Search by property


This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Describe output parameters model" with value "Amount of deflection of the crust as a function of horizontal position". Since there have been only a few results, also nearby values are displayed.

Showing below up to 26 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)


List of results

  • Model:SubsidingFan  + (--)
  • Model:SuspSedDensityStrat  + (--)
  • Model:WPHydResAMBL  + (--)
  • Model:WRF  + (--)
  • Model:QUAL2K  + (--)
  • Model:RHESSys  + (--)
  • Model:DynEarthSol3D  + (--)
  • Model:LaMEM  + (--)
  • Model:Underworld2  + (--)
  • Model:ApsimX  + (--)
  • Model:LavaFlow2D  + (--)
  • Model:FACET  + (1-D Metrics: (channel width, bank height, floodplain width); 2-D Metrics: (floodplain 2D metrics); 2-D HAND Metrics: (channel width and floodplain width))
  • Model:FwDET  + (1. Floodwater depth raster 2. Smoothed (low-pass filter) floodwater depth raster)
  • Model:RASCAL  + (2-dimensional distributions of the following: * Vegetation community (high- or low-flow-resistance) * Depth-averaged flow speed and directional components * Bed shear stress * Soil elevation * Suspended sediment concentration)
  • Model:DeltaSIM  + (2D longitudinal profiles, multiple grainsizes, probabilistic stratigraphic sections.)
  • Model:Princeton Ocean Model (POM)  + (3D fields of temperature, salinity, velocity, turbulent kinetic energy; 2D fields of surface elevation, vertically averaged velocity, stream function.)
  • Model:Dionisos  + (3D grid of the simulated basin (cartesian grid), + properties (depositional bathymetry, lithology, facies, porosity, ...))
  • Model:SimClast  + (3D stratigraphy (age, provenance, grainsize, peat fraction)<br>Morphodynamic maps of grainsize, discharge, sediment erosion and deposition)
  • Model:Cyclopath  + (A 3D cube of model strata coded by water depth of deposition and thickness transported versus thickness deposited in-situ per time step)
  • Model:NEXRAD-extract  + (A plot, and/or the value of the NetCDF file at the designated cell)
  • Model:Erode  + (A sequence of grids that represent DEMs at different times in the evolution. Saved in RTS (RiverTools Sequence) format with RTI file for georeferencing.)
  • Model:ILAMB  + (A web page displaying skill scores for the models and plots (PNG) of the spatial distribution of model outputs versus benchmark data.)
  • Model:SoilInfiltrationGreenAmpt  + (After infiltration occurs, the component returns an updated 'surface_water__depth' field, as well as an updated 'soil_water_infiltration__depth' field that tracks how much water has been infiltrated into the soil column.)
  • Model:Frost Model  + (Air Frost number)
  • Model:LISFLOOD  + (Although the model’s primary output producAlthough the model’s primary output product is channel discharge, all internal rate and state variables (soil moisture, for example) can also be written as output. In addition, all output can be written as grids, or time series at user-defined points or areas. The user has complete control over how output is written, thus minimising any waste of disk space or CPU time.ising any waste of disk space or CPU time.)
  • Model:LITHFLEX2  + (Amount of deflection of the crust as a function of horizontal position)
  • Model:LITHFLEX1  + (Amount of deflection of the crust as a function of horizontal position.)
  • Model:SVELA  + (Amount of the bed shear stress capable of transporting grains)
  • Model:WDUNE  + (Arc ASCII grids of topography and non-erodible basement.)
  • Model:Barrier3D  + (Barrier elevation grid, cross-shore location of ocean and back-barrier shorelines, dune elevations, overwash flux, shoreface flux, shrub cover)
  • Model:GEOMBEST  + (Barrier island morphology and stratigraphy and migration rate. See User's Guide and Moore et al., 2010 for more details.)
  • Model:GEOMBEST++Seagrass  + (Barrier island, marsh, and bay morphology and stratigraphy over time. See User's Guide and Moore et al., 2010 for more details.)
  • Model:CarboLOT  + (Benthic carbonate accumulation; sediment character and thickness; organism stocks and remains; environmental history; 2D-3D map graphics; graphs of stocks and vacant seafloor through time.)
  • Model:CMFT  + (Bottom configuration at each time step.)
  • Model:OceanWaves  + (Bottom wave orbital velocity. Also surface wave conditions if calculated from wind speed.)
  • Model:CREST  + (CREST outputs consist of several variablesCREST outputs consist of several variables, including:</br>*storage depths of the vegetation canopy,</br>*the three soil layers, and two linear reservoirs,</br>*relative change of the six reservoir levels representing actual evapotranspiration from the canopy and soil layers,</br>*overland and interflow excess rain,</br>* overland and interflow runoff.ess rain, * overland and interflow runoff.)
  • Model:Subside  + (CSV file of crustal deflection)
  • Model:Inflow  + (CSV file of final bathymetry and deposit thickness for each grain size contained in the flow)
  • Model:Sakura  + (CSV file of final bathymetry and deposit thickness for each grain size contained in the flow)
  • Model:Hydromad  + (Calibration algorithms, fit statistics.)
  • Model:SINUOUS  + (Centerline and floodplain evolution through time, as well as hydraulic parameters as detailed in the model documentation)
  • Model:AR2-sinuosity  + (Channel centerlines and associated model parameters)
  • Model:River Erosion Model  + (Channel geometry; sediment export)
  • Model:D'Alpaos model  + (Channel network configuration and morphology, marsh platform elevations, erosion and accretion rates, relevant geomorphological features)
  • Model:TreeThrow  + (Characteristics of tree growth (stand biomass, stem count, leaf area, diamter) and characteristics of sediment transport (sediment flux in m4/m/yr, # of tree falls))
  • Model:CarboCAT  + (Chronostrat plots, maps, cross-sections, lithofacies thickness distributions)
  • Model:GFlex  + (Cofactor matrix (*.mtx sparse matrix file; ASCII) Flexural response map (ASCII))
  • Model:Compact  + (Compacted sediment porosity)
  • Model:Mocsy  + (Compute all carbonate system variables)
  • Model:SETTLE  + (Constant terminal settling velocity at STP)
  • Model:ENTRAINH  + (Critical shear stress for entrainment of a noncohesive grain from a mixed size-density bed)