Search by property
From CSDMS
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- Model:Radiation + (grid: RasterModelGrid<br> A grid. m … grid: RasterModelGrid<br></br>A grid.</br></br>method: {'Grid'}, optional<br></br>Currently, only default is available.</br></br>cloudiness: float, optional<br></br>Cloudiness.</br></br>latitude: float, optional<br></br>Latitude (radians).</br></br>albedo: float, optional<br></br>Albedo.</br></br>solar_constant: float, optional<br></br>Solar Constant (W/m^2).</br></br>clearsky_turbidity: float, optional<br></br>Clear sky turbidity.</br></br>opt_airmass: float, optional<br></br>Optical air mass.</br></br>current_time: float<br></br>Current time (years).</br> </br>hour: float, optional<br></br>Hour of the day. Default is 12 (solar noon); Current time (years). hour: float, optional<br> Hour of the day. Default is 12 (solar noon))
- Model:SoilMoisture + (grid: RasterModelGrid<br> A grid. r … grid: RasterModelGrid<br></br>A grid.</br></br>runon: float, optional<br></br>Runon from higher elevation (mm).</br></br>f_bare: float, optional<br></br>Fraction to partition PET for bare soil (None).</br></br>soil_ew: float, optional<br></br>Residual Evaporation after wilting (mm/day).</br></br>intercept_cap: float, optional<br></br>Plant Functional Type (PFT) specific full canopy interception capacity.</br></br>zr: float, optional<br></br>Root depth (m).</br></br>I_B: float, optional<br></br>Infiltration capacity of bare soil (mm/h).</br></br>I_V: float, optional<br></br>Infiltration capacity of vegetated soil (mm/h).</br></br>pc: float, optional<br></br>Soil porosity (None).</br></br>fc: float, optional<br></br>Soil saturation degree at field capacity (None).</br></br>sc: float, optional<br></br>Soil saturation degree at stomatal closure (None).</br></br>wp: float, optional<br></br>Soil saturation degree at wilting point (None).</br></br>hgw: float, optional<br></br>Soil saturation degree at hygroscopic point (None).</br></br>beta: float, optional<br></br>Deep percolation constant = 2*b+3 where b is water retention (None).</br></br>LAI_max: float, optional<br></br>Maximum leaf area index (m^2/m^2).</br></br>LAIR_max: float, optional<br></br>Reference leaf area index (m^2/m^2).</br></br>method: str<br></br>Method used</br></br>Tr: float, optional<br></br>Storm duration (hours).</br></br>Tb: float, optional<br></br>Inter-storm duration (hours).</br></br>current_time: float<br></br>Current time (years).loat, optional<br> Storm duration (hours). Tb: float, optional<br> Inter-storm duration (hours). current_time: float<br> Current time (years).)
- Model:FireGenerator + (grid: landlab model grid<br><br&g … grid: landlab model grid<br><br></br>mean_fire_recurrence : float<br></br>Average time between fires for a given location<br><br></br>shape_parameter : float<br></br>Describes the skew of the Weibull distribution.<br></br>If shape < 3.5, data skews left.<br></br>If shape == 3.5, data is normal.<br></br>If shape > 3.5, data skews right.<br><br></br>scale_parameter : float, optional<br></br>Describes the peak of the Weibull distribution, located at the</br>63.5% value of the cumulative distribution function. If unknown,</br>it can be found using mean fire recurrence value and the</br>get_scale_parameter().ative distribution function. If unknown, it can be found using mean fire recurrence value and the get_scale_parameter().)
- Model:GeoClaw + (http://www.clawpack.org/setrun_geoclaw.html http://www.clawpack.org/topo.html)
- Model:PRMS + (http://wwwbrr.cr.usgs.gov/projects/SW_MoWS/software/oui_and_mms_s/prms.shtml)
- Model:WACCM-CARMA + (hundreds of physical parameters)
- Model:GreenAmptInfiltrationModel + (hydraulic conductivity, time resolution, rainfall intensity, the change in the moisture content, wetting front soil suction head)
- Model:SIMSAFADIM + (initial basin configuration, boundary conditions for fluid flow and sediment input, conditions for carbonate producing organisms, sea level changes, temporal changes in boundary conditions)
- Model:PISM + (initial bedrock and glacier topographies, geothermal heat flux, and climate forcing)
- Model:Cliffs + (integer - type of coordinates (1 - cartesi … integer - type of coordinates (1 - cartesian, otherwise-spherical)</br>DEM file name</br>number of grids enclosed in Master grid</br>enclosed DEMs file names if any</br>still sea threshold</br>minimal flow depth</br>friction coefficient</br>topo flag: 0-wall, otherwise - land inundation</br>depth to place vertical wall, if any</br>time step </br>total amount of steps </br>integer - apply initial deformation to bottom or sea surface</br>integer - flag to continue or stop after input stops (0 for interrupt)</br>number of steps between screenshots</br>number to subsample screenshots in x</br>number to subsample screenshots in y</br>number of timesteps between saving boundary feed to enclosed grids</br>number of steps between maxwave updates</br>number of virtual gages</br>steps between outputs in gage time histories</br>i,j indexes of gage locations on the grid i,j indexes of gage locations on the grid)
- Model:Demeter + (land class info,)
- Model:YANGs + (mean bed shear stress, median bed grain size)
- Model:GrainHill + (model_type: 'grainhill', 'block', or 'face … model_type: 'grainhill', 'block', or 'facet' (default 'grainhill')</br>number_of_node_rows: # rows</br>number_of_node_columns: # columns</br>cell_width: width of grid cells, m</br>grav_accel: gravitational acceleration, m/s2</br>friction_coef: dimensionless friction factor, 0 to 1</br>run_duration: duration of run, years</br>uplift_interval: time interval between uplift events, years</br>dissolution_rate: (facet only) rate coefficient for dissolution, 1/years</br>disturbance_rate: frequency parameter for soil disturbance, 1/years</br>weathering_rate: frequency parameter for rock weathering, 1/years</br>rock_state_for_uplift: type of material added at base during uplift (7=soil, 8=rock)</br>block_layer_dip_angle: ('block' only) dip angle for layer made of blocks</br>block_layer_thickness: ('block' only) thickness, in cells, of layer</br>layer_left_x: ('block' only) x coordinate of left edge of layer</br>y0_top: ('block' only) if block option selected, y coordinate of top of layer at x=0</br>fault_x: ('facet' only) x location of fault trace at y=0, m</br>baselevel_rise_interval: ('facet' only) rate of left-side baselevel rise, m/yr</br>opt_rock_collapse: option to have rock cells collapse when undermined</br>save_plots: whether to save any plots to file (True or False)</br>plot_filename: base name for plot files, if used</br>plot_filetype: filename extension for plots (default '.png')</br>plot_interval: interval between plots, years</br>output_interval: interval between file output, years</br>report_interval: real-time interval for reporting on screen, seconds interval for reporting on screen, seconds)
- Model:ModelParameterDictionary + (n/a)
- Model:Gospl + (paleo-landscape, paleo-climate, plate reconstruction)
- Model:RiverSynth + (reach averaged bankfull width, slope, grain size, shields parameter, control function parameters)
- Model:XBeach + (rectilinear grid, bathymetry, boundary spectral parameters, water levels, sediment sizes, model parameters)
- Model:PyRiverBed + (river centerline XY coordinates)
- Model:Mosartwmpy + (river channel network, runoff, water demand, reservoir operations)
- Model:MODFLOW 6 + (see MODFLOW 6 Description of Input/Output at https://water.usgs.gov/water-resources/software/MODFLOW-6)
- Model:TAo + (see documentation along with source code, also available here: https://sites.google.com/site/daniggcc/software/tao)