Model help:DeltaBW: Difference between revisions
From CSDMS
No edit summary |
mNo edit summary |
||
| Line 285: | Line 285: | ||
| q<sub>w</sub> | | q<sub>w</sub> | ||
| water discharge / width | | water discharge / width | ||
| | | L<sup>2</sup> / T | ||
|- | |- | ||
| C<sub>z</sub> | | C<sub>z</sub> | ||
| Line 297: | Line 293: | ||
| D | | D | ||
| grain size of sediment | | grain size of sediment | ||
| | | L | ||
|- | |- | ||
| R | | R | ||
| Line 313: | Line 309: | ||
| η<sub>d</sub> | | η<sub>d</sub> | ||
| water surface elevation of the lake | | water surface elevation of the lake | ||
| | | L | ||
|- | |- | ||
| S<sub>fl</sub> | | S<sub>fl</sub> | ||
| Line 321: | Line 317: | ||
| s<sub>fl</sub> | | s<sub>fl</sub> | ||
| initial length of fluvial zone | | initial length of fluvial zone | ||
| | | L | ||
|- | |- | ||
| S<sub>a</sub> | | S<sub>a</sub> | ||
| Line 329: | Line 325: | ||
| Δ<sub>t</sub> | | Δ<sub>t</sub> | ||
| time step | | time step | ||
| | | T | ||
|- | |- | ||
| M | | M | ||
| Line 345: | Line 341: | ||
| x | | x | ||
| downstream coordinate | | downstream coordinate | ||
| | | L | ||
|- | |- | ||
| η | | η | ||
| bed surface elevation | | bed surface elevation | ||
| | | L | ||
|- | |- | ||
| q<sub>b</sub> | | q<sub>b</sub> | ||
| volume bedload transport per unit width | | volume bedload transport per unit width | ||
| | | L<sup>2</sup> / T | ||
|- | |- | ||
| H | | H | ||
| water depth | | water depth | ||
| | | L | ||
|- | |- | ||
| τ | | τ | ||
| shear stress | | shear stress | ||
| | | - | ||
|- | |- | ||
| s<sub>U</sub> | | s<sub>U</sub> | ||
| location of the upstream coordinate | | location of the upstream coordinate | ||
| | | L | ||
|- | |- | ||
| s<sub>bb</sub> | | s<sub>bb</sub> | ||
| reach of the alluvium bottom | | reach of the alluvium bottom | ||
| | | L | ||
|- | |- | ||
| s<sub>ss</sub> | | s<sub>ss</sub> | ||
| reach of the alluvium top | | reach of the alluvium top | ||
| | | L | ||
|- | |- | ||
| etaup | | etaup | ||
| upstream bed surface elevation | | upstream bed surface elevation | ||
| | | L | ||
|- | |- | ||
| etatop | | etatop | ||
| bed surface elevation of the top of the forest | | bed surface elevation of the top of the forest | ||
| | | L | ||
|- | |- | ||
| etabot | | etabot | ||
| bed surface elevation of the bottom of the forest | | bed surface elevation of the bottom of the forest | ||
| | | L | ||
|- | |- | ||
| q | | q | ||
| flood discharge | | flood discharge | ||
| | | L<sup>2</sup> / T | ||
|- | |- | ||
| I<sub>f</sub> | | I<sub>f</sub> | ||
| Line 397: | Line 393: | ||
| Q | | Q | ||
| upstream bed material sediment feed rate during floods | | upstream bed material sediment feed rate during floods | ||
| | | L<sup>2</sup> / T | ||
|- | |- | ||
| D | | D | ||
| grain diameter | | grain diameter | ||
| | | L | ||
|- | |- | ||
| E | | E | ||
| elevation of the top of the forest | | elevation of the top of the forest | ||
| | | L | ||
|- | |- | ||
| e | | e | ||
| initial elevation of the bottom of the forest | | initial elevation of the bottom of the forest | ||
| | | L | ||
|- | |- | ||
| f | | f | ||
| Line 421: | Line 417: | ||
| s | | s | ||
| initial length of the fluvial zone | | initial length of the fluvial zone | ||
| | | L | ||
|- | |- | ||
| L | | L | ||
| Line 445: | Line 441: | ||
| t | | t | ||
| time step | | time step | ||
| | | T | ||
|- | |- | ||
| p | | p | ||
| Line 536: | Line 532: | ||
| q<sub>bT</sub> | | q<sub>bT</sub> | ||
| total volume gravel bedload transport rate per unit width summed over all sizes | | total volume gravel bedload transport rate per unit width summed over all sizes | ||
| | | L<sup>2</sup> / T | ||
|- | |- | ||
| v | | v | ||
| flow velocity | | flow velocity | ||
| | | L / T | ||
|- | |- | ||
| τ<sub>sg</sub> | | τ<sub>sg</sub> | ||
| shield stress | | shield stress | ||
| | | - | ||
|- | |- | ||
|} | |} | ||
Revision as of 14:33, 26 May 2011
DeltaBW
This is used to Calculate evolution of long profile of a river ending in a 1D migrating delta, using a backwater formulation.
Model introduction
This program calculates bed surface evolution for a narrowly channelized1D fan-delta prograding into standing water using a backwater formulation, as well as calculating the final water surface of the system and the mass balance of sediment in the system.
Model parameters
Uses ports
This will be something that the CSDMS facility will add
Provides ports
This will be something that the CSDMS facility will add
Main equations
- Water surface elevation
[math]\displaystyle{ \eta = \eta_{f}[s_{s} \left (t\right ), t] - S_{a}[x - s_{s}\left ( t \right )] }[/math] (1)
- Exner equation for shock condition
[math]\displaystyle{ \left ( 1 - \lambda_{p} \right ) \int _{s_{s}\left (t\right )} ^ \left ( s_{b} \left (t\right ) \right ){\frac{\partial \eta}{\partial t}} d x = I_{f} \{q_{t}[s_{s}\left (t \right ), t] - q_{t} [s_{b}\left (t\right ),t] \} }[/math] (2)
[math]\displaystyle{ \dot{s_{s}} = {\frac{1}{\left (S_{a} - S_{s} \right )}}[{\frac{I_{f} q_{ts}}{\left ( 1 - \lambda_{p}\right ) \left (s_{b} - s_{s} \right )}} - {\frac{\partial \eta _{f}}{\partial t}}|_{s_{s}}] }[/math] (3)
[math]\displaystyle{ \left (S_{a} - S_{b} \right ) \dot{s}_{b} = \left (S_{a} - S_{s}\right ) \dot{s}_{s} + {\frac{\partial \eta _{f}}{\partial t}}|_{s_{s}} }[/math] (4)
- Moving boundary coordinate
[math]\displaystyle{ \hat{x} = {\frac{x}{S_{s}\left (t\right )}} }[/math] (5)
[math]\displaystyle{ \hat{t} = t }[/math] (6)
- Exner equation for moving-boundary coordinate
[math]\displaystyle{ \left ( 1 - \lambda_{p} \right ) [\left ({\frac{\partial \eta_{f}}{\partial \hat{t}}} - {\frac{\dot{s}_{s}}{s_{s}}} \hat{x} {\frac{\partial \eta_{f}}{\partial \dot{x}}}\right )] = - {\frac{1}{s_{s}}} I_{f} {\frac{\partial q_{t}}{\partial \dot{x}}} }[/math] (7)
- Shock condition for moving-boundary coordinate
[math]\displaystyle{ \left (s_{b} - s_{s} \right )[{\frac{\partial \eta_{f}}{\partial \hat{t}}}|_{\hat{x} = 1} + S_{a} \dot{s}_{s}] = {\frac{I_{f} q_{t} \left (1, \hat{t}\right )}{\left ( 1 - \lambda_{p}\right )}} }[/math] (8)
- Continuity condition for moving-boundary coordinate
[math]\displaystyle{ \dot{s}_{b} = {\frac{S_{a} \dot{s}_{s} + {\frac{\partial \eta _{f}}{\partial \hat{t}}}|_{\hat{x} = 1}}{\left ( S_{a} - S_{b}\right )}} }[/math] (9)
- Sediment transport relation
1) Total bed material transport
[math]\displaystyle{ q_{t} = \sqrt{R g D} D q_{t} ^* }[/math] (10)
[math]\displaystyle{ q_{t}^* = \alpha_{t}[\tau^* - \tau_{c}^*]^ \left (n_{t}\right ) }[/math] (11)
- Backwater formula
[math]\displaystyle{ {\frac{dH}{d \hat{x}}} = s_{s} {\frac{S - S_{f}}{1 - Fr^2}} }[/math] (12)
[math]\displaystyle{ S = - {\frac{1}{s_{s}}} {\frac{\partial \eta _{f}}{\partial \hat{x}}} }[/math] (13)
[math]\displaystyle{ Fr^2 = {\frac{q_{w}^2}{g H^3}} }[/math] (14)
[math]\displaystyle{ S_{f} = C_{f} Fr^2 }[/math] (15)
[math]\displaystyle{ H \left (1,t\right ) = \xi_{s} \left (\hat{t} \right ) - \eta_{f} \left (1,\hat{t} \right ) }[/math] (16)
[math]\displaystyle{ \tau^* = {\frac{\tau_{b}}{\rho R g D}} = {\frac{C_{f} U^2}{R g D}} = {\frac{C_{f} {\frac{q_{w}^2}{H^2}}}{R g D}} }[/math] (17)
- Boundary conditions
[math]\displaystyle{ s_{s} \left ( \hat{t} + \Delta \hat{t} \right ) = s_{s} \left (\hat{t}\right ) + \dot{s}_{s} \Delta \hat{t} }[/math] (18)
[math]\displaystyle{ s_{b} \left ( \hat{t} + \Delta \hat{t} \right ) = s_{b} \left (\hat{t}\right ) + \dot{s}_{b} \Delta \hat{t} }[/math] (19)
[math]\displaystyle{ \eta_{b} \equiv \eta [S_{b} \left (\hat{t} \right ), \hat{t}] = \eta_{d} - S_{s} \left ( s_{b} - s_{s}\right ) }[/math] (20)
- Calculation of derivatives
[math]\displaystyle{ {\frac{\partial \eta}{\partial \hat{x}}}|_{i} = \left\{\begin{matrix} {\frac{\eta_{i+1} - \eta_{i}}{\Delta \hat{x}}} & i = 1 \\ {\frac{\eta_{i+1} - \eta_{i-1}}{2 \Delta \hat{x}}} & i = 2...M \\ {\frac{\eta_{i} - \eta_{i-1}}{\Delta \hat{x}}} & i = M+1 \end{matrix}\right. }[/math] (21)
[math]\displaystyle{ {\frac{\partial q_{t}}{\partial \hat{x}}}|_{i} = \left\{\begin{matrix} {\frac{q_{t,i} - q_{tf}}{ \Delta \hat{x}}} & i = 1 \\ {\frac{q_{t,i} - q_{t,i-1}}{ \Delta \hat{x}}} & 1 \lt i \lt = M+1 \end{matrix}\right. }[/math] (22)
Nomenclature
| Symbol | Description | Unit |
|---|---|---|
| qw | water discharge / width | L2 / T |
| Cz | dimensionless Chezy resistance coefficient | - |
| D | grain size of sediment | L |
| R | submerged specific gravity of sediment | - |
| λp | bed porosity | - |
| nt | exponent in load relation | - |
| ηd | water surface elevation of the lake | L |
| Sfl | initial fluvial bed slope | - |
| sfl | initial length of fluvial zone | L |
| Sa | slope of foreset face | - |
| Δt | time step | T |
| M | number of fluvial nodes | - |
| Mtoprint | number of steps until a printout is made | - |
| Mprint | number of printouts after the initial one | - |
| x | downstream coordinate | L |
| η | bed surface elevation | L |
| qb | volume bedload transport per unit width | L2 / T |
| H | water depth | L |
| τ | shear stress | - |
| sU | location of the upstream coordinate | L |
| sbb | reach of the alluvium bottom | L |
| sss | reach of the alluvium top | L |
| etaup | upstream bed surface elevation | L |
| etatop | bed surface elevation of the top of the forest | L |
| etabot | bed surface elevation of the bottom of the forest | L |
| q | flood discharge | L2 / T |
| If | flood intermittency | - |
| Q | upstream bed material sediment feed rate during floods | L2 / T |
| D | grain diameter | L |
| E | elevation of the top of the forest | L |
| e | initial elevation of the bottom of the forest | L |
| f | initial fluvial bedslope | - |
| b | subaqueous basement slope | - |
| s | initial length of the fluvial zone | L |
| L | bed porosity | - |
| k | coefficient in the Manning-Strickler relation | - |
| a | coefficient in the total bed material load relation | - |
| r | coefficient in the Manning-Strickler relation | - |
| M | number of fluvial nodes | - |
| t | time step | T |
| p | number of prints | - |
| i | number of iterations per print | - |
| ηs(t) | bed elevation at the topset-foreset break | L |
| ηb(t) | bed elevation at the foreset-bottomset break | L |
| ss(t) | coordinate corresponds to the topset-foreset break | L |
| sb(t) | coordinate corresponds to the foreset-bottomset break | L |
| qt | volume total bed material transport rate per unit
width |
L2 / T |
| qtf | upstream sediment feed rate | L2 / T |
| ηf(x,t) | bed elevation on the fluvial region | L |
| dot{s}s | prograding rate of the delta at the topset-foreset break | L / T |
| dot{s}b | prograding rate of the delta at the foreset-bottomset break | L / T |
| Ss | bed slope of the fluvial region at the topset-foreset break | - |
| x^ | dimensionless downstream coordinate | - |
| t^ | dimensionless time | - |
| qt * | Einstein number for total bed material | - |
| αt | coefficient in generic relation for total bed material load | - |
| τ* | Shields number | - |
| τc * | critical Shields number at the threshold of motion | - |
| Cf | bed friction coefficient | - |
| S | down-channel bed slope | - |
Output
| Symbol | Description | Unit |
|---|---|---|
| qbT | total volume gravel bedload transport rate per unit width summed over all sizes | L2 / T |
| v | flow velocity | L / T |
| τsg | shield stress | - |
Notes
This module is a calculator for 1D Subaerial Fluvial Fan-Delta with Channel of Constant Width. This model assumes a narrowly channelized 1D fan-delta prograding into standing water. The model uses a single grain size D, a generic total bed material load relation and a constant bed resistance coefficient. The channel is assumed to have a constant width. Water and sediment discharge are specified per unit width.The channel is assumed to have a constant width. Water and sediment discharge are specified per unit width. The fan builds outward by forming a prograding delta front with an assigned foreset slope. The code employs a full backwater calculation.
In the normal flow formulation, for any given time t = t^: a) Specify the downstream bed elevation ηd
b) Calculate the backwater curve upstream from x^ = 1.
c) Use this to evaluate qt everywhere, including qts at x^ = 1.
d) Implement the shock condition to find dot{s}s. This shock condition requires knowledge of the term d ηf / d t^ |x^ = 1 . It is sufficient to evaluate this term using the current bed profile and that obtained one step earlier, at t^ = 0, this term can be ignored.
e) Solve Exner everywhere to find new bed elevations at time Δt^ later.
f) Use continuity condition to find dot{s}b.
- Note on model running
A uniform grain size is assumed, and the same choice of Manning Strickler or Chézy is posed to the user.
The fan builds outward by forming a prograding delta front with an assigned foreset slope.
If the flow becomes supercritical, the backwater calculation will fail, so the program automatically alerts the user and exits.
The initial depth at the top of the foreset must be greater than the critical water depth Hcrit; if it isn't the program will alert the user and exit
Examples
An example run with input parameters, BLD files, as well as a figure / movie of the output
Follow the next steps to include images / movies of simulations:
- Upload file: http://csdms.colorado.edu/wiki/Special:Upload
- Create link to the file on your page: [[Image:<file name>]].
See also: Help:Images or Help:Movies
Developer(s)
References
- Grover, N.C., and Howard, C.L., 1937, The passage of turbid water through Lake Mead, Transactions, American Society of Civil Engineers, 103, 720-732.
- Kostic, S. and Parker, G., 2003a, Progradational sand-mud deltas in lakes and reservoirs. Part 1. Theory and numerical modeling, Journal of Hydraulic Research, 41(2), 127-140.
- Kostic, S. and Parker, G., 2003b, Progradational sand-mud deltas in lakes and reservoirs. Part 2. Experiment and numerical simulation, Journal of Hydraulic Research, 41(2), 141-152
- Swenson, J. B., Voller, V. R., Paola, C., Parker G. and Marr J., 2000, Fluvio-deltaic sedimentation: a generalized Stefan problem, European Journal of Applied Math., 11, 433-452.
