Model:Sedflux: Difference between revisions

Latest revision as of 19:18, 16 September 2020

Sedflux

Metadata

Also known as
Model type	Modular
Model part of larger framework
Note on status model
Date note status model

Incorporated models or components:

Spatial dimensions	2D, 3D
Spatial extent
Model domain	Coastal, Marine
One-line model description	Basin filling stratigraphic model
Extended model description	Sedflux-2.0 is the newest version of the Sedflux basin-filling model. Sedflux-2.0 provides a framework within which individual process-response models of disparate time and space resolutions communicate with one another to deliver multi grain sized sediment load across a continental margin.

Keywords:	sediment transport, geodynamics, stratigraphy,

Name	Eric Hutton
Type of contact	Model developer
Institute / Organization	CSDMS, INSTAAR, University of Colorado
Postal address 1	1560 30th street
Postal address 2
Town / City	Boulder
Postal code	80305
State	Colorado
Country	United States
Email address	huttone@colorado.edu
Phone
Fax

Supported platforms	Unix, Linux, Mac OS
Other platform
Programming language	C
Other program language
Code optimized
Multiple processors implemented
Nr of distributed processors
Nr of shared processors
Start year development	1997
Does model development still take place?	Yes
If above answer is no, provide end year model development
Code development status	Only maintenance
When did you indicate the 'code development status'?	2020
Model availability	As code
Source code availability (Or provide future intension)	Through web repository
Source web address	https://github.com/mcflugen/sedflux
Source csdms web address
Program license type	GPL v2
Program license type other
Memory requirements	2GB
Typical run time	minutes to days

Describe input parameters	River mouth characteristics (velocity, width, depth, concentration) averaged daily, or longer. Initial bathymetry. Input sediment distribution and properties of each grain type. Optionally, any of: tectonics, sea level, wave climate, and currents
Input format	ASCII
Other input format
Describe output parameters	Sediment properties that include (but are not limited to) bulk density, grain size, porosity, and permeability. These are averaged over are user-specified vertical resolution (typically mm to cm). Sea-floor properties that include slope, water depth, and sand fraction.
Output format	Binary
Other output format
Pre-processing software needed?	No
Describe pre-processing software
Post-processing software needed?	No
Describe post-processing software
Visualization software needed?	Yes
If above answer is yes	Matlab
Other visualization software

Describe processes represented by the model	surface plumes, hyperpycnal plumes, sediment slope failure that results in turbidity currents or debris flows, subsidence, compaction, sediment remobilization due to waves and currents, river avulsion
Describe key physical parameters and equations	Too numerous to list.
Describe length scale and resolution constraints	Vertically: mm to cm; Horizontally: 10s of m to 1000 of m
Describe time scale and resolution constraints	Days or greater. Component processes can have much higher resolutions for numerical stability.
Describe any numerical limitations and issues	--

Describe available calibration data sets
Upload calibration data sets if available:
Describe available test data sets
Upload test data sets if available:
Describe ideal data for testing

Do you have current or future plans for collaborating with other researchers?	None

Is there a manual available?	Yes
Upload manual if available:
Model website if any	https://github.com/mcflugen/sedflux
Model forum / discussion board

Comments	No

This part will be filled out by CSDMS staff

OpenMI compliant	No but possible
BMI compliant	Yes
WMT component	Yes
PyMT component	Yes
Is this a data component

DOI model	10.1594/IEDA/100161
For model version	2.1
Year version submitted	2011
Link to file	https://csdms.colorado.edu/pub/models/doi-source-code/sedflux-10.1594.IEDA.100161-2.1.tar.gz

Can be coupled with:

Model info

Authors

Eric Hutton

Source code

Go to external source code site

DOI

Download Sedflux [ version: 2.1]
Doi: 10.1594/IEDA/100161

Model citations

Nr. of publications:	25
Total citations:	822
h-index:	15
m-quotient:	0.62

QR-code

Link to this page

Other models by author

sedflux-2.0

Sedflux-2.0 is the newest version of the Sedflux basin-filling model. Sedflux-2.0 provides a framework within which individual process-response models of disparate time and space resolutions communicate with one another to deliver multi grain sized sediment load across a continental margin. Version 2.0 introduces a series of new process models, and the ability to operate in one of two modes to track the evolution of stratigraphy in either two or three dimensions. Additions to the 2D-mode include the addition of models that simulate

erosion and deposition of sediment along a riverbed,
cross-shore transport due to ocean waves, and
turbidity currents and hyperpycnal flows.

New processes in the 3D-mode include

river channel avulsion,
two-dimensional diffusion due to ocean storms, and
two-dimensional flexure due to sediment loading.

The spatial resolution of the architecture is typically 1-25 cm in the vertical, and 10-100 m in the horizontal when operating in 2D-mode. In 3D-mode, the ....

References

Nr. of publications:	25
Total citations:	822
h-index:	15
m-quotient:	0.62

Featured publication(s)	Year	Model described	Type of Reference	Citations
Overeem, I.; Syvitski, J.P.M.; Hutton, E.W.H.; 2005. Three-dimensional numerical modeling of deltas.. River Deltas: concepts, models and examples. Volume 83. (View/edit entry)	2005	AquaTellUs Sedflux	Model overview	60
Hutton, Eric W.H.; Syvitski, James P.M.; 2008. Sedflux 2.0: An advanced process-response model that generates three-dimensional stratigraphy. Computers & Geosciences, 34, 1319–1337. 10.1016/j.cageo.2008.02.013 (View/edit entry)	2008	Avulsion Diffusion Plume Sedflux Subside	Model overview	72
Syvitski, James P.M; Hutton, Eric W.H; 2001. 2D SEDFLUX 1.0C:. Computers & Geosciences, 27, 731–753. 10.1016/S0098-3004(00)00139-4 (View/edit entry)	2001	Diffusion Sedflux	Model overview	100
See more publications of Sedflux

@@ Line 5: / Line 5: @@
 {{End a table}}
 {{Model identity2
-|Categories=Coastal, Marine
+|ModelDomain=Coastal, Marine
 |Spatial dimensions=2D, 3D
 |One-line model description=Basin filling stratigraphic model
@@ Line 29: / Line 29: @@
 |Town / City=Boulder
 |Postal code=80305
+|Country=United States
 |State=Colorado
-|Country=USA
 |Email address=huttone@colorado.edu
 }}
@@ Line 36: / Line 36: @@
 |Supported platforms=Unix, Linux, Mac OS
 |Programming language=C
-|Multiple processors implemented=
-|Nr of distributed processors=
-|Nr of shared processors=
 |Start year development=1997
 |Does model development still take place?=Yes
-|End year development=
+|DevelopmentCode=Only maintenance
+|DevelopmentCodeYearChecked=2020
 |Model availability=As code
 |Source code availability=Through web repository
 |Source web address=https://github.com/mcflugen/sedflux
-|ViewVC web address=https://github.com/mcflugen/sedflux
 |Program license type=GPL v2
-|Program license type other=
 |Memory requirements=2GB
 |Typical run time=minutes to days
@@ Line 61: / Line 57: @@
 |Output format=Binary
 |Pre-processing software needed?=No
-|Describe pre-processing software=
 |Post-processing software needed?=No
-|Describe post-processing software=
 |Visualization software needed?=Yes
 |If above answer is yes=Matlab
@@ Line 87: / Line 81: @@
 {{CSDMS staff part
 |OpenMI compliant=No but possible
-|CCA component=Yes
 |IRF interface=Yes
 |CMT component=Yes
+|PyMT component=Yes
+|CCA component=Yes
 }}
 {{DOI information
@@ Line 95: / Line 90: @@
 |DOI assigned to model version=2.1
 |DOI-year assigned to model version=2011
+|DOI-filelink=https://csdms.colorado.edu/pub/models/doi-source-code/sedflux-10.1594.IEDA.100161-2.1.tar.gz
 }}
 {{Start coupled table}}
 {{End a table}}
 {{End headertab}}
+{{{{PAGENAME}}_autokeywords}}
 <!-- available source code can be: not, owner, source, commercial -->
-{{#ifexist:Template:{{#sub:{{PAGENAME}}|0|1}}{{#sub:{{lc:{{PAGENAME}}}}|1}} download stats | ==Download statistics==
-{{{{#sub:{{PAGENAME}}|0|1}}{{#sub:{{lc:{{PAGENAME}}}}|1}} download stats}} | }}
 == ''sedflux-2.0''  ==
@@ Line 125: / Line 121: @@
 <!-- This page is no longer viewable. Need to update link when a new page is created.
-[http://csdms.colorado.edu/trac/sedflux/ Read more....].
+[https://csdms.colorado.edu/trac/sedflux/ Read more....].
 -->
 == References  ==
-{{Add_reference_upload_button}}
+<br>{{AddReferenceUploadButtons}}<br><br>
-{{Add_model_references}}
+{{#ifexist:Template:{{PAGENAME}}-citation-indices|{{{{PAGENAME}}-citation-indices}}|}}<br>
+{{Include_featured_references_models_cargo}}<br>
-Paola, C., J. Mullin, C. Ellis, D. C. Mohrig, J. B. Swenson, G. Parker, T. Hickson, P. L. Heller, L. Pratson, JPM Syvitski, B. Sheets, N. Strong, 2001. Experimental Stratigraphy, GSA Today, 11(7): 4-9.
-Syvitski, JPM, Pratson, L.F., Wiberg, P.L., Steckler, M.S., Garcia, M.H., Geyer, W.R., Harris, C.K., Hutton, E.W.H., Imran, J., Lee, H.J., Morehead, M.D., and Parker, G., 2007. Prediction of margin stratigraphy. In: C.A. Nittrouer, J.A. Austin, M.E. Field, J.H. Kravitz, JPM Syvitski, and P.L. Wiberg (Eds.) Continental-Margin Sedimentation: From Sediment Transport to Sequence Stratigraphy. IAS Spec. Publ. No. 37: 459-530
-O’Grady, D.B., and Syvitski, JPM, 2001. Predicting profile geometry of continental slopes with a multiprocess sedimentation model. In: D.F. Merriam and J.C. Davis (eds.) Geological Modeling and Simulation: Sedimentary Systems. Kluwer Academic/Plenum Publishers, New York, p. 99-117.
-Overeem, I., Syvitski, JPM, Hutton, E.W.H., 2005, Three-dimensional numerical modeling of deltas. In: L. Giosan and JPM Bhattacharya (Eds.), River Deltas — Concepts, Models, and Examples. SEPM Special Publication No. 83, pp. 13-30.
-Overeem, I., Syvitski, JPM, 2010, Experimental exploration of the stratigraphy of fjords fed by glacio-fluvial systems, Howe, J. A., Austin, W. E. N., Forwick, M. & Paetzel, M. (eds) Fjord Systems and Archives. Geological Society, London, Special Publications, 344, 127–144.