Search by property

From CSDMS

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "Describe input parameters model" with value "Initial elevation (z) grid with cell type (A)". Since there have been only a few results, also nearby values are displayed.

Showing below up to 11 results starting with #1.

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)

    

List of results

  • Model:VIC  + (Global Parameter File user_def.h File Meteorological Forcing Files Soil Parameter File Vegetation Library File Vegetation Parameter File (Optional) Initial State File (Optional) Elevation Band File (Optional) Lake/Wetland Parameter File)
  • Model:SETTLE  + (Grain size and density)
  • Model:GroundwaterDupuitPercolator  + (Gridded elevation, aquifer base elevation. Hydraulic conductivity, porosity, recharge.)
  • Model:Bedrock Fault Scarp  + (HILLSLOPE_LENGTH: length of hillslope, in … HILLSLOPE_LENGTH: length of hillslope, in meters</br>NUMBER_OF_NODES: number of model nodes (initially)</br>EROSION_RATE: slope-normal erosion rate in m/yr</br>THRESHOLD_SLOPE: threshold slope angle (m/m)</br>THROW_RATE: fault throw rate, meters per year</br>FAULT_DIP: fault dip angle, degrees</br>SEISMIC_INTERVAL: Time interval between earthquakes, in years</br>RUN_DURATION: duration of run in years</br>DT: time step duration in years</br>OPT_ERO_VAR: option for time variation in erosion rate</br>AMPLITUDE: amplitude of sinusoidal variation (m/yr)</br>PERIOD: period of sinusoidal variation (yr)</br>PHASE: phase offset for sinusoidal variation (degrees)</br>DEL18O_FILENAME: name of file containing oxygen isotope curve</br>DEL18O_POWER: exponent</br>MIN_ERORATE:</br>OPT_PLOT: option for plotting</br>OPT_EPS_PLOT: option for output to .eps file</br>PLOT_INTERVAL: time interval for plotting, in yearsRVAL: time interval for plotting, in years)
  • Model:Zscape  + (INTEGER NXPROB INTEGER TIMESTEPS double pr … INTEGER NXPROB</br>INTEGER TIMESTEPS</br>double precision DIFFUSION</br>double precision DELX,DELT</br>* PARAMETER (NXPROB=1000), c dimension of problem grid</br>* PARAMETER (TIMESTEPS=50000), c number of time steps</br>* PARAMETER (DIFFUSION=1d-3), c metres/year - a very high diffusion value</br>* PARAMETER (DELX=0.1d0), c grid spacing in metres</br>* PARAMETER (DELT=1d0), c time step in yearsPARAMETER (DELT=1d0), c time step in years)
  • Model:SNAC  + (In XML format, the following groups of par … In XML format, the following groups of parameters are specified:</br></br>simulation control group: total model time, time step, damping, etc.</br>plugins: elasticity, viscoelasticity, temperature solver, etc.</br>domain description group: domain size, element numbers, etc.</br>initial and boundary conditions groupetc. initial and boundary conditions group)
  • Model:CoastMorpho2D  + (Initial bathymetry Boundary conditions Time series of waves, wind, storm surges Various hydrodynamics and sedimentary parameters)
  • Model:SBEACH  + (Initial beach profiles, time series of storm wave heights, periods, and storm water levels)
  • Model:CMFT  + (Initial bottom configuration, wind and tide characteristics, sea level rise rate, water column sediment concentration at the boundary.)
  • Model:Shoreline  + (Initial coastline curve (array of xy pairs), depth of closure, a time series of wind speeds and angles, sediment grainsize, coastal bluff heights, a variety of configuration flags)
  • Model:MARSSIM  + (Initial elevation file. File specifying boundary conditions, run time, process options, and parameter values.)
  • Model:Erode  + (Initial land surface (several built-in opt … Initial land surface (several built-in options), number of timesteps, DEM grid dimensions, DEM grid cell dimensions, R = "geomorphic" rainrate (m/yr), U=uplift rate (mm/yr), BLR = base-level lowering rate (mm/yr), Kf="erodibility coefficient (m^3/yr)^(1-m), m = area/discharge exponent, n = slope exponent, p = area-discharge exponent, toggles for different types of boundary conditions (e.g. periodic), DEM georeferencing info (bounding box, pixel geometry, etc.) info (bounding box, pixel geometry, etc.))
  • Model:GPM  + (Initial topography. Initial subsurface la … Initial topography.</br></br>Initial subsurface layering, if any.</br>Properties of existing rocks/sediments.</br>Sea-level change curve.</br>Sources of flow and sediment, sources of wave action, boundary conditions Externally imposed vertical tectonics as a function of horizontal position and timea function of horizontal position and time)
  • Model:HBV  + (Input data are observations of precipitation, air temperature and estimates of potential evapotranspiration.)
  • Model:AlluvStrat  + (Input file: channel width and depth, a few others)
  • Model:ESCAPE  + (Input files for eSCAPE are based on YAML s … Input files for eSCAPE are based on YAML syntax. </br></br>domain: definition of the unstructured grid containing the vtk grid filename and the associated field (here called Z) as well as the flow direction method to be used flowdir that takes an integer value between 1 (for SFD) and 12 (for Dinf) and the boundary conditions (bc: ‘flat’, ‘fixed’ or ‘slope’)</br>time: the simulation time parameters defined by start, end, tout (the output interval) and dt (the internal time-step).</br>Follows the optional forcing conditions:</br></br>sea: the sea-level declaration with the relative sea-level position (m) and the sea-level curve which is a file containing 2 columns (time and sea-level position).</br>climatic & tectonic have the same structure with a sequence of events defined by a starting time (start) and either a constant value (uniform) or a map.</br>Then the parameters for the surface processes to simulate:</br></br>spl: for the stream power law with a unique parameter Ke representing the The erodibility coefficient which is scale-dependent and its value depend on lithology and mean precipitation rate, channel width, flood frequency, channel hydraulics. It is worth noting that the coefficient m and n are fixed in this version and take the value 0.5 & 1 respectively.</br>diffusion: hillslope, stream and marine diffusion coefficients. hillslopeK sets the simple creep transport law which states that transport rate depends linearly on topographic gradient. River transported sediment trapped in inland depressions or internally draining basins are diffused using the coefficient (streamK). The marine sediment are transported based on a diffusion coefficient oceanK. The parameter maxIT specifies the maximum number of steps used for diffusing sediment during any given time interval dt.</br>Finally, you will need to specify the output folder:</br></br>output: with dir the directory name and the option makedir that gives the possible to delete any existing output folder with the same name (if set to False) or to create a new folder with the give dir name plus a number at the end (e.g. outputDir_1 if set to True)umber at the end (e.g. outputDir_1 if set to True))
  • Model:LTRANS  + (Input files: # the NetCDF files from the R … Input files:</br># the NetCDF files from the ROMS hydrodynamic model</br># a comma delimited file that contains the particle locations, </br># comma delimited files that contain habitat boundaries for the Settlement Module. The latter is only needed if the Settlement Module is turned on.ded if the Settlement Module is turned on.)
  • Model:IDA  + (Input flow directions: 8 bit unsigned in … Input flow directions:</br> 8 bit unsigned integers</br></br> The numbers corresponding to each of the 9 possible flow directions are</br> shown below:</br></br> 32 64 128</br></br> 16 0 1</br></br> 8 4 2</br></br> So a cell with the value '1' means that the flow in that cell goes to the</br> East, while a value of '32' means that the cell's flow goes to the</br> North West. The value '0' implies that the cell is a sink and flow does not</br> leave it</br></br> Row major order is used.not leave it Row major order is used.)
  • Model:QDSSM  + (Input is in the form of values per time st … Input is in the form of values per time step for the following variables: files of rain fall, river inlet, sea-level, substratum thickness, tectonics, subsidence, while the model is calibrated through environmental coefficients, threshold slopes, threshold discharge, and set for interval time steps, number of time steps, environmental coefficients (m2/yr) and substratum grain size.icients (m2/yr) and substratum grain size.)
  • Model:CVPM  + (Input parameters are provided through several user-supplied files (see the CVPM modeling system user's guide).)
Retrieved from "https://csdms.colorado.edu/wiki/Special:SearchByProperty/:Describe-20input-20parameters-20model/Initial-20elevation-20(z)-0Agrid-20with-20cell-20type-20(A)"