Search by property

From CSDMS

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Describe output parameters model" with value "Time series of 2D/3D map data and selected point data, particle tracks". Since there have been only a few results, also nearby values are displayed.

Showing below up to 26 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)


    

List of results

  • Model:DR3M  + (The computed outflow from any flow plane, The computed outflow from any flow plane, pipe, or channel segment for each storm period may be written to the output file or to the WDM file. A summary of the measured and simulated rainfall, runoff, and peak flows is written to the output file. A flat file containing the storm rainfall, measured flow (if available), and simulated flow at user selected sites can be generated. A flat file for each storm containing the total rainfall, the measured peak flow (if available), and the simulated peak flow for user-selected sites can be generated. for user-selected sites can be generated.)
  • Model:CruAKTemp  + (The data component provides monthly temperature as a NetCDF file for the region of Alaska)
  • Model:WRF-Hydro  + (The following output files are available tThe following output files are available to the user, depending on their run configuration:</br>1. Land surface model output</br>2. Land surface diagnostic output</br>3. Streamflow output at all channel reaches/cells</br>4. Streamflow output at forecast points or gage reaches/cells</br>5. Streamflow on the 2D high resolution routing grid (gridded channel routing only)</br>6. Terrain routing variables on the 2D high resolution routing grid</br>7. Lake output variables</br>8. Ground water output variables</br>9. A text file of streamflow output at either forecast points or gage locations</br>For a detailed table of each variable</br>contained within each output file, see the WRF-Hydro Output Variable Matrix V5 located on our website</br>https://ral.ucar.edu/projects/wrf_hydro/technical-description-user-guidewrf_hydro/technical-description-user-guide)
  • Model:1D Particle-Based Hillslope Evolution Model  + (The model can be customized to produce manThe model can be customized to produce many different kinds of output but, typically, the output consists of (i) h, a final hillslope profile; (ii) h_diffs, a vector which summarizes how the profile changed over the duration of the simulation; and (iii) a vector expressing the fluxes of particles through a site along the hillslope.</br></br>However, the same code can be used to produce a video of the hillslope evolution, a vector containing the absolute difference between the hillslope profile and a reference profile, and many other observables of interest.e, and many other observables of interest.)
  • Model:WBM-WTM  + (The model can output any variables used for the water balance and transport calculations. The most frequently requested ones are: potential and actual evapotranspiration, soil moisture, groundwater storage, river discharge, irrigational water uptake.)
  • Model:PyDeCe  + (The model generates several georeferenced The model generates several georeferenced tiff files upon completion. These geotiff files can be viewed using any GIS software. Each file is a 2D map of a modeled flow property such as thickness, velocity etc. Additionally, multiband geotiff files containing similar 2D maps at multiple user-defined time intervals during the simulation.</br></br>Depth – Map of the final 2D flow thickness (in meters).</br></br>Depthbin – Binary map where cells with thickness > user-defined threshold thickness have a value of 1 and the rest of the cells have a value of 0.</br></br>MaxDepth – Map of the maximum flow depth obtained at each cell during the entire simulation (in meters).</br></br>MaxVelocity – Map of the maximum velocity obtained at each cell during the entire simulation (in m/s).</br></br>MomentumX – Map of final 2D flow momentum along the X direction (in sq. m/s).</br></br>MomentumY – Map of final 2D flow momentum along the Y direction (in sq. m/s).</br></br>Velocity – Map of the final 2D flow velocity (in m/s).</br></br>VelocityX – Map of the final 2D flow velocity along the X direction (in m/s).</br></br>VelocityY – Map of the final 2D flow velocity along the Y direction (in m/s).</br></br></br>The multiband (movie) files output by the model are DepthMovie, MomentumXMovie, MomentumYMovie, VelocityMovie, VelocityXMovie, VelocityYMovie.elocityMovie, VelocityXMovie, VelocityYMovie.)
  • Model:Shoreline  + (The new coastline at the end of the simulation is plotted. Results are not currently saved to files.)
  • Model:Reservoir  + (The no-fail storage capacity and corresponding storage behaviour time series.)
  • Model:GullyErosionProfiler1D  + (The output are elevation values that represent the gully channel profile.)
  • Model:LTRANS  + (The output can ultimately be used to plot The output can ultimately be used to plot and view the particles and compare the</br>outcomes of different model runs. There are two types of comma-delimited output files: para</br>and endfile. The para files are created periodically at set intervals throughout the running of the</br>program and contain the particle locations at the current time. The endfile file is created only at</br>the end of the program and contains information regarding each particles’ start location, end</br>location, and ending status.location, end location, and ending status.)
  • Model:Hilltop flow routing  + (The output data is both plain text data files and .flt raster files containing the spatial location of the computed results.)
  • Model:CEM  + (The output of the model consists of snapshThe output of the model consists of snapshots of the coastline during its evolution. The model can be configured to write the resulting coastline at any point during the simulation. The output format of the coastline file is a custom binary formatted-file (the same format as the initial model input). Also, for convenience using with other software tools such as MATLAB, an ASCII-based file of the coastline shape can be written too. The model can also directly generate JPEG-formatted pictures of the coastline shape at any time during the simulation.e shape at any time during the simulation.)
  • Model:Chi analysis tools  + (The outputs are i) For chi_m_over_n_analysThe outputs are</br>i) For chi_m_over_n_analysis.exe, a *.movern file that contains information about the goodness of fit of channel profiles to a series of linear segments as a function of the m/n ratio: this file is used to determine the best fit m/n ratio of a channel network. </br>ii) For chi_get_profiles.exe, a series of *.tree files which contain information about the best fit channel segments in chi-elevation space. This data can be used to infer erosion rates, tectonics, or variations in erodibility., tectonics, or variations in erodibility.)
  • Model:HydroCNHS  + (The outputs of HydroCNHS are stored in a dThe outputs of HydroCNHS are stored in a data collector object, an attribute of HydroCNHS (e.g., model.dc). The main output is the daily streamflow at routing outlets. However, this data collector object will also contain other user-specified agent outputs as long as users use this data collector object in their ABM modules.ata collector object in their ABM modules.)
  • Model:CVPM  + (The state of the system is periodically output to a binary file that can be read by the post-processing and visualization routines (see the CVPM modeling system user's guide).)
  • Model:STORM  + (The windfield for a cyclone based on pressure distribution and radius to maximum winds (SI units).)
  • Model:DHSVM  + (There are a number of different types of oThere are a number of different types of output that the model can produce. In short, the following possibilities are available:</br></br>DHSVM hydrologic output</br>* Default output (these files are always produced)</br>* Model state files</br>* Network flow files</br>* Travel time based hydrograph file</br>* Optional output files</br></br>Sediment Module output</br>* Default output (these files are always produced)</br>* Network flow files</br>* Optional output filesNetwork flow files * Optional output files)
  • Model:ROMS  + (There are hundreds of output parameters and fields that are written to several NetCDF files.)
  • Model:ChesROMS  + (There are hundreds of output parameters and fields that are written to several NetCDF files.)
  • Model:CBOFS2  + (There are hundreds of output parameters and fields that are written to several NetCDF files.)
  • Model:UMCESroms  + (There are hundreds of output parameters and fields that are written to several NetCDF files.)
  • Model:TopoFlow-Channels-Diffusive Wave  + (This component computes the following variThis component computes the following variables, as grids:</br> Q = discharge (m^3/s)</br> u = flow velocity (m/s)</br> d = flow depth (m)</br> f = friction factor (none)</br> Rh = hydraulic radius (m)</br> S_free = free-surface slope (m/m)</br>The user can choose which, if any, of these to save. Each may be saved as a grid sequence, indexed by time, in a netCDF file, at a specified sampling rate. Each may also be saved for a set of "monitored" grid cells, each specified as a (row,column) pair in a file with the name: <case_prefix>_outlets.txt. With this option, computed values are saved in a multi-column text file at a specified sampling rate. Each column in this file corresponds to a time series of values for a particular grid cell. For both options the sampling rate must no smaller than the process timestep. rate must no smaller than the process timestep.)
  • Model:TopoFlow-Channels-Dynamic Wave  + (This component computes the following variThis component computes the following variables, as grids:</br> Q = discharge (m^3/s)</br> u = flow velocity (m/s)</br> d = flow depth (m)</br> f = friction factor (none)</br> Rh = hydraulic radius (m)</br> S_free = free-surface slope (m/m)</br>The user can choose which, if any, of these to save. Each may be saved as a grid sequence, indexed by time, in a netCDF file, at a specified sampling rate. Each may also be saved for a set of "monitored" grid cells, each specified as a (row,column) pair in a file with the name: <case_prefix>_outlets.txt. With this option, computed values are saved in a multi-column text file at a specified sampling rate. Each column in this file corresponds to a time series of values for a particular grid cell. For both options the sampling rate must no smaller than the process timestep. rate must no smaller than the process timestep.)
  • Model:TopoFlow-Channels-Kinematic Wave  + (This component computes the following variThis component computes the following variables, as grids:</br> Q = discharge (m^3/s)</br> u = flow velocity (m/s)</br> d = flow depth (m)</br> f = friction factor (none)</br> Rh = hydraulic radius (m)</br> S_free = free-surface slope (m/m)</br>The user can choose which, if any, of these to save. Each may be saved as a grid sequence, indexed by time, in a netCDF file, at a specified sampling rate. Each may also be saved for a set of "monitored" grid cells, each specified as a (row,column) pair in a file with the name: <case_prefix>_outlets.txt. With this option, computed values are saved in a multi-column text file at a specified sampling rate. Each column in this file corresponds to a time series of values for a particular grid cell. For both options the sampling rate must no smaller than the process timestep. rate must no smaller than the process timestep.)
  • Model:CellularFanDelta  + (Time series of 2D topography/bathymetry and water discharge. 3D stratigraphy grid (currently model is single grain-size, so stratigraphy only stores deposit age))
  • Model:Delft3D  + (Time series of 2D/3D map data and selected point data, particle tracks)
  • Model:TUGS  + (Time variation of longitudinal profile, sediment flux and grain size distributions of bedload, surface and subsurface sediment.)
  • Model:Barrier Inlet Environment (BRIE) Model  + (Timeseries of: Overwash fluxes (m3/m/s) Inlet fluxes (m3/m/s) Shoreface toe location (m) Shoreline location (m) Back-barrier location (m) Barrier Height (m) Inlet locations alongshore (m))
  • Model:PHREEQC  + (To many to list here, see ''Description of Input and Examples for PHREEQC Version 3 - A computer program for speciation, batch-reaction, one-dimensional transport, and inverse geochemical calculations'.)
  • Model:PyDeltaRCM  + (Toggle on/off in input file: - PNG files of eta, stage, depth - grids of eta, stage, depth (as netCDF4) - grids of sand fraction in stratigraphy (as netCDF4))
  • Model:TopoFlow  + (Too many to list here. Please see the HTML help system and the wiki pages for all of the process components.)
  • Model:MODFLOW  + (Too many to mention here, see: http://water.usgs.gov/nrp/gwsoftware/modflow2000/modflow2000.html)
  • Model:YANGs  + (Total load mass flux)
  • Model:Area-Slope Equation Calculator  + (Two output maps ESRI ASCII format: # Alpha (coefficient); # Constant.)
  • Model:SISV  + (Typical flow quantities: Velocities, Concentrations, Vorticity, Passive marker location)
  • Model:OlaFlow  + (VOF, U, turbulence variables...)
  • Model:Pllcart3d  + (Velocities and concentration fields of the particles are stored to binary files at given time steps.)
  • Model:DELTA  + (Vertically-integrated flow velocities and bed elevations as functions of time and two horizontal dimensions)
  • Model:2DFLOWVEL  + (Vertically-integrated flow velocities and water surface elevations as functions of time and two horizontal dimensions)
  • Model:WOFOST  + (WOFOST simulates the growth of a specific WOFOST simulates the growth of a specific crop and its interaction with the soil. Its main output variables consist of crop variables (like total biomass, yield, phenological development and leaf area index) and soil variables like soil water content. More recent versions of WOFOST also include the N/P/K amounts in the crop organs and soil.N/P/K amounts in the crop organs and soil.)
  • Model:MCPM  + (Water level Water velocity Bed shear stress Suspended sediment concentration Bed elevation)
  • Model:DepthDependentTaylorDiffuser  + (_info = { "bedrock__elevation": { _info = {</br> "bedrock__elevation": {</br> "dtype": float,</br> "intent": "out",</br> "optional": False,</br> "units": "m",</br> "mapping": "node",</br> "doc": "elevation of the bedrock surface",</br> },</br> "soil__depth": {</br> "dtype": float,</br> "intent": "inout",</br> "optional": False,</br> "units": "m",</br> "mapping": "node",</br> "doc": "Depth of soil or weathered bedrock",</br> },</br> "soil__flux": {</br> "dtype": float,</br> "intent": "out",</br> "optional": False,</br> "units": "m^2/yr",</br> "mapping": "link",</br> "doc": "flux of soil in direction of link",</br> },</br> "soil_production__rate": {</br> "dtype": float,</br> "intent": "in",</br> "optional": False,</br> "units": "m/yr",</br> "mapping": "node",</br> "doc": "rate of soil production at nodes",</br> },</br> "topographic__elevation": {</br> "dtype": float,</br> "intent": "inout",</br> "optional": False,</br> "units": "m",</br> "mapping": "node",</br> "doc": "Land surface topographic elevation",</br> },</br> "topographic__slope": {</br> "dtype": float,</br> "intent": "out",</br> "optional": False,</br> "units": "m/m",</br> "mapping": "link",</br> "doc": "gradient of the ground surface",</br> },</br> }t of the ground surface", }, })
  • Model:DetachmentLtdErosion  + (_info = { "surface_water__discharg_info = {</br> "surface_water__discharge": {</br> "dtype": float,</br> "intent": "in",</br> "optional": False,</br> "units": "m**3/s",</br> "mapping": "node",</br> "doc": "Volumetric discharge of surface water",</br> },</br> "topographic__elevation": {</br> "dtype": float,</br> "intent": "inout",</br> "optional": False,</br> "units": "m",</br> "mapping": "node",</br> "doc": "Land surface topographic elevation",</br> },</br> "topographic__slope": {</br> "dtype": float,</br> "intent": "in",</br> "optional": True,</br> "units": "-",</br> "mapping": "node",</br> "doc": "gradient of the ground surface",</br> },</br> }t of the ground surface", }, })
  • Model:SedFoam-2.0  + (alpha: sediment concentration Ua: sediment velocity Ub: fluid velocity p: fluid pressure Theta: granular temperature k: fluid kinetic energy epsilon/omega: fluid turbulent dissipation)
  • Model:Caesar  + (ascii grids (readable into arcGIS) and gooascii grids (readable into arcGIS) and google earth images of: DEM, flow depth, surface grainsize, shear stress, vegetation cover, velocity.</br>Also time series of water discharge and sediment discharge (across 9 grainsizes) at user chosen interval.</br>Also visual output to AVI file. interval. Also visual output to AVI file.)
  • Model:CrevasseFlow  + (averaged daily water discharge to lower reach of crevasse splay; averaged daily crevasse splay depth; averaged daily crevasse splay width)
  • Model:ZoneTaxon  + (boolean: Indicates if the taxon is still boolean: </br>Indicates if the taxon is still evolving. When `False` is returned,</br>this method will not be called for the taxon in subsequent stages in</br>the current model time step.<br></br>list of Taxon: </br>The children produced by the taxon at a given stage. The ``evolve``</br>method of child taxon will be called in stages following the stage</br>the child taxon was produced. An empty list indicates no child</br>taxon.roduced. An empty list indicates no child taxon.)
  • Model:Zscape  + (change in topographic profile with time)
  • Model:Meanderpy  + (channel centerlines; 3d model)
  • Model:DeltaClassification  + (classification of groups of similar zones classification of groups of similar zones within a deltasystem</br>code blocks that:</br></br>• loads in the shapefiles</br>• calculate the parameters for the network that both surround and drain the islands</br>• calculate the base metrics (e.g. perimeter, area, solidity, aspect ratio...)</br>• calculates maximum distance from the island center to the nearest water body</br>• estimates minimum, average and maximum widths of all network channels</br>• evaluates the fractal dimension of each delta island</br>• creates shapefiles based on the metrics calculated earlier in the code</br>• saves all metrics to an output file</br>• generates PCA and GeoSOM results from the island and channel metrics</br>• plots the U-matrix and dendrogram based on the GeoSOM resultsand dendrogram based on the GeoSOM results)
  • Model:GreenAmptInfiltrationModel  + (cumulative infiltration, infiltration rate)