Model:LateralVerticalIncision: Difference between revisions

Revision as of 09:43, 30 June 2017

Also known as	Lateral vs. Vertical Incison in alluvial channels.
Model type	Single
Model part of larger framework
Note on status model
Date note status model

Incorporated models or components:

Spatial dimensions	1.5D
Spatial extent	Landscape-Scale, Watershed-Scale, Reach-Scale
Model domain	Terrestrial
One-line model description	Geometric model to explore autogenic increase of vertical incision rate in entrenching alluvial rivers.
Extended model description	A model to explore how increasingly tall valley walls constrain the river lateral erosion and promote vertical incision. Each run is unique as a random walk controls the lateral migration of the channel. To store and compare repeated runs with identical parameters, there is a built in system to save the results of each run. This model is used to illustrate the wall feedback concept proposed by Malatesta, Prancevic, Avouac; 2017; JGR Eath-Surface; doi:10.1002/2015JF003797

Keywords:	Meander center line, river,

Name	Luca Malatesta
Type of contact	Model developer
Institute / Organization	UC Santa Cruz
Postal address 1	Earth & Planetary Sciences Department
Postal address 2	1156 High St.
Town / City	Santa Cruz
Postal code	95064
State	California
Country	United States
Email address	lcmalate@ucsc.edu
Phone
Fax

Supported platforms	Linux, Mac OS, Windows
Other platform
Programming language	Matlab
Other program language
Code optimized	Single Processor
Multiple processors implemented
Nr of distributed processors
Nr of shared processors
Start year development	2013
Does model development still take place?	No
If above answer is no, provide end year model development	2015
Code development status
When did you indicate the 'code development status'?
Model availability	As code
Source code availability (Or provide future intension)	Through CSDMS repository
Source web address
Source csdms web address	https://github.com/csdms-contrib/Lateral-Vertical-Incision
Program license type	GPL v2
Program license type other
Memory requirements
Typical run time	5 to 30 mn.

Describe input parameters	Geometric parameters of river reach and erosion capacity.
Input format	ASCII
Other input format
Describe output parameters	Geometry of river entrenchment thought time
Output format	ASCII
Other output format
Pre-processing software needed?	No
Describe pre-processing software
Post-processing software needed?	No
Describe post-processing software
Visualization software needed?	No
If above answer is yes
Other visualization software

Describe processes represented by the model	Incision of a transport-limited river in an alluvial substrate. Initial geometry is that of a steep channel with sediment transport capacity exceeding that of the input flux from upstream. The river randomly migrates left or right and needs to evacuate sediments mined from its bed and from the valley walls. Product of wall erosion not evacuated by the river are deposited as taluses at the foot of the walls.
Describe key physical parameters and equations	The model uses geometric laws that mimic the behaviour of Meyer-Peter Mueller (1948) sediment transport capacity laws as a function of slope and width.
Describe length scale and resolution constraints	The model is made of a series (5 to 100) of across-river profiles to model a river reach ca. 5 to 50 km in length and 1 to 20 km in width.
Describe time scale and resolution constraints	There is no explicit time, every time step is a bankfull event. With the parameters published here, vertical incision rates correspond to rates on the order of cm/yr.
Describe any numerical limitations and issues	The profiles should not be spaced too closely in order to avoid an unstable saw-tooth longitudinal profile of the river.

Describe available calibration data sets	n/a
Upload calibration data sets if available:
Describe available test data sets	n/a
Upload test data sets if available:
Describe ideal data for testing	n/a

Do you have current or future plans for collaborating with other researchers?	No

Is there a manual available?	No
Upload manual if available:
Model website if any
Model forum / discussion board

Comments	This model supports the article Malatesta, L. C., J. P. Prancevic, and J.-P. Avouac (2017), Autogenic entrenchment patterns and terraces due to coupling with lateral erosion in incising alluvial channels, J. Geophys. Res. Earth Surf., 122, 335–355, doi:10.1002/2015JF003797.

This part will be filled out by CSDMS staff

Can be coupled with:

Model info

Authors

Source code

Model citations

QR-code

Link to this page

Other models by author

Publication(s)	Year	Type	Cited
Error: Table AuthorsMan not found. . . , , . [[\| (View/edit entry)]]		LateralVerticalIncision	Model overview	Template:SEM 2528686645

@@ Line 42: / Line 42: @@
 |End year development=2015
 |Model availability=As code
+|Source code availability=Through CSDMS repository
+|Source csdms web address=https://github.com/csdms-contrib/Lateral-Vertical-Incision
 |Program license type=GPL v2
 |Typical run time=5 to 30 mn.