATE: fault throw rate, meters per yearFAULT_DIP: fault dip angle, degreesSEISMIC_INTERVAL: Time interval between earthquakes, in yearsRUN_DURATION: duration of run in yearsDT: time step duration in yearsOPT_ERO_VAR: option for time variation in erosion rateAMPLITUDE: amplitude of sinusoidal variation (m/yr)PERIOD: period of sinusoidal variation (yr)PHASE: phase offset for sinusoidal variation (degrees)DEL18O_FILENAME: name of file containing oxygen isotope curveDEL18O_POWER: exponentMIN_ERORATE:OPT_PLOT: option for plottingOPT_EPS_PLOT: option for output to .eps filePLOT_INTERVAL: time interval for plotting, in yearsRVAL: time interval for plotting, in years)
Model:Zscape + (INTEGER NXPROB INTEGER TIMESTEPS double pr … INTEGER NXPROBINTEGER TIMESTEPSdouble precision DIFFUSIONdouble precision DELX,DELT* PARAMETER (NXPROB=1000), c dimension of problem grid* PARAMETER (TIMESTEPS=50000), c number of time steps* PARAMETER (DIFFUSION=1d-3), c metres/year - a very high diffusion value* PARAMETER (DELX=0.1d0), c grid spacing in metres* PARAMETER (DELT=1d0), c time step in yearsPARAMETER (DELT=1d0), c time step in years)
Model:SNAC + (In XML format, the following groups of par … In XML format, the following groups of parameters are specified:simulation control group: total model time, time step, damping, etc.plugins: elasticity, viscoelasticity, temperature solver, etc.domain description group: domain size, element numbers, etc.initial and boundary conditions groupetc. initial and boundary conditions group)
Model:CoastMorpho2D + (Initial bathymetry Boundary conditions Time series of waves, wind, storm surges Various hydrodynamics and sedimentary parameters)
Model:SBEACH + (Initial beach profiles, time series of storm wave heights, periods, and storm water levels)
Model:CMFT + (Initial bottom configuration, wind and tide characteristics, sea level rise rate, water column sediment concentration at the boundary.)
Model:Shoreline + (Initial coastline curve (array of xy pairs), depth of closure, a time series of wind speeds and angles, sediment grainsize, coastal bluff heights, a variety of configuration flags)
Model:MarshMorpho2D + (Initial elevation (z) grid with cell type (A))
Model:MARSSIM + (Initial elevation file. File specifying boundary conditions, run time, process options, and parameter values.)
Model:Erode + (Initial land surface (several built-in opt … Initial land surface (several built-in options), number of timesteps, DEM grid dimensions, DEM grid cell dimensions, R = "geomorphic" rainrate (m/yr), U=uplift rate (mm/yr), BLR = base-level lowering rate (mm/yr), Kf="erodibility coefficient (m^3/yr)^(1-m), m = area/discharge exponent, n = slope exponent, p = area-discharge exponent, toggles for different types of boundary conditions (e.g. periodic), DEM georeferencing info (bounding box, pixel geometry, etc.) info (bounding box, pixel geometry, etc.))
Model:GPM + (Initial topography. Initial subsurface la … Initial topography.Initial subsurface layering, if any.Properties of existing rocks/sediments.Sea-level change curve.Sources of flow and sediment, sources of wave action, boundary conditions Externally imposed vertical tectonics as a function of horizontal position and timea function of horizontal position and time)
Model:HBV + (Input data are observations of precipitation, air temperature and estimates of potential evapotranspiration.)
Model:AlluvStrat + (Input file: channel width and depth, a few others)
Model:ESCAPE + (Input files for eSCAPE are based on YAML s … Input files for eSCAPE are based on YAML syntax. domain: definition of the unstructured grid containing the vtk grid filename and the associated field (here called Z) as well as the flow direction method to be used flowdir that takes an integer value between 1 (for SFD) and 12 (for Dinf) and the boundary conditions (bc: ‘flat’, ‘fixed’ or ‘slope’)time: the simulation time parameters defined by start, end, tout (the output interval) and dt (the internal time-step).Follows the optional forcing conditions:sea: the sea-level declaration with the relative sea-level position (m) and the sea-level curve which is a file containing 2 columns (time and sea-level position).climatic & tectonic have the same structure with a sequence of events defined by a starting time (start) and either a constant value (uniform) or a map.Then the parameters for the surface processes to simulate:spl: for the stream power law with a unique parameter Ke representing the The erodibility coefficient which is scale-dependent and its value depend on lithology and mean precipitation rate, channel width, flood frequency, channel hydraulics. It is worth noting that the coefficient m and n are fixed in this version and take the value 0.5 & 1 respectively.diffusion: hillslope, stream and marine diffusion coefficients. hillslopeK sets the simple creep transport law which states that transport rate depends linearly on topographic gradient. River transported sediment trapped in inland depressions or internally draining basins are diffused using the coefficient (streamK). The marine sediment are transported based on a diffusion coefficient oceanK. The parameter maxIT specifies the maximum number of steps used for diffusing sediment during any given time interval dt.Finally, you will need to specify the output folder:output: with dir the directory name and the option makedir that gives the possible to delete any existing output folder with the same name (if set to False) or to create a new folder with the give dir name plus a number at the end (e.g. outputDir_1 if set to True)umber at the end (e.g. outputDir_1 if set to True))
Model:LTRANS + (Input files: # the NetCDF files from the R … Input files:# the NetCDF files from the ROMS hydrodynamic model# a comma delimited file that contains the particle locations, # comma delimited files that contain habitat boundaries for the Settlement Module. The latter is only needed if the Settlement Module is turned on.ded if the Settlement Module is turned on.)
Model:IDA + (Input flow directions: 8 bit unsigned in … Input flow directions: 8 bit unsigned integers The numbers corresponding to each of the 9 possible flow directions are shown below: 32 64 128 16 0 1 8 4 2 So a cell with the value '1' means that the flow in that cell goes to the East, while a value of '32' means that the cell's flow goes to the North West. The value '0' implies that the cell is a sink and flow does not leave it Row major order is used.not leave it Row major order is used.)
Model:QDSSM + (Input is in the form of values per time st … Input is in the form of values per time step for the following variables: files of rain fall, river inlet, sea-level, substratum thickness, tectonics, subsidence, while the model is calibrated through environmental coefficients, threshold slopes, threshold discharge, and set for interval time steps, number of time steps, environmental coefficients (m2/yr) and substratum grain size.icients (m2/yr) and substratum grain size.)
Model:CVPM + (Input parameters are provided through several user-supplied files (see the CVPM modeling system user's guide).)