Model help:AgDegNormal: Difference between revisions
Line 148: | Line 148: | ||
==Main equations== | ==Main equations== | ||
<math>C_{f}=\alpha _{r}\left ( \frac{H}{K_{c}} \right )^{\frac{1}{6}}</math> | <math>C_{f}=\alpha _{r}\left ( \frac{H}{K_{c}} \right )^{\frac{1}{6}}</math><br> | ||
<math>\frac{q_{t}}{{\sqrt{RgDD}}}=\alpha_{t}\left ( \frac{\varphi_{s}\tau _{b}}{\rho RgD} -\tau_{c}^* \right )^{n_{t}}</math> | <math>\frac{q_{t}}{{\sqrt{RgDD}}}=\alpha_{t}\left ( \frac{\varphi_{s}\tau _{b}}{\rho RgD} -\tau_{c}^* \right )^{n_{t}}</math> | ||
Revision as of 17:46, 7 January 2011
AgDegNormal
This module calculates a) the equilibrium sediment transport rate and b) the morphodynamic evolution of a reach due to a change in sediment input rate.
Model introduction
The module computes variation in river bed level η(x, t), where x denotes a streamwise coordinate and t denotes time, in a river with constant width B. The bed sediment is characterized in terms of a single grain size D and submerged specific gravity R. The reach under consideration has length L. Bed elevation at the downstream end is assumed to be fixed. The model is based on total bed material load. The model is 1D, assumes a rectangular channel and neglects wall effects.
By modifying the sediment feed rate (Gtf) at the upstream end, the river can be forced to aggrade or degrade to a new equilibrium. The module computes this evolution.
Model parameters
Uses ports
This will be something that the CSDMS facility will add
Provides ports
This will be something that the CSDMS facility will add
Main equations
[math]\displaystyle{ C_{f}=\alpha _{r}\left ( \frac{H}{K_{c}} \right )^{\frac{1}{6}} }[/math]
[math]\displaystyle{ \frac{q_{t}}{{\sqrt{RgDD}}}=\alpha_{t}\left ( \frac{\varphi_{s}\tau _{b}}{\rho RgD} -\tau_{c}^* \right )^{n_{t}} }[/math]
Notes
- The maximum number of computational nodes, M, is 99;
- The model calculates the water depth with a Chezy formulation, if only the Chézy coefficient is specified in the input text file. The code uses a Manning-Strickler formulation, when only the roughness height, kc, and the coefficient αr are given in the input text file.
- The model prompts user whether he would like to append some of the characteristic values for the initial and final equilibrium state to the output file, or write them in a separate file.
Examples
An example run with input parameters, BLD files, as well as a figure / movie of the output
Follow the next steps to include images / movies of simulations:
- Upload file: http://csdms.colorado.edu/wiki/Special:Upload
- Create link to the file on your page: [[Image:<file name>]].
See also: Help:Images or Help:Movies
Developer(s)
References
- Paola, C., Heller, P.L., and Angevine, C.L., 1992. The large-scale dynamics of grain-size variation in alluvial basins. 1: Theory. Basin Research, 4, 73-90.
- Meyer-Peter, E., and Müller, R., 1948. Formulas for bed-load transport Proceedings, 2nd Congress International Association for Hydraulic Research, Rotterdam, the Netherlands, 39-64.
Links
- Model:AgDegNormal
- http://vtchl.uiuc.edu/people/parkerg/word_files.htm (Chapter 14, "1D aggradation and degradation of rivers: normal flow assumption" of the e-book).