Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• Model:Quad  + (In the field, this model is applicable in the range of landscape and regional scales (~10-100km). It has also been successfully applied at the scale of physical experiments.)
• Model:IDA  + (Increasing the number of processors should allow larger/higher resolution landscapes to be considered.)
• Model:RivMAP  + (Input channel masks can be arbitrary resolution)
• Model:HexWatershed  + (It is best performance for high resolution (<100m) simulation. With the version 3.0, coarser resolution is supported through stream burning feature.)
• Model:TOPOG  + (It is intended for application to small catchments (up to 10 km2, and generally smaller than 1 km2).)
• Model:Morphodynamic gravel bed  + (It's a reach scale. It is applied to 30km downstream of the Buech river. However, if dx is changed upward/downward, the time step should be adjusted.)
• Model:CEM  + (Kilometers to hundreds of kilometers. Numerically, the model can be discretized with much smaller spatial resolution. However, the assumptions of approximately shore-parallel shoreface contours becomes unreasonable at scales smaller than kilometers.)
• Model:LISFLOOD  + (LISFLOOD is grid-based, and applications so far have employed grid cells of as little as 100 metres (for medium-sized catchments), to 5,000 metres for modelling the whole of Europe and up to 0.1° (around 10 km) for modelling on a global scale.)
• Model:CASCADE  + (Large scale (100 km+) model, suitable for orogenic scale modeling but could easily be adapted)
• Model:SPACE  + (Length scale should be reach or larger (~100m and up). Run time depends on grid size and resolution.)

• Model:ErosionDeposition  + (Length scale: ~10's of meters to ~1000's of km)

• Model:TUGS  + (Length varies, resolution is on the order of several channel width (i.e., 1D model produces only reach-averaged results).)
• Model:GNE  + (Limited by resolutn of input & river systems data; basins < 20,000 km2 currently poorly represented)
• Model:DeltaClassification  + (Methods has been applied to data set of 100's of individual delta islands derived from Landsat satellite data (30-60m resolution).)
• Model:Icepack  + (Minimum ~50m in x, maximum hundreds of kilometers)
• Model:FuzzyReef  + (Model does not place any spatial constraints.)
• Model:River Temperature Model  + (Model is 1D, we have used it over a x-section of a floodplain with varying flood inundation depth and durations.)
• Model:DeltaSIM  + (Model is intended to generate stratigraphy for 2D profiles of large deltas (100's of km's))
• Model:Princeton Ocean Model (POM)  + (Model used for grid size ranging from ~1m to 1000km)
• Model:1D Hillslope MCMC  + (Model uses a fixed hillslope length of 30 m constrained from topographic measurements.)
• Model:Lake-Permafrost with Subsidence  + (Near surface, length scale should be 5-10 cm if subsidence occurring. Deeper in permafrost, 1+ m okay.)