Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

Model:MarshMorpho2D + (elevation through time many other parameters can be saved during the simulations (e.g., velocity, suspended sediment concentration))
Model:LinearDiffuser + (elevation; slope gradient; soil unit discharge)
Model:HEBEM + (elevations of all nodes elevation changes of all nodes)
Model:Equilibrium Calculator + (equilibrium channel slope, width and depth … equilibrium channel slope, width and depth, bankfull discharge, point bar height, difference in elevation between eroding and depositing banks, channel migration rate, overbank deposition rates of sand and mud, volume fraction content of sand and mud in the floodplain.content of sand and mud in the floodplain.)
Model:Gospl + (evolving landscape, stratigraphy)
Model:Alpine3D + (for every grid cell: air and surface tempe … for every grid cell: air and surface temperature, relative humidity, short and long wave radiation, snow height, snow water content, albedoGlobal outputs: catchment discharge, surface and subsurface flowAt user defined locations: full snow profiles (temperature profile, grain types, grain sizes, density, water content, liquid water content)sity, water content, liquid water content))
Model:VIC + (http://www.hydro.washington.edu/Lettenmaier/Models/VIC/Documentation/Inputs.shtml)
Model:PRMS + (http://wwwbrr.cr.usgs.gov/projects/SW_MoWS/software/oui_and_mms_s/prms.shtml)
Model:WACCM-CARMA + (hundreds of physical parameters)
Model:ISSM + (ice flow of an ice sheet, sea-level rise, visco-elastic uplift)

Model:IceFlow + (ice thickness, ice velocity)

Model:ZoneController + (list of Zones: The discrete zones identified in the mask.)
Model:WAVEREF + (locus of points defining a wave ray)
Model:ModelParameterDictionary + (n/a)
Model:WACCM-EE + (netcdf output files describing atmospheric state, chemistry, etc)
Model:GrainHill + (node state grid written to netCDF file (each node gets a code from 0 to 8; see papers))
Model:Coastal Landscape Transect Model (CoLT) + (organic (allochthonous and autochthonous) and mineral deposition, bay extent, forest extent, marsh extent are the primary outputs)
Model:MARM5D + (rasters of (at ArcGIS ASCII format): 1. so … rasters of (at ArcGIS ASCII format):1. soil PSD (d50) for each soil-profile layer at the end of the simulation (e.g. D50aL13.txt)2. surface soil PSD (d50) at defined temporal increments (e.g. d50aL038.00pc.txt)3. soil depth (cm) at defined temporal increments (e.g. DepthL038.00pc.txt)4. total soil erosion (TotalErosion.txt)5. soil PSD at the end of the simulation - a layer describing the % of each PSD grading classdescribing the % of each PSD grading class)
Model:FlowDirectorDinf + (receivers : ndarray of size (num nodes, ma … receivers : ndarray of size (num nodes, max neighbors at node) For each node, the IDs of the nodes that receive its flow. For nodes that do not direct flow to all neighbors, grid.BAD_INDEX is given as a placeholder. The ID of the node itself is given if no other receiver is assigned. proportions : ndarray of size (num nodes, max neighbors at node) For each receiver, the proportion of flow (between 0 and 1) is given. A proportion of zero indicates that the link does not have flow along it. slopes: ndarray of size (num nodes, max neighbors at node) For each node in the array ``recievers``, the slope value (positive downhill) in the direction of flow. If no flow occurs (value of ``recievers`` is -1), then this array is set to 0. steepest_slope : ndarray The slope value (positive downhill) in the direction of flow. steepest_receiver : ndarray For each node, the node ID of the node connected by the steepest link. grid.BAD_INDEX is given if no flow emmanates from the node. sink : ndarray IDs of nodes that are flow sinks (they are their own receivers) receiver_links : ndarray of size (num nodes, max neighbors at node) ID of links that leads from each node to its receiver, or grid.BAD_INDEX if no flow occurs on this link. steepest_link : ndarray For each node, the link ID of the steepest link. grid.BAD_INDEX is given if no flow emanates from the node. link ID of the steepest link. grid.BAD_INDEX is given if no flow emanates from the node.)
Model:FlowDirectorMFD + (receivers : ndarray of size (num nodes, ma … receivers : ndarray of size (num nodes, max neighbors at node) For each node, the IDs of the nodes that receive its flow. For nodes that do not direct flow to all neighbors, BAD_INDEX_VALUE is given as a placeholder. The ID of the node itself is given if no other receiver is assigned. proportions : ndarray of size (num nodes, max neighbors at node) For each receiver, the proportion of flow (between 0 and 1) is given. A proportion of zero indicates that the link does not have flow along it. slopes: ndarray of size (num nodes, max neighbors at node) For each node in the array ``recievers``, the slope value (positive downhill) in the direction of flow. If no flow occurs (value of ``recievers`` is -1), then this array is set to 0. steepest_slope : ndarray The slope value (positive downhill) in the direction of flow. steepest_receiver : ndarray For each node, the node ID of the node connected by the steepest link. BAD_INDEX_VALUE is given if no flow emmanates from the node. sink : ndarray IDs of nodes that are flow sinks (they are their own receivers) receiver_links : ndarray of size (num nodes, max neighbors at node) ID of links that leads from each node to its receiver, or BAD_INDEX_VALUE if no flow occurs on this link. steepest_link : ndarray For each node, the link ID of the steepest link. BAD_INDEX_VALUE is given if no flow emanates from the node. link ID of the steepest link. BAD_INDEX_VALUE is given if no flow emanates from the node.)
Model:DECAL + (resultant landscape topography and vegetation distributions; annual avalanching statistics)