CSDMS Standard Names — Metadata Names

  • CSDMS Standard Names follow the pattern:
object + [ operation ] + quantity
These standard names are used as keys or indices that are used to access values, as well as associated metadata. The values (data) will often be accessed from memory, while the metadata will (most likely) be accessed from a Model Coupling Metadata (MCM) file. This document decribes MCM files and provides standardized strings to be used within them.
  • Assumptions are not included in the construction of CSDMS Standard Names, even though this is allowed in CF Standard Names. Here, assumption is used as a broad term that can include things like conditions, simplifications, approximations, limitations, conventions, provisos and other forms of clarification. There are at least 3 reasons for not including assumptions in standard names:

    1. When an automated system is trying to match variables (i.e. users to providers) in two different entities (e.g. models or databases), the assumption part of the name may prevent matches that we would want to allow, at least initially. We expect that the system will use the metadata to provide a user with details (or warnings) on how "good" a given match is. For example,

        channel_water_speed vs.
        channel_water_speed_assuming_diffusive_wave
        channel_water_speed_assuming_kinematic_wave

    2. We want to encourage model developers and database providers to list any and all assumptions that may be relevant in attached metadata (e.g., an RDF file). We are expecting that each user of a given standard name should provide an RDF file with metadata that describes how they interpret and use the name. This includes units, how measured (e.g. an angle could be CCW from north; an elevation could be relative to a datum, etc.) reference ellipsoid name, datums, model name and so on.

    3. Standard names that include many assumptions will become long and unwieldy. An otherwise valid match may be broken simply because one person provides a more complete list of assumptions than another.

  • CSDMS promotes a check all that apply approach where the XML tag <assume> is used numerous times to describe a model in detail. For example, a fluid dynamics model could provide the following list with six separate <assume> tags:
reynolds_averaged_navier_stokes_equation
mass_conserved
momentum_conserved
compressible_fluid
newtonian_fluid
no_slip_boundary_condition


Model Coupling Metadata (MCM) File Tags

  • Every model submitted to CSDMS should include its own Model Coupling Metadata (MCM) file, which is an XML file with a small number of standard tags as defined here.
  • MCM files should begin with a <model> tag. The MCM file construction could be extended to databases and perhaps called DCM files. DCM files would begin with a tag and would have <output_var> tags but no <input_var> tags.
  • The placement of these XML tags determines their scope. For example, if an <assume> tag is used within a <model> block but outside of any <input_var> or <output_var> block, then that assumption is understood as applying to the model as a whole. (For example: <assume> mass_conserved </assume>.) When used within an <input_var> or <output_var> block, an <assume> tag is understood to apply only to that variable. Similarly, an <ellipsoid> tag can be applied to an entire model or to a particular input or output variable.
  • Note that within a BMI-enabled model, CSDMS Standard Names are used as arguments to several of the BMI methods and in some cases as dictionary keys (e.g. python dictionaries). An MCM file may be read for the (automatic) implementation of some BMI getter methods that take "long_var_name" as an argument.
  • <model> tag. An MCM file begins with this tag. (A DCM file begins with the tag.)
  • <author> tag. Used to provide the full name of the model's author.
  • <grid_type> tag. Used to provide the model's grid type, which may be: uniform_grid, rectilinear_grid, structured_grid or unstructured_grid. These grid types are explained on the BMI_Description page. (In the future, BMI interfaces may be created automatically using information from MCM files.)
  • <time_step_type> tag. Used to provide the model's time step type, which may be: fixed, adaptive, des or none. These types are explained on the BMI_Description page. (In the future, BMI interfaces may be created automatically using information from MCM files.)
  • <input_var> tags. An MCM file must contain one of these tags for every input variable that the model wants to be able to retrieve from other components. The first thing provided in an <input_var> block is a <name> tag with a complete CSDMS Standard Name. Following the standard name, the block should contain additional, nested XML tags to provide information about how the variable is used by the model such as <units>, any number of <assume> tags, an optional <how_modeled> tag, and so on as explained below.
  • <output_var> tags. An MCM file must contain one of these tags for every output variable that the model wants to be able to provide to other components. As with the <input_var> tag, nested XML tags provide additional information.
  • <object> tags. CSDMS Standard Names always consist of an object name part and a quantity name part. Most of the assumptions that models make apply to the objects that the model uses and <object> tags are therefore used to provide assumptions that apply to the named object. These assumptions then extend to any standard name that includes that object name.
  • <var_group> tags. These tags can be used to group several input and/or output variables that have the same assumptions, data type or grid type so that the information doesn't have to be repeated for each <input_var> or <output_var> tag.
  • <name> tags. When nested within an <input_var> or <output_var> block, this must be a long variable name from the CSDMS Standard Names. When nested within a <model> block, this should be the "official" name of the model.
  • <assume> tags. A detailed list of standardized assumption names is given in the separate CSDMS Assumption Names document.
  • <option_group> and <option> tags. Some models support multiple options, each of which may have different assumptions, etc. An <option_group> tag encloses a block of 2 or more <option> tags. Each <option> tag identifies a model option, which includes an <assume> tag as well as other tags like <input_var> and <output_var> that the model may support when that option is selected (usually by setting a flag in the model's "configuration file". An <option_group> tag has a "type" attribute that must be set to one of the following: "select_one", "select_one_or_more" or "select_zero_or_more".
  • <units> tags. Units should be specified in the standard form used by Unidata's UDUNITS. (e.g. [kg m-1 s-2]).
  • <type> tag. Used to provide a variable's data type, which may be: int16, int32, float32, float64, etc. These types are explained on the BMI_Description page. (In the future, BMI interfaces may be created automatically using information from MCM files.)

Assumption Names


Units Names

  • CSDMS uses the standardized units names from Unidata's UDUNITS.
  • UDUNITS uses the following seven mutually independent SI Base Units and abbreviations:
meter m metre  (length)
kilogram kg    (mass)
second s       (time)
ampere A       (electric current)
kelvin K       (thermodynamic temperature)
mole mol       (amount of substance)
candela cd     (luminous intensity)
See: UDUNITS base units. Use "View Source" to see the XML tags.


Ellipsoid Names

Airy_1830
Airy_Modified_1849
Australian_National_Spheroid
Average_Terrestrial_System_1977
Bessel_1841
Bessel_Modified
Bessel_Namibia_GLM
CGCS2000
Clarke_1858
Clarke_1866
Clarke_1866_Authalic_Sphere
Clarke_1866_Michigan
Clarke_1880
Clarke_1880_Arc
Clarke_1880_Benoit
Clarke_1880_IGN
Clarke_1880_International_Foot
Clarke_1880_RGS
Clarke_1880_SGA_1922
Danish_1876
Everest_1830_1937_Adjustment
Everest_1830_1962_Definition
Everest_1830_1967_Definition
Everest_1830_1975_Definition
Everest_1830_Definition
Everest_1830_Modified
Everest_1830_RSO_1969
GEM_10C
GRS_1967
GRS_1967_Modified
GRS_1980
GRS_1980_Authalic_Sphere
Helmert_1906
Hough_1960
Hughes_1980
IAG_1975
Indonesian_National_Spheroid
International_1924
International_1924_Authalic_Sphere
Krassowsky_1940
NWL_9D
OSU86F
OSU91A
Plessis_1817
PZ-90
Struve_1860
War_Office
WGS_72
WGS_84


Datum Names


Projection Names

  • The CSDMS Standard Names use standard projection names from the EPSG Geodetic Parameter Registry. Within the EPSG registry, "projections" are included among the 109 Coordinate Operation Methods. Examples include: "Albers_Equal_Area", "Equidistant_Cylindrical", "Lambert_Azimuthal_Equal_Area", "Mercator_Spherical", "Oblique_Stereographic" and "Transverse_Mercator Zoned Grid System" (same as UTM?). However, EPSG doesn't seem to include many other well-known projections, such as many that are supported in GeoTIFF files and listed at: GeoTIFF Projections List.