Search by property


This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Describe output parameters model" with value "Graphical Display and surface plot". Since there have been only a few results, also nearby values are displayed.

Showing below up to 26 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)


List of results

  • Model:The TELEMAC system  + (Depend on different modules that are usingDepend on different modules that are using, it can produce hydrodynamics, such as water velocity and depth; vertical density (3D); temperature plumes and salt wedge; water quality; sediment concentration and transport; underground water velocity field; wave parameters;und water velocity field; wave parameters;)
  • Model:Gvg3Dp  + (Depending on the flags indicated in the inDepending on the flags indicated in the input file, typical flow quantities are stored to the file at the given time steps.<br></br>Velocities, Pressure, Concentration (of the particles).<br></br>Depending on the problems, some other quantities could be stored too.e problems, some other quantities could be stored too.)
  • Model:TURBINS  + (Depending on the flags set in the "input.iDepending on the flags set in the "input.inp" file, flow properties such as velocity, pressure, particle concentration(s), particle deposit mass, bottom shear stress, kinetic and potential energy, dissipation rate, suspended particle mass, current front location, and etc are recorded at the given timesteps.d etc are recorded at the given timesteps.)
  • Model:GeoClaw  + (Depth, momentum on adaptive grid at specified output times. Time series at specified gauge locations. Maxima observed over full simulation on specified grid.)
  • Model:HBV  + (Discharge)
  • Model:FuzzyReef  + (Dynamic variables: # water energy # depositional (seafloor) slope Final output: # carbonate productivity rate # depositional facies)
  • Model:BRaKE  + (Elevation and slope arrays as well as optional information about bed cover and shear stress distributions, as well as block size distributions and incision rate records.)
  • Model:Kirwan marsh model  + (Elevation, Biomass, Accretion Rate, Erosion Rate, and other characteristics of every cell in domain. Also outputs spatially averaged statistics.)
  • Model:GOLEM  + (Elevation, drainage area, and related gridded information.)
  • Model:LOADEST  + (Estimated constituent loads)
  • Model:SBEACH  + (Estimated post-storm beach profile, cross-shore profile of: maximum wave height; maximum water elevation plus setup; volume change)
  • Model:Detrital Thermochron  + (Estimates of the erosional history and spatial patterns and model diagnostic plots.)
  • Model:Rescal-snow  + (Evolving 3D cellspace and 2D elevation map)
  • Model:SICOPOLIS  + (Extent and thickness of the ice sheet, Velocity field, Temperature field, Water content field (temperate regions), Age of the ice, Isostatic displacement and temperature of the lithosphere.)
  • Model:BarrierBMFT  + (Extent, and elevation, and cross-shore boundary locations of barrier, marsh (back-barrier and mainland), bay, and forest ecosystems; organic and mineral deposition; shoreline locations; dune elevations; overwash & shoreface fluxes)
  • Model:Non Local Means Filtering  + (Filtered DEM: A new, filtered DEM in *.flt binary format. Noise: A *.flt binary format grid of the filtered noise.)
  • Model:GSSHA  + (Flow rates, depths, soil moisture, sediment fluxes, erosion/deposition, contaminant/nutrient fluxes and concentrations, groundwater levels, reservoir storages.)
  • Model:LOGDIST  + (Flow velocities at N levels in the vertical, assuming a logarithmic velocity profile)
  • Model:WASH123D  + (Fluid velocity, pressure, temperature, salFluid velocity, pressure, temperature, salinity, concentrations, thermal flexes, and matrial fluxes at all nodes at any desired time. volumetric, energy, and mass balance at all types of boundaries and the entire boundary at any specified time. Br>For details refer to Yeh et al., 2005 Technical Report on WASH123DYeh et al., 2005 Technical Report on WASH123D)
  • Model:RivMAP  + (For a single image: centerlines, widths, cFor a single image: centerlines, widths, channel direction, curvatures</br>For multiple images: (centerline) migration areas, erosion and accretion areas, cutoffs, cutoff statistics, channel belt boundaries, grid generation to map spatial changes, spacetime maps of changes in planform variablestime maps of changes in planform variables)
  • Model:GPM  + (Free-surface flow and wave action through time. Erosion and deposition through time. Optionally, compaction, including porosity reduction.)
  • Model:WAVEWATCH III ^TM  + (From wave heights to spectral data, see manual)
  • Model:TURB  + (Gaussian distribution of instantaneous turbulent fluid shear stresses at the bed)
  • Model:LateralVerticalIncision  + (Geometry of river entrenchment thought time)
  • Model:Gc2d  + (Glacier thickness and elevation)
  • Model:WSGFAM  + (Gravity flow velocity, Depth-integrated sediment load, down-slope sediment flux, flux convergence or divergence, erosion or deposition rate.)
  • Model:Plume  + (Grid of Sediment rate in m/day for specified grain size classes)
  • Model:AquaTellUs  + (Grid of deposition of different grains over time. The model generates postscript files of stratigraphic sections.)
  • Model:Landlab  + (Gridding component provides ASCII and/or netCDF output of grid geometry.)
  • Model:Sun fan-delta model  + (Grids of topography)
  • Model:DeltaRCM Vegetation  + (Grids of water surface elevation, discharge, bed elevation, and vegetation density values for each cell. Additionally, sand fraction of each vertical cell within a grid cell.)
  • Model:CASCADE  + (H, fluxes, discharge, catchment geom, etc, at all time steps, as welle as grid connectivity)
  • Model:HSPF  + (HSPF produces a time history of the runoffHSPF produces a time history of the runoff flow rate, sediment load, and</br>nutrient and pesticide concentrations, along with a time history of water</br>quantity and quality at any point in a watershed. Simulation results can be</br>processed through a frequency and duration analysis routine that produces</br>output compatible with conventional toxicological measures (e.g., 96-hour</br>LC50).xicological measures (e.g., 96-hour LC50).)
  • Model:HexWatershed  + (Hexagon DEM, flow direction, flow accumulation, stream grid, stream segment, stream order, stream confluence, subbasin, watershed boundary, etc.)
  • Model:TauDEM  + (Hydrologic information derived from DEM)
  • Model:GSFLOW-GRASS  + (Hydrologic model discretization, input files for GSFLOW, output files from GSFLOW (hydrologic model))
  • Model:SWMM  + (In addition to modeling the generation andIn addition to modeling the generation and transport of runoff flows, SWMM can also estimate the production of pollutant loads associated with this runoff. The following processes can be modeled for any number of user-defined water quality constituents:</br></br>* dry-weather pollutant buildup over different land uses</br>* pollutant washoff from specific land uses during storm events</br>* direct contribution of rainfall deposition</br>* reduction in dry-weather buildup due to street cleaning</br>* reduction in washoff load due to BMPs</br>* entry of dry weather sanitary flows and user-specified external inflows at any point in the drainage system</br>* routing of water quality constituents through the drainage system</br>* reduction in constituent concentration through treatment in storage units or by natural processes in pipes and channelsby natural processes in pipes and channels)
  • Model:Spbgc  + (It can output local velocity, vorticity, cIt can output local velocity, vorticity, concentration, stream-function, and all derivatives of velocity necessary to calculate dissipation, viscous momentum diffusion, kinetic energy flux, work by pressure forces, and change in kinetic energy. These quantities are written out in a binary file.</br></br> It also has routines for calculating the local height profile and tip position of gravity currents and internal bores, which are outputted every time step and stored as ASCII txt files.y time step and stored as ASCII txt files.)
  • Model:Cross Shore Sediment Flux  + (It outputs all the variables used in the advection-diffusion equation describing bed evolution for both shallow water wave assumptions (all labeled as *_s) and linear theory (labeled as *_lh).)
  • Model:Ecopath with Ecosim  + (Key indices, Mortalities, Consumption, Respiration, Niche overlap, Electivity, Search rates and Fishery forms.)
  • Model:SLAMM 6.7  + (Land cover and elevation prediction rasters under SLR conditions through 2100.)
  • Model:GRLP  + (Long profile (x, z); output sediment discharge)
  • Model:FluidMud  + (Major quantities: mud floc concentration, flow velocity in longshelf and cross-shelf direction. Other quantities: TKE, turbulent dissipation rate, floc size (if floc dynamics turn on), bottom stress.)
  • Model:DFMFON  + (Mangrove properties and Delft3D-FM output)
  • Model:ParFlow  + (Many: pressure, saturation, temperature, energy fluxes, flow, etc.)
  • Model:QDSSM  + (Maps of geomorphology, discharge, deposition, isopachs, stratigraphic thickness, grain size, contour, subsidence, and environment)
  • Model:GEOMBEST++  + (Marsh boundary - gives the position of the backbarrier marsh edge through time Shorelines - gives the position of the barrier shoreline through time step number - saves the surface morphology and stratigraphy for the model at each time step)
  • Model:Wetland3P  + (Marsh depth, mudflat depth, mudflat width)
  • Model:MarshPondModel  + (Marsh elevation Pond area and location)
  • Model:CosmoLand  + (Mass, atoms, landslide size, fluvial residence time, mixed mass and atoms fraction)