Model help:GIPL

GIPL

GIPL is a heat flow with phase change model use to model permafrost thermal state and active layer depth, can be used for site specific and regional ground temperature distribution modeling.

Model introduction

GIPL(Geophysical Institute Permafrost Laboratory) is an implicit finite difference transient one-dimensional heat flow model. The model simulates ground temperature dynamics and the depth of the active layer by solving non-linear heat equation with phase change numerically. The model employs the Enthalpy method which does not require explicit treatment of the freeze/thaw moving boundary. In this model the process of freezing or thawing is occurring in accordance with unfrozen water content and soil thermal properties, and depends on the degree of soil saturation.

Model parameters

Parameter	Description	Unit
Switcher	1 runs new simulation reading initial temperature distribution from initial.txt file in input folder, 0 continues simulation by reading initial temperatures from dump/start_001.txt file	-
Output time step	Output calculated temperatures based on output time step input. For example, 1 correspond to 1 day time interval. The result.txt file has the temperature distribution output based on the output time interval.	days
Calculation step	Calculation time step used in Stefan subroutine.	-
Minimal time step	Minimum time step is a constrain for calculation time step used in Stefan subroutine.	-
Number of years	If the number is greater than 1 then the model simulates the ground temperature distribution and write mean annual temperature distribution with depth into mean_001.txt file.	years

Parameter	Description	Unit
First parameter	Description parameter	[Units]

Uses ports

This will be something that the CSDMS facility will add

Provides ports

This will be something that the CSDMS facility will add

Main equations

A list of the key equations. HTML format is supported; latex format will be supported in the future

Notes

Any notes, comments, you want to share with the user

Numerical scheme

Examples

An example run with input parameters, BLD files, as well as a figure / movie of the output

Follow the next steps to include images / movies of simulations:

Upload file: http://csdms.colorado.edu/wiki/Special:Upload
Create link to the file on your page: [[Image:<file name>]].

Developer(s)

Name of the module developer(s)

References

Key papers

Links

Any link, eg. to the model questionnaire, etc.