Property:Describe output parameters model
From CSDMS
This is a property of type Text.
C
L
Matlab variables, Matlab graphs +
D
Matrices of:
Water surface elevation;
Water unit discharge and velocity field;
Delta surface elevation and bathymetry;
Stratigraphy
(User can choose which time step to output) +
M
Microsoft Excel tables +
T
Model Interface Capabilities:
There are three options available in the program interface:
* The Hydrograph Prediction Option: This option allows the model to be run and hydrographs displayed. If a Topographic Index Map File is available, then a map button is displayed that allows the display of predicted simulation, either as a summary over all timesteps or animated.
* The Sensitivity Analysis Option: This screen allows the sensitivity of the objective functions to changes of one or more of the parameters to be explored.
* The Monte Carlo Analysis Option: In this option a large number of runs of the model can be made using uniform random samples of the parameters chosen for inclusion in the analysis. Check boxes can be used to choose the variables and objective functions to be saved for each run. The results file produced will be compatible with the GLUE analysis software package. +
R
Model output:
* Complex amplitude,
* Wave Heights and angles
* Radiation stresses and forcing terms
* Wave induced mass flux
* Velocity moments for bottom stress calculation +
E
Model returns modified 'topographic__elevation', the model grid field holding model node elevations. +
M
A
NetCDF file (.sww) of x, y, elevation, flow depth, x and y momentum, and sediment concentration (all optional) +
C
Netcdf binaries of velocities and elevation screenshots in Master grid
�Netcdf binary of maximum water surface elevation in Master grid
�Netcdf Time histories of the water surface elevation at virtual gages;
Netcdf binaries of boundary input time-series for the enclosed grids, one �file for each boundary (east, west, north, south) +
S
Nodal field data: velocity, temperature
Element-centered (discontinuous) field data: strain rate, stress, plastic strain, etc. +
A
Numpy array of channel and overbank deposit +
M
Options (can be turned on or off):
Print evolving bed to screen.
A file with the bed with each time step, or at intermediate steps.
A file with the spectra of bed at each time step, or at intermediate steps.
A file with statistics (eg, rms roughness of bed) +
K
Output Files:
1. stage -- array containing information on flow at the edges of the model domain
2. depth -- flow depth at each grid cell at the end of the simulation
3. vel -- flow velocity at each grid cell at the end of the simulation
4. maxdepth -- maximum flow depth at each grid cell
4. maxvel -- maximum flow velocity at each grid cell +
E
K
Output data are written as GeoTIFF files, shapefiles, CSV files. +
I
Output drainage area, true drainage area, and initial guess:
64 bit float ('double')
Row major order is used.
The drainage area of cells with no drainage to or from them, such as ocean
cells, will be the area of the cell itself (1.0, if all cells are given
unit area). +
S
Output files provide snapshots of the bedform domain during its evolution. They containing elevation of bedform domain, the percentage full of sediment for all cells in the top layer, and the percent of coarse material in those top cells. Furthermore, there is output for the percent coarse of every cell in the domain (not just the top layer) for analyzing stratigraphic profiles. +
C
Output is '.dat' files showing vegetation cover density and DEM of the model domain at specified time intervals +
G
Output parameters:
* Marsh boundary - gives the position of the backbarrier marsh edge through time
* Shorelines - gives the position of the barrier shoreline through time
* step number - saves the surface morphology and stratigraphy for the model at each time step +
