Model:WSGFAM: Difference between revisions
From CSDMS
m (changed order modelers) |
m (changed the modelers) |
||
Line 1: | Line 1: | ||
{{Infobox Model | {{Infobox Model | ||
|model name = WSGFAM | |model name = WSGFAM | ||
|developer = ''' | |developer = '''Scully''', Malcolm | ||
|one-line-description = Wave and current supported sediment gravity flow model | |one-line-description = Wave and current supported sediment gravity flow model | ||
|type = Model | |type = Model |
Revision as of 14:29, 6 August 2009
WSGFAM
Introduction
History
Papers
WSGFAM Questionnaire
Contact Information
Model: | "Wave and Current Supported Sediment Gravity Flow analytical model" |
Contact person: | Malcolm E. Scully |
Institute: | Virginia Institute of Marine Science |
City: | Gloucester Point, VA |
Country: | USA |
Email: | cfried@vims.edu |
2nd person involved: | Yanxia Ma |
3rd person involved: | Carl Friedrichs |
Model description
Model type: | Single model for the coastal domain. |
Description: | Simulates wave and current supported sediment gravity flows along the seabed offshore of high discharge, fine sediment riverine sources. See Friedrichs & Scully, 2007. Continental Shelf Research, 27: 322-337, for example. |
Technical information
Supported platforms: | UNIX, Linux, Mac OS X, Windows |
Programming language: | Matlab |
Model was developed started from: | 2000 and development still takes place |
To what degree will the model become available: | As code |
Current license type: | -- |
Memory requirements: | minimal |
Typical run time: | minimal |
Input / Output description
Input parameters: | Main inputs are bathymetry, riverine sediment discharge time-series, and ambient wave and current time-series. Critical velocity for sea bed erosion, bottom drag coefficient and critical bulk Richardson number can also be adjusted. |
Input format: | ASCII, matlab formats |
Output parameters: | Gravity flow velocity, Depth-integrated sediment load, down-slope sediment flux, flux convergence or divergence, erosion or deposition rate. |
Output format: | ASCII, matlab formats |
Post-processing software (if needed): | no |
Visualization software (if needed): | no |
Process description
Processes represented by model: | See Friedrichs & Scully, 2007. Continental Shelf Research, 27: 322-337 and references within. |
Key physical parameters & equations: | See Friedrichs & Scully, 2007. Continental Shelf Research, 27: 322-337 and references within. |
Length scale & resolution constraints: | -- |
Time scale & resolution constraints: | -- |
Numerical limitations and issues : | -- |
Testing
Available calibration data sets: | See Friedrichs & Scully, 2007. Continental Shelf Research, 27: 322-337 and references within. |
Available test data sets: | -- |
Ideal data for testing: | -- |
User groups
Currently or plans for collaborating with: | Not presently. |
Documentation
Key papers of the model: | See Friedrichs & Scully, 2007. Continental Shelf Research, 27: 322-337 and references within. |
Is there a manual available: | no |
Model website if any: | -- |
Additional comments
Comments: | -- |