Property:Extended model description
From CSDMS
This is a property of type Text.
D
DynEarthSol3D (Dynamic Earth Solver in Three Dimensions) is a flexible, open-source finite element code that solves the momentum balance and the heat transfer in Lagrangian form using unstructured meshes. It can be used to study the long-term deformation of Earth's lithosphere and problems alike. +
DynQual is a high-spatio-temporal-resolution surface water quality model, which can be used to simulate water temperature; concentrations of total dissolved solids to represent salinity pollution; biological oxygen demand to represent organic pollution; and fecal coliform as a coarse indicator for pathogen pollution. +
E
ECSimpleSnow is a simple snow model that employs an empirical algorithm to melt or accumulate snow based on surface temperature and precipitation that has fallen since the previous analysis step. +
EF5 was created by the Hydrometeorology and Remote Sensing Laboratory at the University of Oklahoma. The goal of EF5 is to have a framework for distributed hydrologic modeling that is user friendly, adaptable, expandable, all while being suitable for large scale (e.g. continental scale) modeling of flash floods with rapid forecast updates. Currently EF5 incorporates 3 water balance models including the Sacramento Soil Moisture Accouning Model (SAC-SMA), Coupled Routing and Excess Storage (CREST), and hydrophobic (HP). These water balance models can be coupled with either linear reservoir or kinematic wave routing. +
ELCIRC is an unstructured-grid model designed for the effective simulation of 3D baroclinic circulation across river-to-ocean scales. It uses a finite-volume/finite-difference Eulerian-Lagrangian algorithm to solve the shallow water equations, written to realistically address a wide range of physical processes and of atmospheric, ocean and river forcings. The numerical algorithm is low-order, but volume conservative, stable and computationally efficient. It also naturally incorporates wetting and drying of tidal flats. ELCIRC has been extensively tested against standard ocean/coastal benchmarks, and is starting to be applied to estuaries and continental shelves around the world. +
Ecopath with Ecosim (EwE) is an ecological modeling software suite for personal computers. EwE has three main components: Ecopath – a static, mass-balanced snapshot of the system; Ecosim – a time dynamic simulation module for policy exploration; and Ecospace – a spatial and temporal dynamic module primarily designed for exploring impact and placement of protected areas. The Ecopath software package can be used to:
*Address ecological questions;
*Evaluate ecosystem effects of fishing;
*Explore management policy options;
*Evaluate impact and placement of marine protected areas;
*Evaluate effect of environmental changes. +
Erode is a raster-based, fluvial landscape evolution model. The newest version (3.0) is written in Python and contains html help pages when running the program through the CSDMS Modeling Tool CMT (https://csdms.colorado.edu/wiki/Help:Ccaffeine_GUI). +
Erode-D8-Global is a raster, D8-based fluvial landscape evolution model (LEM) +
L
Exposures to heat and sunlight can be simulated and the resulting signals shown. For a detailed description of the underlying luminescence rate equations, or to cite your use of LuSS, please use Brown, (2020). +
S
Extended description for SINUOUS - Meander Evolution Model. The basic model simulates planform evolution of a meandering river starting from X,Y coordinates of centerline nodes, with specification of cross-sectional and flow parameters. If the model is intended to simulate evolution of an existing river, the success of the model can be evaluated by the included area between the simulated and the river centerline. In addition, topographic evolution of the surrounding floodplain can be simulated as a function of existing elevation, distance from the nearest channel, and time since the channel migrated through that location. Profile evolution of the channel can also be modeled by backwater flow routing and bed sediment transport relationships. +
F
FACET is a Python tool that uses open source modules to map the floodplain extent and derive reach-scale summaries of stream and floodplain geomorphic measurements from high-resolution digital elevation models (DEMs). Geomorphic measurements include channel width, stream bank height, floodplain width, and stream slope.<br>Current tool functionality is only meant to process DEMs within the Chesapeake Bay and Delaware River watersheds. FACET was developed to batch process 3-m resolution DEMs in the Chesapeake Bay and Delaware River watersheds. Future updates to FACET will allow users to process DEMs outside of the Chesapeake and Delaware basins.<br>FACET allows the user to hydrologically condition the DEM, generate the stream network, select one of two options for stream bank identification, map the floodplain extent using a Height Above Nearest Drainage (HAND) approach, and calculate stream and floodplain metrics using three approaches. +
FUNWAVE is a phase-resolving, time-stepping Boussinesq model for ocean surface wave propagation in the nearshore. +
FVCOM is a prognostic, unstructured-grid, finite-volume, free-surface, 3-D primitive equation coastal ocean circulation model developed by UMASSD-WHOI joint efforts. The model consists of momentum, continuity, temperature, salinity and density equations and is closed physically and mathematically using turbulence closure submodels. The horizontal grid is comprised of unstructured triangular cells and the irregular bottom is preseented using generalized terrain-following coordinates. The General Ocean Turbulent Model (GOTM) developed by Burchard’s research group in Germany (Burchard, 2002) has been added to FVCOM to provide optional vertical turbulent closure schemes. FVCOM is solved numerically by a second-order accurate discrete flux calculation in the integral form of the governing equations over an unstructured triangular grid. This approach combines the best features of finite-element methods (grid flexibility) and finite-difference methods (numerical efficiency and code simplicity) and provides a much better numerical representation of both local and global momentum, mass, salt, heat, and tracer conservation. The ability of FVCOM to accurately solve scalar conservation equations in addition to the topological flexibility provided by unstructured meshes and the simplicity of the coding structure has make FVCOM ideally suited for many coastal and interdisciplinary scientific applications. +
Fall velocity for spheres. Uses formulation of Dietrich (1982) +
Z
Finite difference approximations are great for modeling the erosion of landscapes. A paper by Densmore, Ellis, and Anderson provides details on application of landscape evolution models to the Basin and Range (USA) using complex rulesets that include landslides, tectonic displacements, and physically-based algorithms for hillslope sediment transport and fluvial transport. The solution given here is greatly simplified, only including the 1D approximation of the diffusion equation. The parallel development of the code is meant to be used as a class exercise +
S
Finite element process based simulation model for fluid flow, clastic, carbonate and evaporate sedimentation. +
For each time step, this component calculates an infiltration rate for a given model location and updates surface water depths. Based on the Green-Ampt method, it follows the form of Julien et al., 1995. +
M
Fortran 95 routines to model the ocean carbonate system (mocsy). Mocsy take as input dissolved inorganic carbon CT and total alkalinity AT, the only two tracers of the ocean carbonate system that are unaffected by changes in temperature and salinity and conservative with respect to mixing, properties that make them ideally suited for ocean carbon models. With basic thermodynamic equilibria, mocsy compute surface-ocean pCO2 in order to simulate air-sea CO2 fluxes. The mocsy package goes beyond the OCMIP code by computing all other carbonate system variables (e.g., pH, CO32-, and CaCO3 saturation states) and by doing so throughout the water column. +
F
FuzzyReef is a three-dimensional (3D) numerical stratigraphic model that simulates the development of microbial reefs using fuzzy logic (multi-valued logic) modeling methods. The flexibility of the model allows for the examination of a large number of variables. This model has been used to examine the importance of local environmental conditions and global changes on the frequency of reef development relative to the temporal and spatial constraints from Upper Jurassic (Oxfordian) Smackover reef datasets from two Alabama oil fields.
The fuzzy model simulates the deposition of reefs and carbonate facies through integration of local and global variables. Local-scale factors include basement relief, sea-level change, climate, latitude, water energy, water depth, background sedimentation rate, and substrate conditions. Regional and global-scale changes include relative sea-level change, climate, and latitude. +
G
GENESIS calculates shoreline change produced by statial and temporal differences in longshore sand transport produced by breaking waves. The shoreline evolution portion of the numerical modeling system is based on one-line shoreline change theory, which assumes that the beach profile shape remains unchanged, allowing shoreline change to be described uniquely in terms of the translation of a single point (for example, Mean High Water shoreline) on the profile. +
