Property:Describe output parameters model
From CSDMS
This is a property of type Text.
1
Current thickness, velocity, and D50 for active layer and in suspension. +
B
C
DEM, Flow patterns, Inundation, Grainsize and others +
D
DLBRM output includes, for every cell in the watershed grid, surface runoff to surface storage, infiltration to USZ, ET, ETP, percolation from USZ to LSZ, interflow from LSZ to surface storage, deep percolation from LSZ to groundwater storage, groundwater flow from groundwater storage to surface storage, surface moisture storage, USZ, and LSZ moisture storages, groundwater storage, and lateral flows from storages to adjacent cells for the surface (channel outflow), USZ, LSZ, and groundwater (Changsheng He and Thomas E. Croley II, 2007). +
Dakotathon produces no output parameters; instead, it creates the standard Dakota output files '''dakota.out''' and '''dakota.dat'''. +
K
Dampening effects of vegetation and snow on temperature
Mean annual active layer thickness
Mean annual temperature at the permafrost ground surface +
B
W
H
T
Depend on different modules that are using, it can produce hydrodynamics, such as water velocity and depth; vertical density (3D); temperature plumes and salt wedge; water quality; sediment concentration and transport; underground water velocity field; wave parameters; +
G
Depending on the flags indicated in the input file, typical flow quantities are stored to the file at the given time steps.<br>
Velocities, Pressure, Concentration (of the particles).<br>
Depending on the problems, some other quantities could be stored too. +
T
Depending on the flags set in the "input.inp" file, flow properties such as velocity, pressure, particle concentration(s), particle deposit mass, bottom shear stress, kinetic and potential energy, dissipation rate, suspended particle mass, current front location, and etc are recorded at the given timesteps. +
G
Depth, momentum on adaptive grid at specified output times.
Time series at specified gauge locations.
Maxima observed over full simulation on specified grid. +
H
F
Dynamic variables:
# water energy
# depositional (seafloor) slope
Final output:
# carbonate productivity rate
# depositional facies +
B
Elevation and slope arrays as well as optional information about bed cover and shear stress distributions, as well as block size distributions and incision rate records. +
K
Elevation, Biomass, Accretion Rate, Erosion Rate, and other characteristics of every cell in domain. Also outputs spatially averaged statistics. +
G
L
S
