Search by property
From CSDMS
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- Model:Morphodynamic gravel bed + (It's a reach scale. It is applied to 30km downstream of the Buech river. However, if dx is changed upward/downward, the time step should be adjusted.)
- Model:CEM + (Kilometers to hundreds of kilometers. Numerically, the model can be discretized with much smaller spatial resolution. However, the assumptions of approximately shore-parallel shoreface contours becomes unreasonable at scales smaller than kilometers.)
- Model:LISFLOOD + (LISFLOOD is grid-based, and applications so far have employed grid cells of as little as 100 metres (for medium-sized catchments), to 5,000 metres for modelling the whole of Europe and up to 0.1° (around 10 km) for modelling on a global scale.)
- Model:CASCADE + (Large scale (100 km+) model, suitable for orogenic scale modeling but could easily be adapted)
- Model:SPACE + (Length scale should be reach or larger (~100m and up). Run time depends on grid size and resolution.)
- Model:ErosionDeposition + (Length scale: ~10's of meters to ~1000's of km)
- Model:TUGS + (Length varies, resolution is on the order of several channel width (i.e., 1D model produces only reach-averaged results).)
- Model:GNE + (Limited by resolutn of input & river systems data; basins < 20,000 km2 currently poorly represented)
- Model:DeltaClassification + (Methods has been applied to data set of 100's of individual delta islands derived from Landsat satellite data (30-60m resolution).)
- Model:Icepack + (Minimum ~50m in x, maximum hundreds of kilometers)
- Model:FuzzyReef + (Model does not place any spatial constraints.)
- Model:River Temperature Model + (Model is 1D, we have used it over a x-section of a floodplain with varying flood inundation depth and durations.)
- Model:DeltaSIM + (Model is intended to generate stratigraphy for 2D profiles of large deltas (100's of km's))
- Model:Princeton Ocean Model (POM) + (Model used for grid size ranging from ~1m to 1000km)
- Model:1D Hillslope MCMC + (Model uses a fixed hillslope length of 30 m constrained from topographic measurements.)
- Model:Lake-Permafrost with Subsidence + (Near surface, length scale should be 5-10 cm if subsidence occurring. Deeper in permafrost, 1+ m okay.)
- Model:NearCoM + (Nearshore regions from shoreline to 10 meter water depth. Model resolution depends on specific modules.)
- Model:SNAC + (No inherent length scale or resolution as long as the continuum hypothesis is satisfied. A practical constraint on length scale and resolution is computational cost.)
- Model:CarboCAT + (No intrinsic constraints)
- Model:IceFlow + (No longitudinal coupling, not full Stokes)
- Model:MARSSIM V4 + (None except elapsed time and memory limits.)