Model:SedCas: Difference between revisions

Revision as of 09:57, 4 February 2022

Also known as
Model type	Single
Model part of larger framework
Note on status model
Date note status model

Incorporated models or components:

Spatial dimensions	1D
Spatial extent	Landscape-Scale, Watershed-Scale
Model domain	Hydrology
One-line model description	A probabilistic sediment cascade model for sediment production, storage and transfer
Extended model description	SedCas was developed for a debris-flow prone catchment in the Swiss Alps (Illgraben). It consists of two connected sediment reservoirs on the hillslope and in the channel, where sediment transfer is driven by (lumped) hydrological processes at the basin scale. Sediment is stochastically produced by shallow landslides and rock avalanches and delivered to the hillslope and channel reservoirs. From there, it is evacuated out of the basin in the form of debris flows and sediment-laden floods.

Keywords:

Name	Jacob Hirschberg
Type of contact
Institute / Organization	Swiss Federal Research Institute WSL ETH Zurich
Postal address 1
Postal address 2
Town / City	Zurich
Postal code	CH-8903
State
Country	Switzerland
Email address	jacob_hirschberg@hotmail.com
Phone
Fax

Supported platforms
Other platform
Programming language	Python
Other program language
Code optimized
Multiple processors implemented
Nr of distributed processors
Nr of shared processors
Start year development
Does model development still take place?	No
If above answer is no, provide end year model development
Code development status	Active
When did you indicate the 'code development status'?	2022
Model availability
Source code availability (Or provide future intension)
Source web address
Source csdms web address
Program license type	GPL v3
Program license type other
Memory requirements
Typical run time

Describe input parameters
Input format	ASCII
Other input format
Describe output parameters
Output format	ASCII
Other output format
Pre-processing software needed?	No
Describe pre-processing software
Post-processing software needed?	No
Describe post-processing software
Visualization software needed?	No
If above answer is yes
Other visualization software

Describe processes represented by the model
Describe key physical parameters and equations
Describe length scale and resolution constraints
Describe time scale and resolution constraints
Describe any numerical limitations and issues

Describe available calibration data sets
Upload calibration data sets if available:
Describe available test data sets
Upload test data sets if available:
Describe ideal data for testing

Do you have current or future plans for collaborating with other researchers?

Is there a manual available?	No
Upload manual if available:
Model website if any
Model forum / discussion board

Comments

This part will be filled out by CSDMS staff

OpenMI compliant	Not yet"Not yet" is not in the list (Yes, No but planned, No but possible, No not possible) of allowed values for the "Code openmi compliant or not" property.
BMI compliant	Not yet"Not yet" is not in the list (Yes, No but planned, No but possible, No not possible) of allowed values for the "BMICompliant" property.
WMT component	Not yet"Not yet" is not in the list (Yes, In progress, No but possible, No not possible) of allowed values for the "Code CMT compliant or not" property.
PyMT component	Not yet"Not yet" is not in the list (Yes, In progress, No but possible, No not possible) of allowed values for the "Code PyMT compliant or not" property.
Is this a data component	No

Can be coupled with:

Model info

Authors

Source code

DOI

Model citations

QR-code

Link to this page

Other models by author

Featured publication(s)	Year	Model described	Type of Reference	Citations
Hirschberg, Jacob; Fatichi, Simone; Bennett, Georgina L.; McArdell, Brian W.; Peleg, Nadav; Lane, Stuart N.; Schlunegger, Fritz; Molnar, Peter; 2021. Climate Change Impacts on Sediment Yield and Debris‐Flow Activity in an Alpine Catchment. Journal of Geophysical Research: Earth Surface, 126, . 10.1029/2020JF005739 (View/edit entry)	2021	SedCas	Model application	40
Bennett, G. L.; Molnar, P.; McArdell, B. W.; Burlando, P.; 2014. A probabilistic sediment cascade model of sediment transfer in the Illgraben. Water Resources Research, 50, 1225–1244. 10.1002/2013WR013806 (View/edit entry)	2014	SedCas	Model overview	74
See more publications of SedCas

@@ Line 68: / Line 68: @@
 {{#ifexist:Template:{{PAGENAME}}-citation-indices|{{{{PAGENAME}}-citation-indices}}|}}<br>
 {{Include_featured_references_models_cargo}}<br>
-Hirschberg, J., Fatichi, S., Bennett, G. L., McArdell, B. W., Peleg, N., Lane, S. N., Schlunegger, F., Molnar, P. (2021). Climate Change Impacts on Sediment Yield and Debris-Flow Activity in an Alpine Catchment. Journal of Geophysical Research: Earth Surface, 126, e2020JF005739. https://doi.org/10.1029/2020JF005739
-Bennett, G. L., P. Molnar, B. W. McArdell, and P. Burlando (2014), A probabilistic sediment cascade model of sediment transfer in the Illgraben, Water Resour. Res., 50, 1225– 1244, https://doi.org/10.1002/2013WR013806.
 == Issues ==