Lab-0032: Difference between revisions

Revision as of 14:22, 25 May 2023

Data Component Use Case for Permafrost Thaw and Hillslope Diffusion

Model
Kudryavtsev Model

Duration
1.5 hrs

Updated
2023-05-04

Download
download

Run online using:

Contributor(s)

Tian Gan at INSTAAR - University of Colorado Boulder.

Greg Tucker at Geological Sciences - University of Colorado Boulder.

Irina Overeem at Geological Sciences - University of Colorado Boulder.

Ethan Pierce at Geological Sciences - University of Colorado Boulder.

Introduction

Permafrost is defined as any material (rock or soil) that remains below 0°C for two or more consecutive years. This lab demonstrates how to use several CSDMS data components (https://csdms.colorado.edu/wiki/DataComponents) to download topography, snow and temperature data and couple them with the Model Components from Landlab and Pymt to calculate the permafrost active layer thickness and simulate the hillslope diffusion process for a study area in Alaska.

Classroom organization
Permafrost covers nearly 85% of Alaska. The map shows the permafrost distribution in this area (Picture source https://permafrost.gi.alaska.edu/sites/default/files/AlaskaPermafrostMap_Front_Dec2008_Jorgenson_etal_2008.pdf). A warming climate brought higher temperatures which may cause some permafrost to thaw. This can lead to geologic hazards such as landslides, ground subsidence, erosion and other severe surface distortions.

In this lab, we will use the Kudryavtsev (Ku) model (a pymt component) to calculate the active layer thickness for Eight Mile Lake in Alaska. Active layer is the top layer of the permafrost where the annual maximum temperature reaches 0°C and the temperature shift over diurnal and seasonal cycles. Then we will use the active layer thickness as the input for a Landlab component (DepthDependentDiffuser) to simulate the hillslope diffusion process. The ERA5 and Topography Data Components are used to prepare the inputs for the Ku model.

Learning objectives
Skills

Learn to use Data Components to download research datasets
Learn to couple Data and Model Components for simulation

Key concepts

Landlab
Pymt
CSDMS Data Component

Lab notes

This lab can be run on the lab (for educators) and jupyter (for general use) instances of the OpenEarthscape JupyterHub: just click one of the links under the Run online using heading at the top of this page, then run the notebook in the "CSDMS" kernel.

If you don't already have a JupyterHub account, follow the instructions to sign up at https://csdms.colorado.edu/wiki/JupyterHub. If you're an educator, you can get JupyterHub accounts for students--please contact us through the CSDMS Help Desk: https://csdms.github.io/help-desk.

Requirements
If run locally, please follow the instruction at https://github.com/gantian127/permafrost_usecase.

Acknowledgements
This work was supported by the National Science Foundation under collaborative grants 1831623, 2026951, 2140831, 2104102, and 2148762.

References

Anisimov, O. A., Shiklomanov, N. I., & Nelson, F. E. (1997). Global warming and active-layer thickness: results from transient general circulation models. Global and Planetary Change, 15(3-4), 61-77. https://doi.org/10.1016/S0921-8181(97)00009-X
Garnello, A., Marchenko, S., Nicolsky, D., Romanovsky, V., Ledman, J., Celis, G., Schädel, C., Luo, Y., & Schuur, E. A. G. (2021). Projecting Permafrost Thaw of Sub-Arctic Tundra With a Thermodynamic Model Calibrated to Site Measurements. Journal of Geophysical Research: Biogeosciences, 126(6), e2020JG006218. https://doi.org/10.1029/2020JG006218
Johnstone, S., Hilley, G. (2015). Lithologic control on the form of soil-mantled hillslopes, Geology 43(1), 83-86. https://doi.org/10.1130/G36052.1
Kudryavtsev, V. A., Garagulya, L. S., Kondrat'yeva, K. A., Melamed, V. G. (1974). Fundamentals of frost forecasting in geological engineering investigations Nauka, Moscow, p. 431. https://apps.dtic.mil/sti/pdfs/ADA039677.pdf
Zhang, T. (2005). Influence of the seasonal snow cover on the ground thermal regime: An overview. Reviews of Geophysics, 43(4). https://doi.org/10.1029/2004RG000157

@@ Line 33: / Line 33: @@
-In this lab, we will use the Kudryavtsev (Ku) model to calculate the active layer thickness for Eight Mile Lake in Alaska. Active layer is the top layer of the permafrost where the annual maximum temperature reaches 0°C and the temperature shift over diurnal and seasonal cycles. Then we will use the active layer thickness as the input for a Landlab component (DepthDependentDiffuser) to simulate the hillslope diffusion process. The ERA5 and Topography Data Components are used to prepare the inputs for the Ku model.
+In this lab, we will use the Kudryavtsev (Ku) model (a pymt component) to calculate the active layer thickness for Eight Mile Lake in Alaska. Active layer is the top layer of the permafrost where the annual maximum temperature reaches 0°C and the temperature shift over diurnal and seasonal cycles. Then we will use the active layer thickness as the input for a Landlab component (DepthDependentDiffuser) to simulate the hillslope diffusion process. The ERA5 and Topography Data Components are used to prepare the inputs for the Ku model.
 }}
 {{LabLearningObjectivesSkills
@@ Line 56: / Line 56: @@
 If you don't already have a JupyterHub account, follow the instructions to sign up at https://csdms.colorado.edu/wiki/JupyterHub. If you're an educator, you can get JupyterHub accounts for students--please contact us through the CSDMS Help Desk: https://csdms.github.io/help-desk.
-|LabNotesRequirements=If run locally, please use the environment yaml file to create a virtual environment and run the notebook (https://github.com/gantian127/permafrost_usecase/blob/master/environment.yml).
+|LabNotesRequirements=If run locally, please follow the instruction at https://github.com/gantian127/permafrost_usecase.
 |LabAcknowledgements=This work was supported by the National Science Foundation under collaborative grants 1831623, 2026951, 2140831, 2104102, and 2148762.
 }}