Model:HEBEM: Difference between revisions

Revision as of 17:32, 23 June 2011

Name	Jeffrey Niemann
Type of contact	Model developer
Institute / Organization	Colorado State University
Postal address 1	Dept of Civil and Environmental Engineering
Postal address 2	Campus Delivery 1372
Town / City	Fort Collins
Postal code	80523
State	Colorado
Country	USA"USA" is not in the list (Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, ...) of allowed values for the "Country" property.
Email address	jniemann@engr.colostate.edu
Phone	970 491 3517
Fax	970 491 7727

Also known as
Model type	Single
Model part of larger framework
Note on status model
Date note status model

Keywords:

Supported platforms	Unix
Other platform
Programming language	Fortran77, Fortran90, C
Other program language
Code optimized
Multiple processors implemented
Nr of distributed processors
Nr of shared processors
Start year development	2001
Does model development still take place?	Yes
If above answer is no, provide end year model development
Code development status
When did you indicate the 'code development status'?
Model availability
Source code availability (Or provide future intension)
Source web address
Source csdms web address
Program license type	Other
Program license type other	--
Memory requirements	--
Typical run time	--

Describe input parameters	A grid with initial elevation. Hydrologic time step and geomorphic time step Hydrologic paramters: average rainfall intensity, rainall duration, interstorm period, infiltration capacity, porosity, hydraulic conductivity, aquifer depth, specific yield, PET Geomorphic parameters: baselevel lowering rate, diffusivity for hillslope processes, weathering rate, parameters for erosion and sediment transport model
Input format	ASCII
Other input format
Describe output parameters	elevations of all nodes elevation changes of all nodes
Output format	ASCII
Other output format
Pre-processing software needed?	No
Describe pre-processing software
Post-processing software needed?	No
Describe post-processing software
Visualization software needed?	No
If above answer is yes
Other visualization software

Describe processes represented by the model	Hydrologic processes: Precipitation, infiltration, evapotranspiration, overland flow, saturation-excess runoff, groundwater flow Geomorphic processes: Baselevel lowering, weathering, hillslope processes, erosion, sediment transport
Describe key physical parameters and equations	Infiltration capacity, water balance equation Hydraulic conductivity, 2-D Dupuit groundwater movement equation
Describe length scale and resolution constraints	A grid with 100x100 cells, Typical cells with a resolution of 40x40m
Describe time scale and resolution constraints	Time scale of 10,000 years. Typical time step is 3 hour
Describe any numerical limitations and issues	N/A

Describe available calibration data sets	The hydrologic model was calibrated using hydrologic measurements of WE-38 watershed in PA
Upload calibration data sets if available:
Describe available test data sets	N/A
Upload test data sets if available:
Describe ideal data for testing	N/A

Do you have current or future plans for collaborating with other researchers?	None

Is there a manual available?	No
Upload manual if available:
Model website if any
Model forum / discussion board

Comments	None

This part will be filled out by CSDMS staff

OpenMI compliant	No but possible
BMI compliant	No but possible
WMT component	Not yet"Not yet" is not in the list (Yes, In progress, No but possible, No not possible) of allowed values for the "Code CMT compliant or not" property.
PyMT component
Is this a data component

Can be coupled with:

Model info

Authors

Jeffrey Niemann

Huang

Source code

Model citations

QR-code

Link to this page

Other models by author

@@ Line 20: / Line 20: @@
 {{Model identity
 |Model type=Single
+|Categories=Terrestrial
 |Spatial dimensions=2D
 |One-line model description=Hydrologically Enhanced Basin Evolution Model
 |Extended model description=The Hydrologically Enhanced Basin Evolution Model (HEBEM) is a combined hydrologic/geomorphic model. The hydrologic model simulates precipitation with variability, infiltration, evapotranspiration, overland flow, and groundwater flow, thus producing a spatially and temporally varying water discharge Q that drives fluvial processes in the land surface. The geomorphic model accounts for tectonic forcing, hillslope processes, erosion, and sediment transport. The combined model uses multiple time steps for hydrologic and geomorphic processes. Due to its hydrologic representation, the model is able to investigate the interaction between hydrology and geomorpholgy.
 }}
+{{Start model keyword table}}
+{{End a table}}
 {{Model technical information
 |Supported platforms=Unix
@@ Line 82: / Line 85: @@
 |CCA component=No but possible
 |IRF interface=No but possible
+|CMT component=Not yet
 }}
+{{Start coupled table}}
+{{End a table}}
 {{End headertab}}
 <!-- Edit the part above to update info on other papers -->