Search by property

From CSDMS

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Describe post-processing software" with value "See: http://adcirc.org". Since there have been only a few results, also nearby values are displayed.

Showing below up to 24 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

    

List of results

  • Model:Pllcart3d  + (Matlab functions to read binary data from file.)
  • Model:Princeton Ocean Model (POM)  + (Matlab package and other Fortran routines)
  • Model:TopoFlow-Channels-Diffusive Wave  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Channels-Dynamic Wave  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Channels-Kinematic Wave  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Diversions  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Infiltration-Green-Ampt  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Infiltration-Smith-Parlange  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Meteorology  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Snowmelt-Degree-Day  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Snowmelt-Energy Balance  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Saturated Zone-Darcy Layers  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Evaporation-Energy Balance  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Evaporation-Priestley Taylor  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:TopoFlow-Infiltration-Richards 1D  + (None, except visualization software. Grid sequences saved in netCDF files can be viewed as animations and saved as movies using VisIt.)
  • Model:ParFlow  + (ParFlow comes with a robust, integrated toolkit (pftools) that provides a wide range of postprocessing options.)
  • Model:MARSSIM  + (Photoshop to produce movies. Conversions to a variety of data formats.)
  • Model:The TELEMAC system  + (Post processors are used for displaying and analyzing the results)
  • Model:CellularFanDelta  + (Post-processing and (pre-processing) is through Matlab scripts.)
  • Model:CEM  + (Post-processing software is sometimes nece … Post-processing software is sometimes necessary: In some instances (if not just using the JPEGs generated by the model code), some post-processing of the results is desired, e.g. to compare the position of the shoreline between two different times. The model code comes with simple tools to perform simple post-processing. The model also outputs the shoreline in an ASCII format and further post-processing may be achieved using tools such as MATLAB.ay be achieved using tools such as MATLAB.)
  • Model:Gospl  + (Python workflows. Outputs are generated as … Python workflows. Outputs are generated as compressed hdf5 files (The HDF Group, 2000-2010) that can be simply visualise as a temporal series in ParaView (Ahrens et al., 2005). In addition, post-processing scripts are also provided to build the output as VTK (Schroeder et al., 2006) or netCDF files (Brown et al., 1993) and to extract some specific information from the results such as erosion deposition thicknesses, stratigraphic records or river sediment load over time. records or river sediment load over time.)
  • Model:DFMFON  + (Python-based codes)
  • Model:Erode  + (RiverTools or a similar program can be used to create animations of the grid sequence.)
  • Model:TopoFlow  + (RiverTools, VisIt or IDL can be used for visualization.)
  • Model:SISV  + (Simply need to load the data into matlb using fread, data loading files and provided)
  • Model:SBM  + (Some visualization software is required to compare model outputs from different times to understand the temporal evolution of sorted bedforms within the domain)
  • Model:TOPMODEL  + (TOPMODEL is integrated in GRASS GIS version 5. TOPSIMPL, another Windows version of the model written by Georges-Marie Saulnier can be downloaded directly from the main TOPMODEL site)
  • Model:Spbgc  + (The data is written out to binary files. I have a file called dataconv that converts the binary files to a format readable by the visualization software paraview. I also often use MATLAB to do post-processing on the data in the binary files.)
  • Model:WBM-WTM  + (The model is integrated into the in-house developed Global Hydrological Archive and Analysis System (GHAAS), which has a rich set of GIS tools.)
  • Model:Sun fan-delta model  + (The model outputs a series of .mat files t … The model outputs a series of .mat files that contain the full output of the state fields of the model (e.g., elevation, water discharge). These files are convertible to netCDF file with coordinates for use with DeltaMetrics (https://github.com/DeltaRCM/DeltaMetrics).https://github.com/DeltaRCM/DeltaMetrics).)
  • Model:GIPL  + (To generate netcdf or GIS outputs one can write its own converter for that.)
  • Model:FluidMud  + (Typical Matlab or Excell plotting)
  • Model:Kudryavtsev Model  + (Visualization of NetCDF files)
  • Model:WRF  + (WRF post-processing utilities: NCL, Vis5D, GrADS, RIP4, ARWpost, WPP, VAPOR (See: http://www.mmm.ucar.edu/wrf/users/docs/user_guide_V3/users_guide_chap2.htm))
  • Model:CarboCAT  + (Yes, Matlab routines)
  • Model:ROMS  + (Yes, ROMS I/O is via NetCDF and follows CF-standard conventions. Therefore, any visualization software for NetCDF files can be used for pre- and post-processing.)
  • Model:ChesROMS  + (Yes, ROMS I/O is via NetCDF and follows CF-standard conventions. Therefore, any visualization software for NetCDF files can be used for pre- and post-processing.)
  • Model:CBOFS2  + (Yes, ROMS I/O is via NetCDF and follows CF-standard conventions. Therefore, any visualization software for NetCDF files can be used for pre- and post-processing.)
  • Model:UMCESroms  + (Yes, ROMS I/O is via NetCDF and follows CF-standard conventions. Therefore, any visualization software for NetCDF files can be used for pre- and post-processing.)
  • Model:Gvg3Dp  + (Yes, a C code is developed for this gvg3Dp in order to convert the raw binary data into the xml-vtr format which can be read using paraview software.)
  • Model:RCPWAVE  + (Yes, pre- and post-processing, and visualiztion tools provided in software package)
  • Model:VIC  + (http://www.hydro.washington.edu/Lettenmaier/Models/VIC/Documentation/PostProcessing.shtml)
  • Model:BOM  + (model supports a variety of output to ascii or binary files that relatively easy can be read into e.g. matlab or python plotting packages. Gnuplot as also been used.)
  • Model:FACET  + (post process : Enable (True) or disable (F … post process : Enable (True) or disable (False). The default is enabled. Post process as True will aggregate floodplain and channel metrics from individual cross sections to the reach-scale. Post process as False will skip this step.</br></br>stream buffer : Define stream width needed for post processing steps. The input is in Meters. The default is set to 60 meters.</br></br>r exe path : Complete path to RScript.exe. The user will need to update the default which is set to C:\Program Files\R\...\bin\RScript.exe. To quickly find the correct file path run the function R.home() in R.</br></br>clean : Enable (True) or disable (False). The default is disabled. Clean as True will delete all intermediate files. Clean as False will save all intermediate files within the folder structure.</br></br>archive : Enable (True) or disable (False). The default is disabled. Archive as True will archive the entire HUC folder as a .zip file.hive the entire HUC folder as a .zip file.)
  • Model:Physprop  + (software that handles sgy files)
  • Model:CASCADE  + (very limited X11 based graphic output)
  • Model:GSSHA  + (yes, The US Dept. of Defense Watershed Modeling system can produce animations of model outputs. Run summary file includes detailed mass balance information. Output time series can be analyzed using spreadsheet or other software.)
Retrieved from "https://csdms.colorado.edu/wiki/Special:SearchByProperty/:Describe-20post-2Dprocessing-20software/See:-20http:-2F-2Fadcirc.org"