Describe input parameters
|
The input includes file names for output, subgrid information, physical parameters and wave conditions. Water depth is obtained from the master program though a file name for water depth input is still kept in "indat.dat".
|
Input format
|
Binary
|
Other input format
|
|
Describe output parameters
|
Model output:
- Complex amplitude,
- Wave Heights and angles
- Radiation stresses and forcing terms
- Wave induced mass flux
- Velocity moments for bottom stress calculation
|
Output format
|
Binary
|
Other output format
|
|
Pre-processing software needed?
|
Yes
|
Describe pre-processing software
|
In cases where the standard required the use of a non-typical format (as in the use of the machine-independent binary HDF formats for large arrays), then the data transfer to and from LRSS is handled using a pre- and post-processing layer.
|
Post-processing software needed?
|
Yes
|
Describe post-processing software
|
In cases where the standard required the use of a non-typical format (as in the use of the machine-independent binary HDF formats for large arrays), then the data transfer to and from LRSS is handled using a pre- and post-processing layer.
|
Visualization software needed?
|
No
|
If above answer is yes
|
|
Other visualization software
|
|