Model:Bedrock Fault Scarp

Bedrock Fault Scarp

Also known as
Model type	Single
Model part of larger framework
Note on status model
Date note status model

Incorporated models or components:

Spatial dimensions	2D
Spatial extent	Watershed-Scale, Reach-Scale
Model domain	Geodynamic, Terrestrial
One-line model description	This is a two-dimensional numerical model that computes the topographic evolution of the facet slope in the footwall of an active normal fault.
Extended model description	[[Extended model description::The code computes the formation of a hillslope profile above an active normal fault. It represents the hillslope as a set of points with vertical and horizontal (fault-perpendicular) coordinates. Points move due to a prescribed erosion rate (which may vary in time) and due to offset during earthquakes with a specified recurrence interval and slip rate. The model is described and illustrated in the following journal article: Tucker, G. E., S. W. McCoy, A. C. Whittaker, G. P. Roberts, S. T. Lancaster, and R. Phillips (2011), Geomorphic significance of postglacial bedrock scarps on normal-fault footwalls, J. Geophys. Res., 116, F01022, doi:10.1029/2010JF001861.]]

Keywords:	fault, erosion, hillslope, facet, spur, scarp, ,

Name	Greg Tucker
Type of contact	Model developer
Institute / Organization	Cooperative Institute for Research in Environmental Sciences (CIRES)
Postal address 1	Campus Box 399
Postal address 2	University of Colorado
Town / City	Boulder
Postal code	80309
State	Colorado
Country	United States
Email address	gtucker@colorado.edu
Phone	+1 303 492 6985
Fax	+1 303 492 2606

Supported platforms	Unix, Linux, Mac OS
Other platform
Programming language	Python
Other program language
Code optimized	Single Processor
Multiple processors implemented
Nr of distributed processors
Nr of shared processors
Start year development	2010
Does model development still take place?	No
If above answer is no, provide end year model development	2010
Code development status
When did you indicate the 'code development status'?
Model availability	As code
Source code availability (Or provide future intension)	Through CSDMS repository
Source web address
Source csdms web address	https://github.com/csdms-contrib/bedrock_fault_scarp
Program license type	GPL v2
Program license type other
Memory requirements
Typical run time	minutes

Describe input parameters	HILLSLOPE_LENGTH: length of hillslope, in meters NUMBER_OF_NODES: number of model nodes (initially) EROSION_RATE: slope-normal erosion rate in m/yr THRESHOLD_SLOPE: threshold slope angle (m/m) THROW_RATE: fault throw rate, meters per year FAULT_DIP: fault dip angle, degrees SEISMIC_INTERVAL: Time interval between earthquakes, in years RUN_DURATION: duration of run in years DT: time step duration in years OPT_ERO_VAR: option for time variation in erosion rate AMPLITUDE: amplitude of sinusoidal variation (m/yr) PERIOD: period of sinusoidal variation (yr) PHASE: phase offset for sinusoidal variation (degrees) DEL18O_FILENAME: name of file containing oxygen isotope curve DEL18O_POWER: exponent MIN_ERORATE: OPT_PLOT: option for plotting OPT_EPS_PLOT: option for output to .eps file PLOT_INTERVAL: time interval for plotting, in years
Input format	ASCII
Other input format
Describe output parameters	Simple ascii files containing x and z coordinates of points at end of run. Optional output of figure in .eps format.
Output format	ASCII
Other output format
Pre-processing software needed?	No
Describe pre-processing software
Post-processing software needed?	No
Describe post-processing software
Visualization software needed?	No
If above answer is yes
Other visualization software

Describe processes represented by the model	Weathering and erosion of bedrock on a hillslope; vertical and horizontal displacement due to earthquakes.
Describe key physical parameters and equations	[[Describe key physical parameters::See: Tucker, G. E., S. W. McCoy, A. C. Whittaker, G. P. Roberts, S. T. Lancaster, and R. Phillips (2011), Geomorphic significance of postglacial bedrock scarps on normal-fault footwalls, J. Geophys. Res., 116, F01022, doi:10.1029/2010JF001861.]]
Describe length scale and resolution constraints	Resolution on order of one to a few meters. Domain length grows over time, reaching order tens to hundreds of meters long.
Describe time scale and resolution constraints	Typical time scale of order tens to hundreds of thousands of years.
Describe any numerical limitations and issues

Describe available calibration data sets	[[Describe available calibration data::For case study see: Tucker, G. E., S. W. McCoy, A. C. Whittaker, G. P. Roberts, S. T. Lancaster, and R. Phillips (2011), Geomorphic significance of postglacial bedrock scarps on normal-fault footwalls, J. Geophys. Res., 116, F01022, doi:10.1029/2010JF001861.]]
Upload calibration data sets if available:
Describe available test data sets
Upload test data sets if available:
Describe ideal data for testing

Do you have current or future plans for collaborating with other researchers?

Is there a manual available?	No
Upload manual if available:
Model website if any
Model forum / discussion board

Comments

This part will be filled out by CSDMS staff

DOI model	10.1594/IEDA/100097
For model version	0.1
Year version submitted	2011
Link to file	https://csdms.colorado.edu/pub/models/doi-source-code/bedrock_fault_scarp-10.1594.IEDA.100097-0.1.tar.gz

Can be coupled with:

Model info

Authors

Source code

DOI

Model citations

QR-code

Link to this page

Other models by author

Publication(s)	Year	Type	Cited
Error: Table AuthorsMan not found. . . , , . [[\| (View/edit entry)]]		Bedrock Fault Scarp	Model overview	Template:SEM 1640367110
Error: Table AuthorsMan not found. . . , , . [[\| (View/edit entry)]]		Bedrock Fault Scarp	Source code ref.	0