Property:Describe output parameters model
From CSDMS
This is a property of type Text.
O
A
See: (http://adcirc.org)
*Screen Output (fort.6)
* General Diagnostic Output (fort.16)
* Iterative Solver ITPACKV 2D Diagnostic Output (fort.33)
* 3D Density, Temperature and/or Salinity at Specified Recording Stations (fort.41)
* 3D Velocity at Specified Recording Stations (fort.42)
* 3D Turbulence at Specified Recording Stations (fort.43)
* 3D Density, Temperature and/or Salinity at All Nodes in the Model Grid (fort.44)
* 3D Velocity at All Nodes in the Model Grid (fort.45)
* 3D Turbulence at All Nodes in the Model Grid (fort.46)
* Elevation Harmonic Constituents at Specified Elevation Recording Stations (fort.51)
* Depth-averaged Velocity Harmonic Constituents at Specified Velocity Recording Stations (fort.52)
* Elevation Harmonic Constituents at All Nodes in the Model Grid (fort.53)
* Depth-averaged Velocity Harmonic Constituents at All Nodes in the Model Grid (fort.54)
* Harmonic Constituent Diagnostic Output (fort.55)
* Elevation Time Series at Specified Elevation Recording Stations (fort.61)
* Depth-averaged Velocity Time Series at Specified Velocity Recording Stations (fort.62)
* Elevation Time Series at All Nodes in the Model Grid (fort.63)
* Depth-averaged Velocity Time Series at All Nodes in the Model Grid (fort.64)
* Hot Start Output (fort.67, fort.68)
* Atmospheric Pressure Time Series at Specified Meteorological Recording Stations (fort.71)
* Wind Velocity Time Series at Specified Meteorological Recording Stations (fort.72)
* Atmospheric Pressure Time Series at All Nodes in the Model Grid (fort.73)
* Wind Stress or Velocity Time Series at All Nodes in the Model Grid (fort.74)
* Depth-averaged Scalar Concentration Time Series at Specified Concentration Recording Stations (fort.81)
* Depth-averaged Scalar Concentration Time Series at All Nodes in the Model Grid (fort.83)
* Depth-averaged Density Fields at Specified Recording Stations (fort.91)
* Depth-averaged Density Fields at All Nodes in the Model Grid (fort.93) +
S
Selected Wave Spectra
Selected Wave Parameters
Wave Parameter Fields
Breaker Index Fields
Radiation Stress Gradient Fields +
P
Several state variables (soil moisture, groundwater table, stream head, interception, surface state and snow depth) and fluxes (3 components of evapotranspiration) 10 stream component fluxes for each reach, infiltration, recharge, lateral flux) +
Q
Shoreline and alluvial-bedrock transition trajectories over time.
Future versions of the model will include the profile evolution. +
G
B
Simple ascii files containing x and z coordinates of points at end of run. Optional output of figure in .eps format. +
U
S
Snowpack creates various output files:
* the current state of its soil and snow layers in ".sno" files;
* the current state of its hazard relevant data in ".haz" files;
* a time serie of snow profiles;
* a time serie of the meteorological data and fluxes as used in the model. +
O
W
Storm, monthly, yearly, or average annual runoff, soil loss, and sediment yield from a hillslope profile. Spatial distribution of soil erosion and deposition on slope profiles. Graphical output available of 92 parameters from continuous model simulations (including precip, temperatures, runoff, soil loss, sediment yield, biomass production, residue cover, etc.). Soil output text file, water balance output text file, plant output text file, storm event output file, overland flow element summary line output file. +
G
L
O
The Landlab OverlandFlow component outputs data as Landlab fields - numpy arrays containing data with the associated CSDMS standard name, listed below:
'surface_water__depth' : NumPy array of length nnodes. Water depths at a given time step.
'surface_water__discharge' : NumPy array of length nlinks. Water discharge values at a given time step.
'water_surface__gradient' : NumPy array of length nlinks. Water surface gradient at a given time step. +
P
The PBS wraps ILAMB, which produces tabular and graphical statistics from a benchmark analysis. These outputs can be viewed in ILAMB, or downloaded to a user's local machine as a tarball. +
W
The WBMplus model can output any variables used for the water balance and transport calculations. WBMsed unique output are: sediment-flux, over-bank water discharge, and all the BQART parameters. +
S
The code outputs the following text files:
“topoout.txt” – elevation for each grid point at the end of the simulation
“depth.txt” – flow depth at each grid point at the end of the simulation
“uh.txt” – value of conserved variable UH at each grid point
“vh.txt” – value of conserved variable VH at each grid point
“ch.txt” – value of conserved variable CH at each grid point
“m.txt” – mass of sediment in the deposited layer at each grid point
“c.txt” – sediment concentration at each grid point
“vel.txt” – flow velocity at each grid point
“stage.txt” – time series data (time (s), flow depth, flow velocity, and sediment concentration) at the outlet pixel
“maxvel.txt” – maximum flow velocity recorded at each grid point throughout the simulation
“maxdepth.txt” -- maximum flow depth recorded at each grid point throughout the simulation
“saveflow.txt” – time series data (flow depth, flow velocity, sediment concentration) at user specified grid points
“topomovie.txt” – elevation data at different times throughout the simulation (specified in the code by “printinterval”)
“depthmovie.txt” – flow depth at different times throughout the simulation
“velocitymovie.txt” – flow velocity at different times throughout the simulation
“cmovie.txt” – sediment concentration at different times throughout the simulation
“Mmovie.txt” – mass of sediment in the deposited layer at different times throughout the simulation +
C
The component provides monthly temperature data in degrees Celcius. Within the CSDMS framework, the component generates an NetCDF file of a stacked grid of monthly temperatures over the specified region. +
D
The computed outflow from any flow plane, pipe, or channel segment for each storm period may be written to the output file or to the WDM file. A summary of the measured and simulated rainfall, runoff, and peak flows is written to the output file. A flat file containing the storm rainfall, measured flow (if available), and simulated flow at user selected sites can be generated. A flat file for each storm containing the total rainfall, the measured peak flow (if available), and the simulated peak flow for user-selected sites can be generated. +
C
The data component provides monthly temperature as a NetCDF file for the region of Alaska +
W
The following output files are available to the user, depending on their run configuration:
1. Land surface model output
2. Land surface diagnostic output
3. Streamflow output at all channel reaches/cells
4. Streamflow output at forecast points or gage reaches/cells
5. Streamflow on the 2D high resolution routing grid (gridded channel routing only)
6. Terrain routing variables on the 2D high resolution routing grid
7. Lake output variables
8. Ground water output variables
9. A text file of streamflow output at either forecast points or gage locations
For a detailed table of each variable
contained within each output file, see the WRF-Hydro Output Variable Matrix V5 located on our website
https://ral.ucar.edu/projects/wrf_hydro/technical-description-user-guide +
1
The model can be customized to produce many different kinds of output but, typically, the output consists of (i) h, a final hillslope profile; (ii) h_diffs, a vector which summarizes how the profile changed over the duration of the simulation; and (iii) a vector expressing the fluxes of particles through a site along the hillslope.
However, the same code can be used to produce a video of the hillslope evolution, a vector containing the absolute difference between the hillslope profile and a reference profile, and many other observables of interest. +
W
The model can output any variables used for the water balance and transport calculations. The most frequently requested ones are: potential and actual evapotranspiration, soil moisture, groundwater storage, river discharge, irrigational water uptake. +
P
The model generates several georeferenced tiff files upon completion. These geotiff files can be viewed using any GIS software. Each file is a 2D map of a modeled flow property such as thickness, velocity etc. Additionally, multiband geotiff files containing similar 2D maps at multiple user-defined time intervals during the simulation.
Depth – Map of the final 2D flow thickness (in meters).
Depthbin – Binary map where cells with thickness > user-defined threshold thickness have a value of 1 and the rest of the cells have a value of 0.
MaxDepth – Map of the maximum flow depth obtained at each cell during the entire simulation (in meters).
MaxVelocity – Map of the maximum velocity obtained at each cell during the entire simulation (in m/s).
MomentumX – Map of final 2D flow momentum along the X direction (in sq. m/s).
MomentumY – Map of final 2D flow momentum along the Y direction (in sq. m/s).
Velocity – Map of the final 2D flow velocity (in m/s).
VelocityX – Map of the final 2D flow velocity along the X direction (in m/s).
VelocityY – Map of the final 2D flow velocity along the Y direction (in m/s).
The multiband (movie) files output by the model are DepthMovie, MomentumXMovie, MomentumYMovie, VelocityMovie, VelocityXMovie, VelocityYMovie. +
S
The new coastline at the end of the simulation is plotted. Results are not currently saved to files. +
R
G
The output are elevation values that represent the gully channel profile. +
L
The output can ultimately be used to plot and view the particles and compare the
outcomes of different model runs. There are two types of comma-delimited output files: para
and endfile. The para files are created periodically at set intervals throughout the running of the
program and contain the particle locations at the current time. The endfile file is created only at
the end of the program and contains information regarding each particles’ start location, end
location, and ending status. +
H
The output data is both plain text data files and .flt raster files containing the spatial location of the computed results. +
C
The output of the model consists of snapshots of the coastline during its evolution. The model can be configured to write the resulting coastline at any point during the simulation. The output format of the coastline file is a custom binary formatted-file (the same format as the initial model input). Also, for convenience using with other software tools such as MATLAB, an ASCII-based file of the coastline shape can be written too. The model can also directly generate JPEG-formatted pictures of the coastline shape at any time during the simulation. +
The outputs are
i) For chi_m_over_n_analysis.exe, a *.movern file that contains information about the goodness of fit of channel profiles to a series of linear segments as a function of the m/n ratio: this file is used to determine the best fit m/n ratio of a channel network.
ii) For chi_get_profiles.exe, a series of *.tree files which contain information about the best fit channel segments in chi-elevation space. This data can be used to infer erosion rates, tectonics, or variations in erodibility. +
H
The outputs of HydroCNHS are stored in a data collector object, an attribute of HydroCNHS (e.g., model.dc). The main output is the daily streamflow at routing outlets. However, this data collector object will also contain other user-specified agent outputs as long as users use this data collector object in their ABM modules. +
C
The state of the system is periodically output to a binary file that can be read by the post-processing and visualization routines (see the CVPM modeling system user's guide). +
S
The windfield for a cyclone based on pressure distribution and radius to maximum winds (SI units). +
D
There are a number of different types of output that the model can produce. In short, the following possibilities are available:
DHSVM hydrologic output
* Default output (these files are always produced)
* Model state files
* Network flow files
* Travel time based hydrograph file
* Optional output files
Sediment Module output
* Default output (these files are always produced)
* Network flow files
* Optional output files +
R
There are hundreds of output parameters and fields that are written to several NetCDF files. +
C
There are hundreds of output parameters and fields that are written to several NetCDF files. +
There are hundreds of output parameters and fields that are written to several NetCDF files. +
U
There are hundreds of output parameters and fields that are written to several NetCDF files. +
T
This component computes the following variables, as grids:
Q = discharge (m^3/s)
u = flow velocity (m/s)
d = flow depth (m)
f = friction factor (none)
Rh = hydraulic radius (m)
S_free = free-surface slope (m/m)
The user can choose which, if any, of these to save. Each may be saved as a grid sequence, indexed by time, in a netCDF file, at a specified sampling rate. Each may also be saved for a set of "monitored" grid cells, each specified as a (row,column) pair in a file with the name: <case_prefix>_outlets.txt. With this option, computed values are saved in a multi-column text file at a specified sampling rate. Each column in this file corresponds to a time series of values for a particular grid cell. For both options the sampling rate must no smaller than the process timestep. +
This component computes the following variables, as grids:
Q = discharge (m^3/s)
u = flow velocity (m/s)
d = flow depth (m)
f = friction factor (none)
Rh = hydraulic radius (m)
S_free = free-surface slope (m/m)
The user can choose which, if any, of these to save. Each may be saved as a grid sequence, indexed by time, in a netCDF file, at a specified sampling rate. Each may also be saved for a set of "monitored" grid cells, each specified as a (row,column) pair in a file with the name: <case_prefix>_outlets.txt. With this option, computed values are saved in a multi-column text file at a specified sampling rate. Each column in this file corresponds to a time series of values for a particular grid cell. For both options the sampling rate must no smaller than the process timestep. +
This component computes the following variables, as grids:
Q = discharge (m^3/s)
u = flow velocity (m/s)
d = flow depth (m)
f = friction factor (none)
Rh = hydraulic radius (m)
S_free = free-surface slope (m/m)
The user can choose which, if any, of these to save. Each may be saved as a grid sequence, indexed by time, in a netCDF file, at a specified sampling rate. Each may also be saved for a set of "monitored" grid cells, each specified as a (row,column) pair in a file with the name: <case_prefix>_outlets.txt. With this option, computed values are saved in a multi-column text file at a specified sampling rate. Each column in this file corresponds to a time series of values for a particular grid cell. For both options the sampling rate must no smaller than the process timestep. +
C
Time series of 2D topography/bathymetry and water discharge. 3D stratigraphy grid
(currently model is single grain-size, so stratigraphy only stores deposit age) +
D
T
Time variation of longitudinal profile, sediment flux and grain size distributions of bedload, surface and subsurface sediment. +
B
Timeseries of:
Overwash fluxes (m3/m/s)
Inlet fluxes (m3/m/s)
Shoreface toe location (m)
Shoreline location (m)
Back-barrier location (m)
Barrier Height (m)
Inlet locations alongshore (m) +
P
To many to list here, see ''Description of Input and Examples for PHREEQC Version 3 - A computer program for speciation, batch-reaction, one-dimensional transport, and inverse geochemical calculations'. +
Toggle on/off in input file:
- PNG files of eta, stage, depth
- grids of eta, stage, depth (as netCDF4)
- grids of sand fraction in stratigraphy (as netCDF4) +
T
