Property:Describe available test data

From CSDMS

This is a property of type Text.

previous 202050100250500next 20
Showing 20 pages using this property.
1
1D Hillslope MCMC +
Hillslope morphology data from the Dragon's Back Pressure Ridge is included in packaged code.  +
W
WACCM-EE +
I have numerous data sets produced by an 8 processor Mac and a local unix cluster to confirm the model is initialized correctly.  +
B
BITM +
In order to verify the millennial-scale evolution of a barrier island, it is necessary to know the sea level curve, the rate of lagoonal deposition, the rate of overwash and the initial shelf profile. The BIT Model has been applied to the shelf profile in front of Sand Key, Florida.  +
H
Hilltop flow routing +
Input data used in the preparation of the associated manuscript is all available from www.opentopography.org along with all processing and visualization code at https://github.com/sgrieve/LH_Paper_Plotting so users can compare their results with those contained within the manuscript.  +
1
1DBreachingTurbidityCurrent +
MS thesis  +
W
WOFOST +
Model test data are available through https://github.com/ajwdewit/pcse and described in https://doi.org/10.1016/j.agwat.2019.105746  +
S
Shoreline +
Model was only used for modeling coastline change in the vicinity of Barrow, Alaska. Hourly wind data from a met station at the Barrow Airport was used to drive the model. High-resolution coastline data digitized from aerial photos by Manley et al. (2006) was used for initial and final coastlines. The latter was used for validation purposes. High-resolution DEMs were also used.  +
R
River Erosion Model +
Modeling testing performed on data from the lower Colorado River and North Fork Toutle River. Model input data available here: https://github.com/rodlammers/REM  +
H
HEBEM +
N/A  +
F
Frost Model +
N/A  +
I
ISSM +
Nightly runs are carried out on every SVN repository commit.  +
M
MARSSIM V4 +
None at present - forthcoming  +
G
GPM +
None available  +
W
WAVEWATCH III ^TM +
ONR test bed and others.  +
P
ParFlow +
ParFlow contains a directory of test cases that may be automated as a check of the code.  +
L
Lake-Permafrost with Subsidence +
Permafrost model can be tested with ground temperature time series at several depths. Lake model can be tested with known ice depths (though snow, not accounted for in model, can affect depth by several 10s of cm).  +
G
GEOtop +
Please look at the GEOtop website: http://www.slideshare.net/GEOFRAMEcafe/geotop-2008?type=powerpoint  +
C
CrevasseFlow +
Q(m^3/s): daily water discharge series, 365 by 1 matrix Qs(kg/s): daily sediment flux series, 365 by 1 matrix The trigger flood event is set at the 232th day  +
G
GEOMBEST++Seagrass +
Sample input and output files are included with the code.  +
GEOMBEST-Plus +
Sample input files used to create plots shown in manual.  +
Retrieved from "https://csdms.colorado.edu/csdms_wiki/index.php?title=Property:Describe_available_test_data&oldid=118308"