From csdms
[edit] BEDLOAD
Contents |
[edit] Metadata
| Modeler information | |
|---|---|
| First name | Rudy |
| Last name | Slingerland |
| Type of contact | Model developer |
| Institute / Organization | Penn State University |
| Postal address 1 | 503A Deike Building |
| Postal address 2 | |
| Town / City | University Park |
| Postal code | 16802 |
| State | Pennsylvania |
| Country | USA |
| Email address | sling@geosc.psu.edu |
| Phone | +1 814 865-6892 |
| Fax | +1 814 865-3191 |
| Model identity | |
|---|---|
| Model type | Single |
| Spatial dimensions | |
| Spatial extent | |
| Model domain | |
| One-line model description | Bedload transport model |
| Extended model description | Calculates the bedload transport rates and weights per unit area for each size-density. NB. Bedload transport of different size-densities is proportioned according to the volumes in the bed. |
| Model technical information | |
|---|---|
| Supported platforms | Unix, Linux, Mac OS, Windows |
| Other platform | |
| Programming language | Fortran77 |
| Other program language | |
| Code optimized | Single Processor |
| Start year development | 1992 |
| Does model development still take place? | No |
| If above answer is no, provide end year model development | 1994 |
| Model availability | As code |
| Source code availability (Or provide future intension) | Through CSDMS repository |
| Source web address | |
| Program license type | Other |
| Program license type other | -- |
| OpenMI compliant | No but possible |
| CCA component | No but possible |
| IRF interface | No but possible |
| Memory requirements | <512MB |
| Typical run time | a few seconds |
| Input - Output description | |
|---|---|
| Describe input parameters | Proportion by mass of each size-density fraction in the bed, instantaneous turbulent grain shear velocities, critical shear stresses of each size-density fraction |
| Input format | ASCII |
| Other input format | |
| Describe output parameters | weight bedload transport rates of each size-density fraction |
| Output format | ASCII |
| Other output format | |
| Pre-processing software needed? | No |
| Describe pre-processing software | |
| Post-processing software needed? | No |
| Describe post-processing software | |
| Visualization software needed? | Yes |
| If above answer is yes | |
| Other visualization software | any software that can read ASCII data |
| Process description model | |
|---|---|
| Describe processes represented by the model | Mass flux per unit width, dry mass of grains moving over the unit bed area, calculates the suspendable amount present in the moving bed |
| Describe key physical parameters and equations | Bridge function, see Bridge and Dominic (1984) or Einstein's equation |
| Describe length scale and resolution constraints | -- |
| Describe time scale and resolution constraints | -- |
| Describe any numerical limitations and issues | -- |
| Model testing | |
|---|---|
| Describe available calibration data sets | See Slingerland et al. (1994) |
| Upload calibration data sets if available: | |
| Describe available test data sets | -- |
| Upload test data sets if available: | |
| Describe ideal data for testing | -- |
| Users groups model | |
|---|---|
| Do you have current or future plans for collaborating with other researchers? | None |
| Documentation model | |
|---|---|
| Provide key papers on model if any | Slingerland, R.L., K. Furlong and J. Harbaugh, 1994. Simulating Clastic Sedimentary Basins/Physical Fundamentals and Computing Procedures , Prentice Hall, Englewood Clifss, NJ:219 pp. |
| Is there a manual available? | No |
| Upload manual if available: | |
| Model website if any | ftp://ftp.geosc.psu.edu/sling/SimSedBasinsBook/ |
| Model forum / discussion board | |
| Additional comments | |
|---|---|
| Comments | |
[edit] Introduction
[edit] History
[edit] Papers
[edit] Issues
[edit] Help
[edit] Input Files
[edit] Output Files
[edit] Download
[edit] Source-Code Snapshots
Bedload is not a stand-alone model but is part of Midas. You can obtain it by downloading the Midas distribution and grabbing bedload.f from it.
Source-code snapshots of Midas are available via ftp at:
The latest version:
[edit] Source
Bedload is not a stand-alone model but is part of Midas. You can obtain the source code through the Midas repository or view the most recent version here: https://mp.colorado.edu/svn/midas/trunk/bedload.f.
The source code for Midas can be checked out from the CSDMS subversion repository using this command:
# Project members authenticate over HTTPS to allow committing changes. svn checkout https://csdms.colorado.edu/svn/midas
For help on using Subversion please see our help page.
