Model:GPM: Difference between revisions

From CSDMS
m added model
 
m Text replacement - "{{End headertab}}" to "{{End headertab}} {{{{PAGENAME}}_autokeywords}}"
 
(28 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Infobox Model
{{Model identity
|model name              = GPM
|Model type=Single
|developer                = '''Tetzlaff''', Daniel
|one-line-description    = Sedimentary process modeling software
|type                     = Model
|source                  = [[image:Red1.png]]
}}
}}
<!-- Edit the part above to update info on other papers -->
{{Start models incorporated}}
{{End a table}}
{{Model identity2
|ModelDomain=Coastal, Terrestrial
|One-line model description=Sedimentary process modeling software
|Extended model description=Another derivative of the original SEDSIM, completely rewritten from scratch. It uses finite differences (in addition to the original particle-cell method) to speed up steady flow calculations. It also incorporates compaction algorithms. A general description has been published.
}}
{{Start model keyword table}}
{{Model keywords
|Model keywords=geologic process
}}
{{Model keywords
|Model keywords=sedimentary record
}}
{{Model keywords
|Model keywords=compaction
}}
{{End a table}}
{{Modeler information
|First name=Daniel
|Last name=Tetzlaff
|Type of contact=Technical contact
|Institute / Organization=Schlumberger
|Postal address 1=5599 San Felipe Ave.
|Postal address 2=suite 1700
|Town / City=Houston
|Postal code=77063
|State=Texas
|Country=United States
|Email address=dtetzlaff@slb.com
|Phone=713-513-2182
}}
{{Model technical information
|Supported platforms=Windows
|Programming language=C++
|Start year development=2001
|Does model development still take place?=No
|End year development=2006
|Program license type=Other
|Program license type other=--
|Memory requirements=2GB
|Typical run time=20 minutes
}}
{{Input - Output description
|Describe input parameters=Initial topography.


== GPM ==
Initial subsurface layering, if any.
__TOC__
Properties of existing rocks/sediments.
Sea-level change curve.
Sources of flow and sediment, sources of wave action, boundary conditions Externally imposed vertical tectonics as a function of horizontal position and time
|Input format=ASCII
|Describe output parameters=Free-surface flow and wave action through time.


===Introduction===
Erosion and deposition through time.
Optionally, compaction, including porosity reduction.
|Output format=ASCII
|Pre-processing software needed?=No
|Post-processing software needed?=No
|Visualization software needed?=Yes
|Other visualization software=Proprietary
}}
{{Process description model
|Describe processes represented by the model=Free-surface flow including wave action


=== History ===
Clastic erosion, transport, deposition
Compaction (load-based, vertical porous flow, full 3D porous flow)
Rudimentary carbonate growth
|Describe key physical parameters and equations=Shallow-water equations for fluid flow
Separate equations for wave propagation
Shield's criterion and transport capacity criterion for clastic transport (similar to SEDSIM)
Sigle-phase flow in porous media for vertical and 3D compaction options.
|Describe length scale and resolution constraints=From a few hundred m to a few hundred Km
|Describe time scale and resolution constraints=From seconds to about 100,000 years.
|Describe any numerical limitations and issues=Can be very slow in complex systems.
}}
{{Model testing
|Describe available calibration data sets=None available
|Describe available test data sets=None available
|Describe ideal data for testing=Laboratory and field data of free-surface flow and clastic transport rates.
}}
{{Users groups model
|Do you have current or future plans for collaborating with other researchers?=I am interested in collaboration, but it may be difficult due to proprietary restrictions.
}}
{{Documentation model
|Provide key papers on model if any=Papers:
*'''Tetzlaff, D.M., and Schafmeister, M.-T., 2007, Interaction among sedimentation, compaction, and groundwater flow in coastal settings, The Geological Society of America, Special Paper 426. Doi: ([http://dx.doi.org/10.1130/2007.2426(05) 10.1130/2007.2426(05)]).'''


=== Papers ===
*'''Tetzlaff, D.M., 2005. Modelling Coastal Sedimentation through Geologic Time. Journal of Coastal Research, 21(3), 610~617. Doi: ([http://dx.doi.org/10.2112/04-704A.1 10.2112/04-704A.1])'''


=== GPM Questionnaire ===
*'''Tetzlaff, D.M. and Harbaugh, J.W., 1989. Simulating Clastic Sedimentation. New York: van Nostrand Rheinold Series on Computer Methods in Geosciences, 202p'''
|Manual model available=No
}}
{{Additional comments model
|Comments=This model is unlikely to become available in any form other than snapshots of output. It is provided for reference.
}}
{{CSDMS staff part
|OpenMI compliant=No but possible
|CCA component=No but possible
|IRF interface=No but possible
|CMT component=No but possible
}}
{{Start coupled table}}
{{End a table}}
{{End headertab}}
{{{{PAGENAME}}_autokeywords}}


==== Contact Information ====
{{NOINDEX}}
{| class="wikitable"
<!-- Edit the part above to update info on other papers -->
| class="model_col1"| Model:
| class="model_col2"| Geologic Process Modeler (GPM)
|-
| class="model_col1"| Contact person:
| class="model_col2"| Daniel Tetzlaff
|-
| class="model_col1"| Institute:
| class="model_col2"| Schlumberger
|-
| class="model_col1"| City:
| class="model_col2"| Houston, TX
|-
| class="model_col1"| Country:
| class="model_col2"| USA
|-
| class="model_col1"| Email:
| class="model_col2"| dtetzlaff@slb.com
|-
| class="model_col1"| 2nd person involved:
| class="model_col2"| --
|-
| class="model_col1"| 3rd person involved:
| class="model_col2"| --
|}
 
==== Model description ====
 
{| class="wikitable" 
| class="model_col1"| Model type:
| class="model_col2"| Single model for the terrestrial, coastal and marine domain.
|-
| class="model_col1"| Description:
| class="model_col2"| Another derivative of the original SEDSIM, completely rewritten from scratch. It uses finite differences (in addition to the original particle-cell method) to speed up steady flow calculations. It also incorporates compaction algorithms. A general description has been published.
|}
 
==== Technical information ====
 
{| class="wikitable" 
| class="model_col1"| Supported platforms:
| class="model_col2"| Windows
|-
| class="model_col1"| Programming language:
| class="model_col2"| C_plus
|-
| class="model_col1"| Model was developed started from:
| class="model_col2"| 2001 and was finished in 2006
|-
| class="model_col1"| To what degree will the model become available:
| class="model_col2"| Not
|-
| class="model_col1"| Current license type:
| class="model_col2"| --
|-
| class="model_col1"| Memory requirements:
| class="model_col2"| 2GB
|-
| class="model_col1"| Typical run time:
| class="model_col2"| 20 minutes
|}
 
==== Input / Output description ====
 
{| class="wikitable" 
| class="model_col1"| Input parameters:
| class="model_col2"| Initial topography. <br>
Initial subsurface layering, if any.<br>
Properties of existing rocks/sediments.<br>
Sea-level change curve.<br>
Sources of flow and sediment, sources of wave action, boundary conditions
Externally imposed vertical tectonics as a function of horizontal position and time
|-
| class="model_col1"| Input format:
| class="model_col2"| ASCII
|-
| class="model_col1"| Output parameters:
| class="model_col2"| Free-surface flow and wave action through time.<br>
Erosion and deposition through time.<br>Optionally, compaction, including porosity reduction.   
|-
| class="model_col1"| Output format:
| class="model_col2"| ASCII
|-
| class="model_col1"| Post-processing software (if needed):
| class="model_col2"| no (Post processing not needed, but important for visualization and data conversion).
|-
| class="model_col1"| Visualization software (if needed):
| class="model_col2"| yes, Proprietary
|}
 
==== Process description ====
 
{| class="wikitable" 
| class="model_col1"| Processes represented by model:
| class="model_col2"| Free-surface flow including wave action
Clastic erosion, transport, deposition<br>Compaction (load-based, vertical porous flow, full 3D porous flow)<br>Rudimentary carbonate growth
|-
| class="model_col1"| Key physical parameters & equations:
| class="model_col2"| Shallow-water equations for fluid flow<br>Separate equations for wave propagation<br>Shield's criterion and transport capacity criterion for clastic transport (similar to SEDSIM)<br>Sigle-phase flow in porous media for vertical and 3D compaction options.
|-
| class="model_col1"| Length scale & resolution constraints:
| class="model_col2"| From a few hundred m to a few hundred Km
|-
| class="model_col1"| Time scale & resolution constraints:
| class="model_col2"| From seconds to about 100,000 years.
|-
| class="model_col1"| Numerical limitations and issues :
| class="model_col2"| Can be very slow in complex systems.
|}
 
==== Testing ====
 
{| class="wikitable" 
| class="model_col1"| Available calibration data sets:
| class="model_col2"| None available
|-
| class="model_col1"| Available test data sets:
| class="model_col2"| None available
|-
| class="model_col1"| Ideal data for testing:
| class="model_col2"| Laboratory and field data of free-surface flow and clastic transport rates.
|}
 
==== User groups ====
 
{| class="wikitable" 
| class="model_col1"| Currently or plans for collaborating with:
| class="model_col2"| I am interested in collaboration, but it may be difficult due to proprietary restrictions.
|}
 
==== Documentation ====
 
{| class="wikitable" 
| class="model_col1"| Key papers of the model:
| class="model_col2"| '''Tetzlaff, D.M., and Schafmeister, M.-T.''', 2007, Interaction among sedimentation, compaction, and groundwater flow in coastal settings, /in /Harff, J., Hay, W.W.<br>'''Tetzlaff, D.M.''', eds., Coastline Changes: Interrelation of Climate and Geological Processes: Geological Society of America Special Paper 426, p. 65–87.
|-
| class="model_col1"| Is there a manual available:
| class="model_col2"| --
|-
| class="model_col1"| Model website if any:
| class="model_col2"| --
|}
 
==== Additional comments ====
 
{| class="wikitable" 
| class="model_col1"| Comments:
| class="model_col2"| This model is unlikely to become available in any form other than snapshots of output. It is provided for reference.
|}


=== Issues ===
==Introduction==


=== Help ===
== History ==


=== Input Files ===
== References  ==
<br>{{AddReferenceUploadButtons}}<br><br>
{{#ifexist:Template:{{PAGENAME}}-citation-indices|{{{{PAGENAME}}-citation-indices}}|}}<br>
{{Include_featured_references_models_cargo}}<br>


=== Output Files ===
== Issues ==


=== Download ===
== Help ==
{{#ifexist:Model_help:{{PAGENAME}}|[[Model_help:{{PAGENAME}}]]|}}


=== Source ===
== Input Files ==


== Output Files ==


[[Category:Terrestrial]]
[[Category:Source code not available]]
[[Category:Coastal]]
[[Category:Marine]]

Latest revision as of 20:13, 16 September 2020



GPM


Metadata

Also known as
Model type Single
Model part of larger framework
Note on status model
Date note status model
Incorporated models or components:
Spatial dimensions
Spatial extent
Model domain Coastal, Terrestrial
One-line model description Sedimentary process modeling software
Extended model description Another derivative of the original SEDSIM, completely rewritten from scratch. It uses finite differences (in addition to the original particle-cell method) to speed up steady flow calculations. It also incorporates compaction algorithms. A general description has been published.
Keywords:

geologic process, sedimentary record, compaction,

Name Daniel Tetzlaff
Type of contact Technical contact
Institute / Organization Schlumberger
Postal address 1 5599 San Felipe Ave.
Postal address 2 suite 1700
Town / City Houston
Postal code 77063
State Texas
Country United States
Email address dtetzlaff@slb.com
Phone 713-513-2182
Fax


Supported platforms
Windows
Other platform
Programming language

C++

Other program language
Code optimized
Multiple processors implemented
Nr of distributed processors
Nr of shared processors
Start year development 2001
Does model development still take place? No
If above answer is no, provide end year model development 2006
Code development status
When did you indicate the 'code development status'?
Model availability
Source code availability
(Or provide future intension)
Source web address
Source csdms web address
Program license type Other
Program license type other --
Memory requirements 2GB
Typical run time 20 minutes


Describe input parameters Initial topography.

Initial subsurface layering, if any. Properties of existing rocks/sediments. Sea-level change curve. Sources of flow and sediment, sources of wave action, boundary conditions Externally imposed vertical tectonics as a function of horizontal position and time

Input format ASCII
Other input format
Describe output parameters Free-surface flow and wave action through time.

Erosion and deposition through time. Optionally, compaction, including porosity reduction.

Output format ASCII
Other output format
Pre-processing software needed? No
Describe pre-processing software
Post-processing software needed? No
Describe post-processing software
Visualization software needed? Yes
If above answer is yes
Other visualization software Proprietary


Describe processes represented by the model Free-surface flow including wave action

Clastic erosion, transport, deposition Compaction (load-based, vertical porous flow, full 3D porous flow) Rudimentary carbonate growth

Describe key physical parameters and equations Shallow-water equations for fluid flow

Separate equations for wave propagation Shield's criterion and transport capacity criterion for clastic transport (similar to SEDSIM) Sigle-phase flow in porous media for vertical and 3D compaction options.

Describe length scale and resolution constraints From a few hundred m to a few hundred Km
Describe time scale and resolution constraints From seconds to about 100,000 years.
Describe any numerical limitations and issues Can be very slow in complex systems.


Describe available calibration data sets None available
Upload calibration data sets if available:
Describe available test data sets None available
Upload test data sets if available:
Describe ideal data for testing Laboratory and field data of free-surface flow and clastic transport rates.


Do you have current or future plans for collaborating with other researchers? I am interested in collaboration, but it may be difficult due to proprietary restrictions.
Is there a manual available? No
Upload manual if available:
Model website if any
Model forum / discussion board
Comments This model is unlikely to become available in any form other than snapshots of output. It is provided for reference.


This part will be filled out by CSDMS staff

OpenMI compliant No but possible
BMI compliant No but possible
WMT component No but possible
PyMT component
Is this a data component
Can be coupled with:
Model info
Authors
Daniel Tetzlaff
Source code
Model citations
Nr. of publications: --
Total citations: 0
h-index: --"--" is not a number.
m-quotient: 0
QR-code

Link to this page
Other models by author

Template:GPM autokeywords


Introduction

History

References



Nr. of publications: --
Total citations: 0
h-index: --"--" is not a number.
m-quotient: 0


See more publications of GPM

Issues

Help

Input Files

Output Files

Retrieved from "https://csdms.colorado.edu/csdms_wiki/index.php?title=Model:GPM&oldid=299723"